[PATCH] arm64: dts: rockchip: Enable video output on Station M2

[Furkan Kardame]

Add the device tree nodes to enable video output on the Station M2.
Enable the GPU and HDMI nodes and fix the GPU regulator range.

Signed-off-by: Furkan Kardame <f.kardame at manjaro.org>
---
 .../arm64/boot/dts/rockchip/rk3566-roc-pc.dts | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index 57759b66d..dba648c2f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3566.dtsi"
 
 / {
@@ -27,6 +28,17 @@ gmac1_clkin: external-gmac1-clock {
 		#clock-cells = <0>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -149,6 +161,29 @@ &gmac1m0_clkinout
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -577,3 +612,20 @@ &usb_host0_ehci {
 &usb_host0_ohci {
 	status = "okay";
 };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.36.1