[PATCH 1/6] media: v4l2: Add NV15 pixel format
Nicolas Dufresne
nicolas.dufresne at collabora.com
Thu Jul 14 06:02:38 PDT 2022
Le mercredi 13 juillet 2022 à 21:28 +0300, Laurent Pinchart a écrit :
> Hi Sebastian and Jonas,
>
> Thank you for the patch.
>
> On Wed, Jul 13, 2022 at 06:24:46PM +0200, Sebastian Fricke wrote:
> > From: Jonas Karlman <jonas at kwiboo.se>
> >
> > Add the NV15 pixel format used by the Rockchip Video Decoder for 10-bit
> > buffers.
> >
> > NV15 is a packed 10-bit 4:2:0 Y/CbCr format similar to P010 and P210 but
> > has no padding between components. Instead, luminance and chrominance
> > samples are grouped into 4s so that each group is packed into an integer
> > number of bytes:
> >
> > YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
> >
> > The '15' suffix refers to the optimum effective bits per pixel which is
> > achieved when the total number of luminance samples is a multiple of 8
> > for NV15.
> >
> > Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> > Signed-off-by: Sebastian Fricke <sebastian.fricke at collabora.com>
> > ---
> > .../media/v4l/pixfmt-yuv-planar.rst | 53 +++++++++++++++++++
> > drivers/media/v4l2-core/v4l2-common.c | 2 +
> > drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
> > include/uapi/linux/videodev2.h | 1 +
> > 4 files changed, 57 insertions(+)
> >
> > diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> > index a900ff66911a..42ab3fe4667f 100644
> > --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> > +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> > @@ -79,6 +79,13 @@ All components are stored with the same number of bits per component.
> > - Cr, Cb
> > - Yes
> > - Linear
> > + * - V4L2_PIX_FMT_NV15
> > + - 'NV15'
> > + - 15
> > + - 4:2:0
> > + - Cb, Cr
> > + - Yes
> > + - Linear
> > * - V4L2_PIX_FMT_NV12M
> > - 'NM12'
> > - 8
> > @@ -176,6 +183,7 @@ horizontally.
> >
> > .. _V4L2-PIX-FMT-NV12:
> > .. _V4L2-PIX-FMT-NV21:
> > +.. _V4L2-PIX-FMT-NV15:
> > .. _V4L2-PIX-FMT-NV12M:
> > .. _V4L2-PIX-FMT-NV21M:
> > .. _V4L2-PIX-FMT-P010:
> > @@ -570,6 +578,51 @@ Data in the 10 high bits, zeros in the 6 low bits, arranged in little endian ord
> > - Cb\ :sub:`11`
> > - Cr\ :sub:`11`
> >
> > +.. _V4L2_PIX_FMT_NV15:
> > +
> > +NV15
> > +----
> > +
> > +Like P010 but a packed 10-bit 4:2:0 semi-planar Y/CbCr format without padding between components.
>
> "packed 10-bit semi-planar" sounds confusing, as "packed YUV" usually
> refers to YUYV-style formats, but I'm not sure how to express that
> better.
Perhaps:
"Similar to P010 (10-bit 4:":0 semi-planer Y/CbCr), though unlike P010, the
there is not padding between components."
>
> > +Instead, luminance and chrominance samples are grouped into 4s so that each group is packed into an integer
> > +number of bytes:
>
> Could you please wrap the description at 80 columns ?
>
> > +YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
> > +
> > +.. flat-table:: Sample 4x4 NV15 Image
> > + :header-rows: 0
> > + :stub-columns: 0
> > +
> > + * - start + 0:
> > + - Y'\ :sub:`00`
> > + - Y'\ :sub:`01`
> > + - Y'\ :sub:`02`
> > + - Y'\ :sub:`03`
> > + * - start + 8:
> > + - Y'\ :sub:`10`
> > + - Y'\ :sub:`11`
> > + - Y'\ :sub:`12`
> > + - Y'\ :sub:`13`
> > + * - start + 16:
> > + - Y'\ :sub:`20`
> > + - Y'\ :sub:`21`
> > + - Y'\ :sub:`22`
> > + - Y'\ :sub:`23`
> > + * - start + 24:
> > + - Y'\ :sub:`30`
> > + - Y'\ :sub:`31`
> > + - Y'\ :sub:`32`
> > + - Y'\ :sub:`33`
> > + * - start + 32:
> > + - Cb\ :sub:`00`
> > + - Cr\ :sub:`00`
> > + - Cb\ :sub:`01`
> > + - Cr\ :sub:`01`
> > + * - start + 40:
> > + - Cb\ :sub:`10`
> > + - Cr\ :sub:`10`
> > + - Cb\ :sub:`11`
> > + - Cr\ :sub:`11`
>
> This doesn't look right. You need to describe the data at the bit level,
> so show how the 10-bit samples are packed into bytes.
A word of NV15 is 40 bits, so 1 word of NV12 is 5 bytes, 4 pixels. I believe
there is no choice here but to describe 4 pixels for Y plane, and 4 pixels for
CbCr plane. This might be a bit big though.
>
> > +
> > .. raw:: latex
> >
> > \endgroup
> > diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
> > index 1e38ad8906a2..23a0cb02ea3a 100644
> > --- a/drivers/media/v4l2-core/v4l2-common.c
> > +++ b/drivers/media/v4l2-core/v4l2-common.c
> > @@ -262,6 +262,8 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
> > /* YUV planar formats */
> > { .format = V4L2_PIX_FMT_NV12, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > { .format = V4L2_PIX_FMT_NV21, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > + { .format = V4L2_PIX_FMT_NV15, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 5, 0, 0 }, .hdiv = 2, .vdiv = 2,
> > + .block_w = { 4, 2, 0, 0 }, .block_h = { 1, 1, 0, 0 } },
> > { .format = V4L2_PIX_FMT_NV16, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > { .format = V4L2_PIX_FMT_NV61, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> > { .format = V4L2_PIX_FMT_NV24, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
> > index e2526701294e..9e5510cb255e 100644
> > --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> > +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> > @@ -1302,6 +1302,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
> > case V4L2_PIX_FMT_M420: descr = "YUV 4:2:0 (M420)"; break;
> > case V4L2_PIX_FMT_NV12: descr = "Y/CbCr 4:2:0"; break;
> > case V4L2_PIX_FMT_NV21: descr = "Y/CrCb 4:2:0"; break;
> > + case V4L2_PIX_FMT_NV15: descr = "10-bit Y/CbCr 4:2:0 (Packed)"; break;
> > case V4L2_PIX_FMT_NV16: descr = "Y/CbCr 4:2:2"; break;
> > case V4L2_PIX_FMT_NV61: descr = "Y/CrCb 4:2:2"; break;
> > case V4L2_PIX_FMT_NV24: descr = "Y/CbCr 4:4:4"; break;
> > diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
> > index 5a73b92ffe4d..47ff34d6b79f 100644
> > --- a/include/uapi/linux/videodev2.h
> > +++ b/include/uapi/linux/videodev2.h
> > @@ -598,6 +598,7 @@ struct v4l2_pix_format {
> > /* two planes -- one Y, one Cr + Cb interleaved */
> > #define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */
> > #define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */
> > +#define V4L2_PIX_FMT_NV15 v4l2_fourcc('N', 'V', '1', '5') /* 15 Y/CbCr 4:2:0 10-bit packed */
> > #define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */
> > #define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */
> > #define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */
>
More information about the Linux-rockchip
mailing list