[PATCH] mmc: host: dw-mmc-rockchip: fix handling invalid clock rates

[Peter Geis]

On Thu, Mar 3, 2022 at 5:21 AM Ulf Hansson <ulf.hansson at linaro.org> wrote:
>
> On Thu, 3 Mar 2022 at 10:49, Peter Geis <pgwipeout at gmail.com> wrote:
> >
> > On Thu, Mar 3, 2022 at 2:53 AM Ulf Hansson <ulf.hansson at linaro.org> wrote:
> > >
> > > On Thu, 3 Mar 2022 at 02:52, Peter Geis <pgwipeout at gmail.com> wrote:
> > > >
> > > > The Rockchip ciu clock cannot be set as low as the dw-mmc hardware
> > > > supports. This leads to a situation during card initialization where the
> > > > ciu clock is set lower than the clock driver can support. The
> > > > dw-mmc-rockchip driver spews errors when this happens.
> > > > For normal operation this only happens a few times during boot, but when
> > > > cd-broken is enabled (in cases such as the SoQuartz module) this fires
> > > > multiple times each poll cycle.
> > > >
> > > > Fix this by testing the minimum frequency the clock driver can support
> > > > that is within the mmc specification, then divide that by the internal
> > > > clock divider. Set the f_min frequency to this value, or if it fails,
> > > > set f_min to the downstream driver's default.
> > > >
> > > > Fixes: f629ba2c04c9 ("mmc: dw_mmc: add support for RK3288")
> > > >
> > > > Signed-off-by: Peter Geis <pgwipeout at gmail.com>
> > > > ---
> > > >  drivers/mmc/host/dw_mmc-rockchip.c | 31 ++++++++++++++++++++++++++----
> > > >  1 file changed, 27 insertions(+), 4 deletions(-)
> > > >
> > > > diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
> > > > index 95d0ec0f5f3a..c198590cd74a 100644
> > > > --- a/drivers/mmc/host/dw_mmc-rockchip.c
> > > > +++ b/drivers/mmc/host/dw_mmc-rockchip.c
> > > > @@ -15,7 +15,9 @@
> > > >  #include "dw_mmc.h"
> > > >  #include "dw_mmc-pltfm.h"
> > > >
> > > > -#define RK3288_CLKGEN_DIV       2
> > > > +#define RK3288_CLKGEN_DIV      2
> > > > +#define RK3288_MIN_INIT_FREQ   375000
> > > > +#define MMC_MAX_INIT_FREQ      400000
> > > >
> > > >  struct dw_mci_rockchip_priv_data {
> > > >         struct clk              *drv_clk;
> > > > @@ -27,6 +29,7 @@ struct dw_mci_rockchip_priv_data {
> > > >  static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios)
> > > >  {
> > > >         struct dw_mci_rockchip_priv_data *priv = host->priv;
> > > > +       struct mmc_host *mmc = mmc_from_priv(host);
> > > >         int ret;
> > > >         unsigned int cclkin;
> > > >         u32 bus_hz;
> > > > @@ -34,6 +37,10 @@ static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios)
> > > >         if (ios->clock == 0)
> > > >                 return;
> > > >
> > > > +       /* the clock will fail if below the f_min rate */
> > > > +       if (ios->clock < mmc->f_min)
> > > > +               ios->clock = mmc->f_min;
> > > > +
> > >
> > > You shouldn't need this. The mmc core should manage this already.
> >
> > I thought so too, but while setting f_min did reduce the number of
> > errors, it didn't stop them completely.
> > Each tick I was getting three failures, it turns out mmc core tries
> > anyways with 300000, 200000, and 100000.
> > Clamping it here was necessary to stop these.
>
> Ohh, that was certainly a surprise to me. Unless the dw_mmc driver
> invokes this path on it's own in some odd way, that means the mmc core
> has a bug that we need to fix.
>
> Would you mind taking a stack trace or debug this so we understand in
> what case the mmc core doesn't respect f_min? It really should.

I thought it was odd too, will check into where it's happening.
Thanks!

>
> [...]
>
> Kind regards
> Uffe