[PATCH 3/4 v5] dts: rockchip: Update regulator name for PX3

[Robin Murphy]

On 2022-03-03 20:39, Chris Morgan wrote:
> From: Chris Morgan <macromorgan at hotmail.com>
> 
> The regulator name of SWITCH_REG1 does not match any other board
> with a rk818 PMIC, nor does it correspond to a regulator in the
> rk808-regulator driver. Changing name to SWITCH_REG which is
> consistent with other boards and is in the driver.

The datasheet I found also names the channel "SWITCH" rather than 
"SWITCH1", so this seems correct to me.

Reviewed-by: Robin Murphy <robin.murphy at arm.com>

> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> ---
>   arch/arm/boot/dts/rk3188-px3-evb.dts | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
> index 39c60426c9c9..fc478ac4e781 100644
> --- a/arch/arm/boot/dts/rk3188-px3-evb.dts
> +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
> @@ -212,7 +212,7 @@ wl_18: LDO_REG8 {
>   				regulator-name = "wl_18";
>   			};
>   
> -			lcd_33: SWITCH_REG1 {
> +			lcd_33: SWITCH_REG {
>   				regulator-name = "lcd_33";
>   			};
>   		};