[PATCH v1 24/24] media: rkvdec-h264: Don't hardcode SPS/PPS parameters

[Nicolas Dufresne]

From: Alex Bee <knaerzche at gmail.com>

Some SPS/PPS parameters are currently hardcoded in the driver
even though so do exist in the uapi which is stable by now.

Use them instead of hardcoding them.

Conformance tests have shown there is no difference, but it might
increase decoder performance.

Signed-off-by: Alex Bee <knaerzche at gmail.com>
---
 drivers/staging/media/rkvdec/rkvdec-h264.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index 891c48bf6a51..91f65d78e453 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -655,13 +655,14 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
 
 #define WRITE_PPS(value, field) set_ps_field(hw_ps->info, field, value)
 	/* write sps */
-	WRITE_PPS(0xf, SEQ_PARAMETER_SET_ID);
-	WRITE_PPS(0xff, PROFILE_IDC);
-	WRITE_PPS(1, CONSTRAINT_SET3_FLAG);
+	WRITE_PPS(sps->seq_parameter_set_id, SEQ_PARAMETER_SET_ID);
+	WRITE_PPS(sps->profile_idc, PROFILE_IDC);
+	WRITE_PPS((sps->constraint_set_flags & 1 << 3) ? 1 : 0, CONSTRAINT_SET3_FLAG);
 	WRITE_PPS(sps->chroma_format_idc, CHROMA_FORMAT_IDC);
 	WRITE_PPS(sps->bit_depth_luma_minus8, BIT_DEPTH_LUMA);
 	WRITE_PPS(sps->bit_depth_chroma_minus8, BIT_DEPTH_CHROMA);
-	WRITE_PPS(0, QPPRIME_Y_ZERO_TRANSFORM_BYPASS_FLAG);
+	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS),
+		  QPPRIME_Y_ZERO_TRANSFORM_BYPASS_FLAG);
 	WRITE_PPS(sps->log2_max_frame_num_minus4, LOG2_MAX_FRAME_NUM_MINUS4);
 	WRITE_PPS(sps->max_num_ref_frames, MAX_NUM_REF_FRAMES);
 	WRITE_PPS(sps->pic_order_cnt_type, PIC_ORDER_CNT_TYPE);
@@ -679,8 +680,8 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
 		  DIRECT_8X8_INFERENCE_FLAG);
 
 	/* write pps */
-	WRITE_PPS(0xff, PIC_PARAMETER_SET_ID);
-	WRITE_PPS(0x1f, PPS_SEQ_PARAMETER_SET_ID);
+	WRITE_PPS(pps->pic_parameter_set_id, PIC_PARAMETER_SET_ID);
+	WRITE_PPS(pps->seq_parameter_set_id, PPS_SEQ_PARAMETER_SET_ID);
 	WRITE_PPS(!!(pps->flags & V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE),
 		  ENTROPY_CODING_MODE_FLAG);
 	WRITE_PPS(!!(pps->flags & V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT),
-- 
2.34.1