[PATCH v7 06/10] ARM: dts: rockchip: Add Rockchip RV1126 SoC

[Jagan Teki]

On Wed, 9 Nov 2022 at 01:47, Johan Jonker <jbx6244 at gmail.com> wrote:
>
> Hi Jagan, Heiko,
>
> Have a look at some comment below.
>
> Johan
>
> On 11/8/22 05:13, Jagan Teki wrote:
> > RV1126 is a high-performance vision processor SoC for IPC/CVR,
> > especially for AI related application.
> >
> > It is based on quad-core ARM Cortex-A7 32-bit core which integrates
> > NEON and FPU. There is a 32KB I-cache and 32KB D-cache for each core
> > and 512KB unified L2 cache. It has build-in NPU supports INT8/INT16
> > hybrid operation and computing power is up to 2.0TOPs.
> >
> > This patch add basic core dtsi support.
> >
> > Signed-off-by: Jon Lin <jon.lin at rock-chips.com>
> > Signed-off-by: Sugar Zhang <sugar.zhang at rock-chips.com>
> > Signed-off-by: Jagan Teki <jagan at edgeble.ai>
> > ---
> > Changes for v7:
> > - fix dtbs_check
> > - rearrange nodes
> > - remove Edegble in license text
> > Changes for v6:
> > - add psci node
> > Changes for v5:
> > - none
> > Changes for v4:
> > - update i2c0
> > - rebase on -next
> > Changes for v3:
> > - update cru and power file names
> > Changes for v2:
> > - split pinctrl in separate patch
> >
> >  arch/arm/boot/dts/rv1126.dtsi | 438 ++++++++++++++++++++++++++++++++++
> >  1 file changed, 438 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/rv1126.dtsi
> >
> > diff --git a/arch/arm/boot/dts/rv1126.dtsi b/arch/arm/boot/dts/rv1126.dtsi
> > new file mode 100644
> > index 000000000000..a485420551f5
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/rv1126.dtsi
> > @@ -0,0 +1,438 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
> > + */
> > +
> > +#include <dt-bindings/clock/rockchip,rv1126-cru.h>
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > +#include <dt-bindings/power/rockchip,rv1126-power.h>
> > +#include <dt-bindings/soc/rockchip,boot-mode.h>
> > +
> > +/ {
> > +     #address-cells = <1>;
> > +     #size-cells = <1>;
> > +
> > +     compatible = "rockchip,rv1126";
> > +
>
> [..]
>
> > +     uart0: serial at ff560000 {
> > +             compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
> > +             reg = <0xff560000 0x100>;
> > +             interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> > +             clock-frequency = <24000000>;
> > +             clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
> > +             clock-names = "baudclk", "apb_pclk";
>
> > +             dmas = <&dmac 5>, <&dmac 4>;
>
>                 dma-names = "tx", "rx";
>
> DT describes hardware.
> Maybe add some dma-names ?

I think these are possible to add.

>
> ===
>
> 4 UART0 RX High level
> 5 UART0 TX High level
>
> 6 UART1 RX High level
> 7 UART1 TX High level
>
> 8 UART2 RX High level
> 9 UART2 TX High level
>
> 10 UART3 RX High level
> 11 UART3 TX High level
>
> 12 UART4 RX High level
> 13 UART4 TX High level
>
> 14 UART5 RX High level
> 15 UART5 TX High level
>
> > +             pinctrl-names = "default";
> > +             pinctrl-0 = <&uart0_xfer>;
> > +             reg-shift = <2>;
> > +             reg-io-width = <4>;
> > +             status = "disabled";
> > +     };
>
>
> [..]
>
>
> > +
> > +     timer: timer at ff660000 {
>
> timer0: timer at ff660000 {
>
> This is the first of 6 timers. Change label.

Okay.

>
> > +             compatible = "rockchip,rv1126-timer", "rockchip,rk3288-timer";
> > +             reg = <0xff660000 0x20>;
> > +             interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> > +             clocks = <&cru PCLK_TIMER>, <&cru CLK_TIMER0>;
> > +             clock-names = "pclk", "timer";
> > +     };
>
> Add possible more timer nodes ?

I think it is okay to go with timer0 in this basic version patchset,
will keep adding it in future patches.

Jagan.