[PATCH 26/56] ASoC: ux500: Update to use set_fmt_new callback

[Charles Keepax]

As part of updating the core to directly tell drivers if they are clock
provider or consumer update this CPU side driver to use the new direct
callback.

Signed-off-by: Charles Keepax <ckeepax at opensource.cirrus.com>
---
 sound/soc/ux500/ux500_msp_dai.c | 38 ++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/sound/soc/ux500/ux500_msp_dai.c b/sound/soc/ux500/ux500_msp_dai.c
index 21052378a32eb..cd6c4bdf5041d 100644
--- a/sound/soc/ux500/ux500_msp_dai.c
+++ b/sound/soc/ux500/ux500_msp_dai.c
@@ -191,8 +191,8 @@ static int setup_clocking(struct snd_soc_dai *dai,
 		return -EINVAL;
 	}
 
-	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-	case SND_SOC_DAIFMT_CBM_CFM:
+	switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+	case SND_SOC_DAIFMT_BC_FC:
 		dev_dbg(dai->dev, "%s: Codec is master.\n", __func__);
 
 		msp_config->iodelay = 0x20;
@@ -204,7 +204,7 @@ static int setup_clocking(struct snd_soc_dai *dai,
 
 		break;
 
-	case SND_SOC_DAIFMT_CBS_CFS:
+	case SND_SOC_DAIFMT_BP_FP:
 		dev_dbg(dai->dev, "%s: Codec is slave.\n", __func__);
 
 		msp_config->tx_clk_sel = TX_CLK_SEL_SRG;
@@ -328,15 +328,15 @@ static int setup_msp_config(struct snd_pcm_substream *substream,
 	dev_dbg(dai->dev, "%s: rate: %u, channels: %d.\n", __func__,
 		runtime->rate, runtime->channels);
 	switch (fmt &
-		(SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) {
-	case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
+		(SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK)) {
+	case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_BP_FP:
 		dev_dbg(dai->dev, "%s: SND_SOC_DAIFMT_I2S.\n", __func__);
 
 		msp_config->default_protdesc = 1;
 		msp_config->protocol = MSP_I2S_PROTOCOL;
 		break;
 
-	case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
+	case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_BC_FC:
 		dev_dbg(dai->dev, "%s: SND_SOC_DAIFMT_I2S.\n", __func__);
 
 		msp_config->data_size = MSP_DATA_BITS_16;
@@ -348,10 +348,10 @@ static int setup_msp_config(struct snd_pcm_substream *substream,
 
 		break;
 
-	case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
-	case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
-	case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBS_CFS:
-	case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBM_CFM:
+	case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_BP_FP:
+	case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_BC_FC:
+	case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_BP_FP:
+	case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_BC_FC:
 		dev_dbg(dai->dev, "%s: PCM format.\n", __func__);
 
 		msp_config->data_size = MSP_DATA_BITS_16;
@@ -477,7 +477,7 @@ static int ux500_msp_dai_prepare(struct snd_pcm_substream *substream,
 	}
 
 	/* Set OPP-level */
-	if ((drvdata->fmt & SND_SOC_DAIFMT_MASTER_MASK) &&
+	if ((drvdata->fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) &&
 		(drvdata->msp->f_bitclk > 19200000)) {
 		/* If the bit-clock is higher than 19.2MHz, Vape should be
 		 * run in 100% OPP. Only when bit-clock is used (MSP master)
@@ -544,13 +544,13 @@ static int ux500_msp_dai_set_dai_fmt(struct snd_soc_dai *dai,
 	dev_dbg(dai->dev, "%s: MSP %d: Enter.\n", __func__, dai->id);
 
 	switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK |
-		SND_SOC_DAIFMT_MASTER_MASK)) {
-	case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
-	case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
-	case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBS_CFS:
-	case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBM_CFM:
-	case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
-	case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
+		SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK)) {
+	case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_BP_FP:
+	case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_BC_FC:
+	case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_BP_FP:
+	case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_BC_FC:
+	case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_BP_FP:
+	case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_BC_FC:
 		break;
 
 	default:
@@ -707,7 +707,7 @@ static int ux500_msp_dai_probe(struct snd_soc_dai *dai)
 static const struct snd_soc_dai_ops ux500_msp_dai_ops[] = {
 	{
 		.set_sysclk = ux500_msp_dai_set_dai_sysclk,
-		.set_fmt = ux500_msp_dai_set_dai_fmt,
+		.set_fmt_new = ux500_msp_dai_set_dai_fmt,
 		.set_tdm_slot = ux500_msp_dai_set_tdm_slot,
 		.startup = ux500_msp_dai_startup,
 		.shutdown = ux500_msp_dai_shutdown,
-- 
2.30.2