[PATCH v1 14/24] media: rkvdec: h264: Fix dpb_valid implementation
Sebastian Fricke
sebastian.fricke at collabora.com
Tue Mar 29 08:27:57 PDT 2022
Hey Nicolas,
On 28.03.2022 15:59, Nicolas Dufresne wrote:
>The ref builder only provided reference that are marked as valid in the
s/reference/references/
>dpb. Thus the current implementation of dpb_valid would always set the
>flag to 1. This is not representing missing frames (this is called
s/this is//
>'non-existing' pictures in the spec). In some context, these non-existing
>pictures still need occupy a slot in the reference list according to the
s/occupy/to occupy/
>spec.
>
>Signed-off-by: Nicolas Dufresne <nicolas.dufresne at collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke at collabora.com>
Greetings,
Sebastian
>---
> drivers/staging/media/rkvdec/rkvdec-h264.c | 33 ++++++++++++++++------
> 1 file changed, 24 insertions(+), 9 deletions(-)
>
>diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
>index 842d8cd80e90..db1e762baee5 100644
>--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
>+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
>@@ -112,6 +112,7 @@ struct rkvdec_h264_run {
> const struct v4l2_ctrl_h264_sps *sps;
> const struct v4l2_ctrl_h264_pps *pps;
> const struct v4l2_ctrl_h264_scaling_matrix *scaling_matrix;
>+ int ref_buf_idx[V4L2_H264_NUM_DPB_ENTRIES];
> };
>
> struct rkvdec_h264_ctx {
>@@ -725,6 +726,26 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
> }
> }
>
>+static void lookup_ref_buf_idx(struct rkvdec_ctx *ctx,
>+ struct rkvdec_h264_run *run)
>+{
>+ const struct v4l2_ctrl_h264_decode_params *dec_params = run->decode_params;
>+ u32 i;
>+
>+ for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) {
>+ struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
>+ const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
>+ struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
>+ int buf_idx = -1;
>+
>+ if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
>+ buf_idx = vb2_find_timestamp(cap_q,
>+ dpb[i].reference_ts, 0);
>+
>+ run->ref_buf_idx[i] = buf_idx;
>+ }
>+}
>+
> static void assemble_hw_rps(struct rkvdec_ctx *ctx,
> struct rkvdec_h264_run *run)
> {
>@@ -762,7 +783,7 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
>
> for (j = 0; j < RKVDEC_NUM_REFLIST; j++) {
> for (i = 0; i < h264_ctx->reflists.num_valid; i++) {
>- u8 dpb_valid = 0;
>+ u8 dpb_valid = run->ref_buf_idx[i] >= 0;
> u8 idx = 0;
>
> switch (j) {
>@@ -779,8 +800,6 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
>
> if (idx >= ARRAY_SIZE(dec_params->dpb))
> continue;
>- dpb_valid = !!(dpb[idx].flags &
>- V4L2_H264_DPB_ENTRY_FLAG_ACTIVE);
>
> set_ps_field(hw_rps, DPB_INFO(i, j),
> idx | dpb_valid << 4);
>@@ -859,13 +878,8 @@ get_ref_buf(struct rkvdec_ctx *ctx, struct rkvdec_h264_run *run,
> unsigned int dpb_idx)
> {
> struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
>- const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
> struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
>- int buf_idx = -1;
>-
>- if (dpb[dpb_idx].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
>- buf_idx = vb2_find_timestamp(cap_q,
>- dpb[dpb_idx].reference_ts, 0);
>+ int buf_idx = run->ref_buf_idx[dpb_idx];
>
> /*
> * If a DPB entry is unused or invalid, address of current destination
>@@ -1102,6 +1116,7 @@ static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
>
> assemble_hw_scaling_list(ctx, &run);
> assemble_hw_pps(ctx, &run);
>+ lookup_ref_buf_idx(ctx, &run);
> assemble_hw_rps(ctx, &run);
> config_registers(ctx, &run);
>
>--
>2.34.1
>
More information about the Linux-rockchip
mailing list