[PATCH 1/3] net: ethernet: stmmac: dwmac-rk: Disable delayline if it is invalid

Sebastian Reichel sebastian.reichel at collabora.com
Fri Jun 24 13:15:37 PDT 2022


Hi,

On Fri, Jun 24, 2022 at 07:37:08PM +0200, Andrew Lunn wrote:
> > The Rockchip hardware supports enabling/disabling delays and
> > configuring a delay value of 0x00-0x7f. For the RK3588 evaluation
> > board the RX delay should be disabled.
> 
> So you can just put 0 in DT then.

My understanding is, that there is a difference between
enabled delay with a delay value of 0 and delay fully
disabled. But I could not find any details aboout this
in the datasheet unfortunately.

-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20220624/ac2b9856/attachment.sig>


More information about the Linux-rockchip mailing list