[PATCH v2 1/2] arm64: dts: rockchip: Add regulator suffix to rock-3a

[Chukun Pan]

Add -regulator suffix to regulator names on Radxa ROCK3 Model A
board. This makes the naming more consistent.

Signed-off-by: Chukun Pan <amadeus at jmu.edu.cn>
Acked-by: Michael Riesch <michael.riesch at wolfvision.net>
---
 arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index fb87a168fe96..8adf672709e8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -60,7 +60,7 @@ simple-audio-card,codec {
 		};
 	};
 
-	vcc12v_dcin: vcc12v-dcin {
+	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
 		regulator-always-on;
@@ -79,7 +79,7 @@ vcc3v3_pcie: vcc3v3-pcie-regulator {
 		vin-supply = <&vcc5v0_sys>;
 	};
 
-	vcc3v3_sys: vcc3v3-sys {
+	vcc3v3_sys: vcc3v3-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
 		regulator-always-on;
@@ -89,7 +89,7 @@ vcc3v3_sys: vcc3v3-sys {
 		vin-supply = <&vcc12v_dcin>;
 	};
 
-	vcc5v0_sys: vcc5v0-sys {
+	vcc5v0_sys: vcc5v0-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
 		regulator-always-on;
@@ -99,7 +99,7 @@ vcc5v0_sys: vcc5v0-sys {
 		vin-supply = <&vcc12v_dcin>;
 	};
 
-	vcc5v0_usb: vcc5v0-usb {
+	vcc5v0_usb: vcc5v0-usb-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_usb";
 		regulator-always-on;
@@ -109,7 +109,7 @@ vcc5v0_usb: vcc5v0-usb {
 		vin-supply = <&vcc12v_dcin>;
 	};
 
-	vcc5v0_usb_host: vcc5v0-usb-host {
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
@@ -144,7 +144,7 @@ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
 		vin-supply = <&vcc5v0_usb>;
 	};
 
-	vcc_cam: vcc-cam {
+	vcc_cam: vcc-cam-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
@@ -160,7 +160,7 @@ regulator-state-mem {
 		};
 	};
 
-	vcc_mipi: vcc-mipi {
+	vcc_mipi: vcc-mipi-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
-- 
2.25.1