[PATCH v7 06/10] ARM: dts: rockchip: Add Rockchip RV1126 SoC

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Tue Nov 8 10:13:28 PST 2022


On 08/11/2022 05:13, Jagan Teki wrote:
> RV1126 is a high-performance vision processor SoC for IPC/CVR,
> especially for AI related application.
> 
> It is based on quad-core ARM Cortex-A7 32-bit core which integrates
> NEON and FPU. There is a 32KB I-cache and 32KB D-cache for each core
> and 512KB unified L2 cache. It has build-in NPU supports INT8/INT16
> hybrid operation and computing power is up to 2.0TOPs.
> 
> This patch add basic core dtsi support.
> 
> Signed-off-by: Jon Lin <jon.lin at rock-chips.com>
> Signed-off-by: Sugar Zhang <sugar.zhang at rock-chips.com>
> Signed-off-by: Jagan Teki <jagan at edgeble.ai>
> ---
> Changes for v7:
> - fix dtbs_check
> - rearrange nodes
> - remove Edegble in license text
> Changes for v6:
> - add psci node
> Changes for v5:
> - none
> Changes for v4:
> - update i2c0
> - rebase on -next
> Changes for v3:
> - update cru and power file names
> Changes for v2:
> - split pinctrl in separate patch
> 
>  arch/arm/boot/dts/rv1126.dtsi | 438 ++++++++++++++++++++++++++++++++++
>  1 file changed, 438 insertions(+)
>  create mode 100644 arch/arm/boot/dts/rv1126.dtsi
> 
> diff --git a/arch/arm/boot/dts/rv1126.dtsi b/arch/arm/boot/dts/rv1126.dtsi
> new file mode 100644
> index 000000000000..a485420551f5
> --- /dev/null
> +++ b/arch/arm/boot/dts/rv1126.dtsi
> @@ -0,0 +1,438 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
> + */
> +
> +#include <dt-bindings/clock/rockchip,rv1126-cru.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/power/rockchip,rv1126-power.h>
> +#include <dt-bindings/soc/rockchip,boot-mode.h>
> +
> +/ {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	compatible = "rockchip,rv1126";
> +
> +	interrupt-parent = <&gic>;
> +
> +	aliases {
> +		i2c0 = &i2c0;
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +		serial2 = &uart2;
> +		serial3 = &uart3;
> +		serial4 = &uart4;
> +		serial5 = &uart5;

These are not properties of a SoC but board. They depend on the
particular routing on the board... unless this SoC is an exception from
all others?

> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +

(...)

> +
> +	uart5: serial at ff5a0000 {
> +		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
> +		reg = <0xff5a0000 0x100>;
> +		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <24000000>;
> +		clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
> +		dmas = <&dmac 15>, <&dmac 14>;
> +		clock-names = "baudclk", "apb_pclk";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&uart5m0_xfer>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		status = "disabled";
> +	};
> +
> +	saradc: saradc at ff5e0000 {

Node names should be generic, so adc.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +		compatible = "rockchip,rv1126-saradc", "rockchip,rk3399-saradc";
> +		reg = <0xff5e0000 0x100>;
> +		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> +		#io-channel-cells = <1>;
> +		clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
> +		clock-names = "saradc", "apb_pclk";
> +		resets = <&cru SRST_SARADC_P>;
> +		reset-names = "saradc-apb";
> +		status = "disabled";
> +	};
> +




Best regards,
Krzysztof




More information about the Linux-rockchip mailing list