[PATCH v3] phy: rockchip-inno-usb2: Return zero after otg sync

[Peter Geis]

On Fri, Sep 2, 2022 at 1:35 PM Vinod Koul <vkoul at kernel.org> wrote:
>
> On 24-08-22, 08:25, Peter Geis wrote:
> > The otg sync state patch reuses the ret variable, but fails to set it to
> > zero after use. This leads to a situation when the otg port is in
> > peripheral mode where the otg phy aborts halfway through setup.  It also
> > fails to account for a failure to register the extcon notifier. Fix this
> > by using our own variable and skipping otg sync in case of failure.
> >
> > Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state")
> >
>
> No blank here please
>
> > Reported-by: Markus Reichl <m.reichl at fivetechno.de>
> > Reported-by: Michael Riesch <michael.riesch at wolfvision.net>
> > Signed-off-by: Peter Geis <pgwipeout at gmail.com>
> > Tested-by: Michael Riesch <michael.riesch at wolfvision.net>
> > Tested-by: Markus Reichl <m.reichl at fivetechno.de>
> > ---
> > Changelog:
> > v3
> > - add missing brackets around new goto
> > v2
> > - switch to using our own variable
> > - add missing goto to skip sync in case of registration failure
> > ---
> >  drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 9 ++++++---
> >  1 file changed, 6 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> > index 0b1e9337ee8e..27da5ba379c4 100644
> > --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> > +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> > @@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> >                                         struct rockchip_usb2phy_port *rport,
> >                                         struct device_node *child_np)
> >  {
> > -     int ret;
> > +     int ret, id;
> >
> >       rport->port_id = USB2PHY_PORT_OTG;
> >       rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
> > @@ -1163,12 +1163,15 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> >               ret = devm_extcon_register_notifier(rphy->dev, rphy->edev,
> >                                       EXTCON_USB_HOST, &rport->event_nb);
> >               if (ret)
> > +             {
>
> :-(
>
> this is _not_ linux kernel code style!
>
> Reminder: it always helps to run checkpatch

Ouch, yeah that's really embarrassing. Thank you for catching it.

>
> >                       dev_err(rphy->dev, "register USB HOST notifier failed\n");
> > +                     goto out;
> > +             }
> >
> >               if (!of_property_read_bool(rphy->dev->of_node, "extcon")) {
> >                       /* do initial sync of usb state */
> > -                     ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> > -                     extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret);
> > +                     id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> > +                     extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
> >               }
> >       }
> >
> > --
> > 2.25.1
>
> --
> ~Vinod