[PATCH v4 1/5] dt-bindings: Convert ahci-platform DT bindings to yaml

Rob Herring robh at kernel.org
Wed Mar 2 10:14:31 PST 2022 

On Tue, Mar 01, 2022 at 04:24:17PM +0100, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w at public-files.de>
> 
> Create a yaml file for dtbs_check from the old txt binding.
> 
> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> ---
> v4:
>   - fix min vs. max
>   - fix indention of examples
>   - move up sata-common.yaml
>   - reorder compatible
>   - add descriptions/maxitems
>   - fix compatible-structure
>   - fix typo in example achi vs. ahci
>   - add clock-names and reg-names
>   - fix ns2 errors in separate patch
> v3:
>   - add conversion to sata-series
>   - fix some errors in dt_binding_check and dtbs_check
>   - move to unevaluated properties = false
> 
> ---
> 
> imho all errors should be fixed in the dts not in the yaml...
> 
> errors about the subitem requirement that was defined in txt but not fixed some marvell dts
> 
> some dts for Marvell SoC bring error
> 'phys' is a required property
> 'target-supply' is a required property
> 
> problem is in arch/arm64/boot/dts/marvell/armada-cp11x.dtsi:331
> here the sata-port at 0 is defined, but not overridden with phy/target-supply in any following dts
> ---
>  .../devicetree/bindings/ata/ahci-platform.txt |  79 ---------
>  .../bindings/ata/ahci-platform.yaml           | 162 ++++++++++++++++++
>  2 files changed, 162 insertions(+), 79 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/ata/ahci-platform.txt
>  create mode 100644 Documentation/devicetree/bindings/ata/ahci-platform.yaml
> 
> diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> deleted file mode 100644
> index 77091a277642..000000000000
> --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
> +++ /dev/null
> @@ -1,79 +0,0 @@
> -* AHCI SATA Controller
> -
> -SATA nodes are defined to describe on-chip Serial ATA controllers.
> -Each SATA controller should have its own node.
> -
> -It is possible, but not required, to represent each port as a sub-node.
> -It allows to enable each port independently when dealing with multiple
> -PHYs.
> -
> -Required properties:
> -- compatible        : compatible string, one of:
> -  - "brcm,iproc-ahci"
> -  - "hisilicon,hisi-ahci"
> -  - "cavium,octeon-7130-ahci"
> -  - "ibm,476gtr-ahci"
> -  - "marvell,armada-380-ahci"
> -  - "marvell,armada-3700-ahci"
> -  - "snps,dwc-ahci"
> -  - "snps,spear-ahci"
> -  - "generic-ahci"
> -- interrupts        : <interrupt mapping for SATA IRQ>
> -- reg               : <registers mapping>
> -
> -Please note that when using "generic-ahci" you must also specify a SoC specific
> -compatible:
> -	compatible = "manufacturer,soc-model-ahci", "generic-ahci";
> -
> -Optional properties:
> -- dma-coherent      : Present if dma operations are coherent
> -- clocks            : a list of phandle + clock specifier pairs
> -- resets            : a list of phandle + reset specifier pairs
> -- target-supply     : regulator for SATA target power
> -- phy-supply        : regulator for PHY power
> -- phys              : reference to the SATA PHY node
> -- phy-names         : must be "sata-phy"
> -- ahci-supply       : regulator for AHCI controller
> -- ports-implemented : Mask that indicates which ports that the HBA supports
> -		      are available for software to use. Useful if PORTS_IMPL
> -		      is not programmed by the BIOS, which is true with
> -		      some embedded SOC's.
> -
> -Required properties when using sub-nodes:
> -- #address-cells    : number of cells to encode an address
> -- #size-cells       : number of cells representing the size of an address
> -
> -Sub-nodes required properties:
> -- reg		    : the port number
> -And at least one of the following properties:
> -- phys		    : reference to the SATA PHY node
> -- target-supply     : regulator for SATA target power
> -
> -Examples:
> -        sata at ffe08000 {
> -		compatible = "snps,spear-ahci";
> -		reg = <0xffe08000 0x1000>;
> -		interrupts = <115>;
> -        };
> -
> -With sub-nodes:
> -	sata at f7e90000 {
> -		compatible = "marvell,berlin2q-achi", "generic-ahci";
> -		reg = <0xe90000 0x1000>;
> -		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> -		clocks = <&chip CLKID_SATA>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		sata0: sata-port at 0 {
> -			reg = <0>;
> -			phys = <&sata_phy 0>;
> -			target-supply = <&reg_sata0>;
> -		};
> -
> -		sata1: sata-port at 1 {
> -			reg = <1>;
> -			phys = <&sata_phy 1>;
> -			target-supply = <&reg_sata1>;;
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
> new file mode 100644
> index 000000000000..cf67ddfc6afb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
> @@ -0,0 +1,162 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/ata/ahci-platform.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AHCI SATA Controller

blank line.

> +description:
> +  SATA nodes are defined to describe on-chip Serial ATA controllers.
> +  Each SATA controller should have its own node.
> +
> +  It is possible, but not required, to represent each port as a sub-node.
> +  It allows to enable each port independently when dealing with multiple
> +  PHYs.

You need a '|' after 'description' if you want to maintain the 
paragraphs.

> +
> +maintainers:
> +  - Hans de Goede <hdegoede at redhat.com>
> +  - Jens Axboe <axboe at kernel.dk>
> +
> +allOf:
> +- $ref: "sata-common.yaml#"
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +        - enum:
> +          - brcm,iproc-ahci
> +          - marvell,armada-8k-ahci
> +          - marvell,berlin2q-ahci
> +        - const: generic-ahci
> +      - enum:
> +        - brcm,iproc-ahci
> +        - cavium,octeon-7130-ahci
> +        - hisilicon,hisi-ahci
> +        - ibm,476gtr-ahci
> +        - marvell,armada-3700-ahci
> +        - marvell,armada-380-ahci
> +        - snps,dwc-ahci
> +        - snps,spear-ahci

Install yamllint and run 'make dt_binding_check'. It's going to 
complain about the indentation.

> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    description:
> +      Clock IDs array as required by the controller.
> +    minItems: 1
> +    maxItems: 3
> +
> +  interrupts:
> +    description:
> +      specifies the interrupt number for the controller.
> +    maxItems: 1
> +
> +  ahci-supply:
> +    description:
> +      regulator for AHCI controller
> +
> +  clock-names:

Group with 'clocks'

> +    description:
> +      Names of clocks corresponding to IDs in the clock property.
> +    minItems: 1
> +    maxItems: 3
> +
> +  dma-coherent:
> +    true
> +
> +  phy-supply:
> +    description:
> +      regulator for PHY power
> +
> +  phys:
> +    description:
> +      List of all PHYs on this controller
> +    maxItems: 1
> +
> +  phy-names:
> +    description:
> +      Name specifier for the PHYs
> +    maxItems: 1
> +
> +  ports-implemented:
> +    $ref: '/schemas/types.yaml#/definitions/uint32'
> +    description:
> +      Mask that indicates which ports that the HBA supports
> +      are available for software to use. Useful if PORTS_IMPL
> +      is not programmed by the BIOS, which is true with
> +      some embedded SoCs.
> +    maxItems: 1

A uint32 is only ever 1 item. Drop.

IIRC, isn't the max here 0xff? Add constraints.

> +
> +  reg-names:
> +    maxItems: 1

Group with 'reg'.

> +
> +  resets:
> +    maxItems: 1
> +
> +  target-supply:
> +    description:
> +      regulator for SATA target power
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +patternProperties:
> +  "^sata-port@[0-9a-f]+$":
> +    type: object

       additionalProperties: false

> +    description:
> +      Subnode with configuration of the Ports.
> +
> +    properties:
> +      reg:
> +        maxItems: 1
> +
> +      phys:
> +        minItems: 1
> +
> +      target-supply:
> +        description:
> +          regulator for SATA target power
> +
> +    required:
> +      - reg
> +
> +    anyOf:
> +      - required: [ phys ]
> +      - required: [ target-supply ]
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    sata at ffe08000 {
> +           compatible = "snps,spear-ahci";
> +           reg = <0xffe08000 0x1000>;
> +           interrupts = <115>;
> +    };
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/berlin2q.h>
> +    sata at f7e90000 {
> +            compatible = "marvell,berlin2q-ahci", "generic-ahci";
> +            reg = <0xe90000 0x1000>;
> +            interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +            clocks = <&chip CLKID_SATA>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            sata0: sata-port at 0 {
> +                    reg = <0>;
> +                    phys = <&sata_phy 0>;
> +                    target-supply = <&reg_sata0>;
> +            };
> +
> +            sata1: sata-port at 1 {
> +                    reg = <1>;
> +                    phys = <&sata_phy 1>;
> +                    target-supply = <&reg_sata1>;
> +            };
> +    };
> -- 
> 2.25.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

More information about the Linux-rockchip mailing list