[U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround

Wed May 18 15:56:38 PDT 2022

On Wed, May 18, 2022 at 7:56 AM Lee Jones <lee.jones at linaro.org> wrote:
>
> Looping int a few relevant/active kernel people/lists for full coverage.
>
> On Sun, 01 Dec 2019, Hugh Cole-Baker wrote:
> > > On 29 Nov 2019, at 01:06, Vasily Khoruzhick <anarsoul at gmail.com> wrote:
> > > On Thu, Nov 28, 2019 at 4:59 PM Kever Yang <kever.yang at rock-chips.com> wrote:
> > >>
> > >> Hi Vasily,
> > >>
> > >> On 2019/11/28 下午11:51, Vasily Khoruzhick wrote:
> > >>> On Thu, Nov 28, 2019 at 1:23 AM Kever Yang <kever.yang at rock-chips.com> wrote:
> > >>>> Hi Vasily,
> > >>>>
> > >>>>      I think this should not be needed, see comments below.
> > >>> Hi Kever,
> > >>>
> > >>> I've spent 2 weeks of my evenings debugging this issue but
> > >>
> > >> I can understand you work pretty hard on make it work, it's not so easy
> > >> to identify the root cause
> > >>
> > >> some times, thanks very much for working on this.
> > >>
> > >>> unfortunately I don't have a proper fix. This is the only solution
> > >>> that makes my rockpro64 reboot reliably with mainline u-boot and ATF.
> > >>> See my comments below.
> >
> > I also had a problem where Linux would hang or panic after rebooting, with
> > mainline u-boot and ATF on a rockpro64. This patch does fix the issue for me,
> > I have tested it by performing 10 reboots from Linux in a row and I've seen
> > no hangs or panics.
> >
> > I noticed the Armbian project have recently included a patch to ATF [1] which
> > switches all power domains on before ATF performs a soft reset. I have also
> > tested using u-boot mainline, without any patches to u-boot, but including ATF
> > patched with your reset fix [2] and the Armbian power domains patch [1]. This
> > also fixes the same hanging on reboot issue for me without modifications to
> > u-boot, I've also tested 10 reboots in a row with this ATF and seen no hangs.
> >
> > So this u-boot patch may not be needed if ATF is patched instead to switch
> > power domains on before soft reset.
> >
> > FWIW, when I was able to see panic messages from Linux when it panicked on
> > boot, the call trace always seemed to include rockchip_pd_power_off() [3].
> >
> > [1] https://github.com/armbian/build/blob/master/patch/atf/atf-rk3399/switch-power-domains-on-before-reset.patch
> > [2] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/2512
> > [3] https://gist.github.com/sigmaris/c0e155c8cb0a325d84f549185f9a568c
>
> This last paste looks remarkably similar to an issue currently seen on
> the Radxa ROCK Pi 4B (RK3399) during power-up after a soft reboot
> (`sudo reboot`) is issued.  We're presently running v5.15.35 [0].

Good Evening,

That's definitely not stock v5.15.35, it's been tagged as an android kernel.
5.15.35-android13-5-00092-g525d77310a20

>
> It's not clear how this issue (present 3 years ago) was finally
> resolved.  From the thread, it looks as if the fix might have made its
> way into ATF, but I'm 87.6% sure ATF is not running on this platform
> (yet).

The rk3399 SoC has a hardware bug where the power domains are not
reset upon a soft reset. This leads to situations like this one where
power domains are shut down during shutdown but aren't restored on
reboot. Mainline TF-A was patched to force all power domains online
when a soft reboot is triggered, which solved that issue. What
particular issues are you having initializing modern u-boot on this
device? Is there a particular reason it isn't using Mainline TF-A?

I've also run into issues on rk356x where the regulator powering a
power domain isn't powered due to a soft reset, which also causes
faults like this. Set your main regulators to always-on and see if it
helps with the issue.

Very Respectfully,
Peter Geis

>
> Note that the u-boot we're using is also quite old:
>
>   U-Boot 2019.10-09248-g8511c75bb4 (Jan 08 2020 - 17:13:03 -0800)
>
> ... so this could easily be the root cause.  The current plan is to
> try to update this ASAP.  However early attempts are yet to result in
> a successful boot.
>
> I see that Brian recently added a few patches related to PD/DVFS, but
> again, these appear to be ATF related.
>
> Would anyone be able to shed some light onto this for me please?
>
> As always, any help would be gratefully received.
>
> Kind regards,
> Lee
>
> [0]
> Full reboot log can be seen at: https://pastebin.ubuntu.com/p/MjZP2V6kQ3/
>
> [    0.699736][    T1] initcall __initstub__kmod_iommu__362_155_iommu_subsys_init4+0x0/0x8 returned 0 after 0 usecs
> [    0.700737][    T1] calling  __initstub__kmod_rockchip_iommu__348_1415_rk_iommu_init4+0x0/0x8 @ 1
> [    0.702238][    C5] SError Interrupt on CPU5, code 0xbf000002 -- SError
> [    0.702248][    C5] CPU: 5 PID: 48 Comm: kworker/5:1 Not tainted 5.15.35-android13-5-00092-g525d77310a20 #1
> [    0.702261][    C5] Hardware name: Radxa ROCK Pi 4B (DT)
> [    0.702266][    C5] Workqueue: pm genpd_power_off_work_fn.cfi_jt
> [    0.702289][    C5] pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [    0.702301][    C5] pc : regmap_mmio_read32le+0x14/0x2c
> [    0.702318][    C5] lr : regmap_mmio_read+0x68/0xd0
> [    0.702331][    C5] sp : ffffffc00b6d3b40
> [    0.702335][    C5] x29: ffffffc00b6d3b40 x28: 0000000000000000 x27: 0000000000000000
> [    0.702351][    C5] x26: ffffff8000923680 x25: ffffffc009abc2a0 x24: ffffff8000930c00
> [    0.702364][    C5] x23: 0000000000000014 x22: ffffff8000930c00 x21: 0000000000000008
> [    0.702378][    C5] x20: ffffff8000922300 x19: ffffff8000923680 x18: ffffffc00b66d058
> [    0.702391][    C5] x17: 000000000000ba7e x16: ffffffc00a4dee04 x15: 000000000000b67e
> [    0.702405][    C5] x14: 00000000028dd7a0 x13: 0000000000000040 x12: 0000000000000000
> [    0.702419][    C5] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000005
> [    0.702432][    C5] x8 : 0000000000000000 x7 : 00756d6d6f692e30 x6 : 3030383035366666
> [    0.702445][    C5] x5 : 0000000000000001 x4 : 028dea248fba33d6 x3 : 0000000000000000
> [    0.702457][    C5] x2 : ffffff8000923680 x1 : 0000000000000008 x0 : 0000000000000000
> [    0.702472][    C5] Kernel panic - not syncing: Asynchronous SError Interrupt
> [    0.702477][    C5] CPU: 5 PID: 48 Comm: kworker/5:1 Not tainted 5.15.35-android13-5-00092-g525d77310a20 #1
> [    0.702487][    C5] Hardware name: Radxa ROCK Pi 4B (DT)
> [    0.702492][    C5] Workqueue: pm genpd_power_off_work_fn.cfi_jt
> [    0.702506][    C5] Call trace:
> [    0.702508][    C5]  dump_backtrace.cfi_jt+0x0/0x8
> [    0.702525][    C5]  dump_stack_lvl+0x80/0xb8
> [    0.702536][    C5]  panic+0x180/0x444
> [    0.702547][    C5]  arm64_serror_panic+0x1c0/0x210
> [    0.702561][    C5]  do_serror+0x17c/0x218
> [    0.702572][    C5]  el1h_64_error_handler+0x38/0x50
> [    0.702581][    C5]  el1h_64_error+0x7c/0x80
> [    0.702589][    C5]  regmap_mmio_read32le+0x14/0x2c
> [    0.702603][    C5]  _regmap_bus_reg_read+0x3c/0x90
> [    0.702614][    C5]  _regmap_read+0xb0/0x24c
> [    0.702623][    C5]  rockchip_pd_power+0x6c4/0xbc0
> [    0.702638][    C5]  rockchip_pd_power_off+0x18/0x28
> [    0.702652][    C5]  _genpd_power_off+0x178/0x388
> [    0.702663][    C5]  genpd_power_off+0x188/0x2e4
> [    0.702673][    C5]  genpd_power_off_work_fn+0x54/0xe4
> [    0.702683][    C5]  process_one_work+0x254/0x5a0
> [    0.702696][    C5]  worker_thread+0x3ec/0x920
> [    0.702707][    C5]  kthread+0x168/0x1dc
> [    0.702716][    C5]  ret_from_fork+0x10/0x20
> [    0.702726][    C5] SMP: stopping secondary CPUs
>
> --
> Lee Jones [李琼斯]
> Principal Technical Lead - Developer Services
> Linaro.org │ Open source software for Arm SoCs
> Follow Linaro: Facebook | Twitter | Blog
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip