[PATCH v2 32/55] media: rkisp1: isp: Move input configuration to rkisp1_config_isp()

paul.elder at ideasonboard.com paul.elder at ideasonboard.com
Thu Jul 7 07:12:40 PDT 2022


Hi Laurent,

On Fri, Jul 01, 2022 at 02:06:50AM +0300, Laurent Pinchart wrote:
> The ISP_ACQ_PROP register is set twice, once in rkisp1_config_isp() for
> most of its fields, and once in rkisp1_config_dvp() (called from
> rkisp1_config_path()) to configure the input selection field. Move the
> latter to rkisp1_config_isp() to write the register once only, and drop
> the now empty rkisp1_config_dvp() function.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

Reviewed-by: Paul Elder <paul.elder at ideasonboard.com>

> ---
> Changes since v1:
> 
> - Print the value of unsupported bus width
> - Remove unneeded curly braces
> ---
>  .../platform/rockchip/rkisp1/rkisp1-isp.c     | 66 +++++++------------
>  1 file changed, 24 insertions(+), 42 deletions(-)
> 
> diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> index 9b32ae585de8..85c1995bb5c2 100644
> --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> @@ -141,7 +141,7 @@ static int rkisp1_config_isp(struct rkisp1_isp *isp,
>  			     enum v4l2_mbus_type mbus_type, u32 mbus_flags)
>  {
>  	struct rkisp1_device *rkisp1 = isp->rkisp1;
> -	u32 isp_ctrl = 0, irq_mask = 0, acq_mult = 0, signal = 0;
> +	u32 isp_ctrl = 0, irq_mask = 0, acq_mult = 0, signal = 0, input_sel = 0;
>  	const struct rkisp1_mbus_info *src_fmt, *sink_fmt;
>  	struct v4l2_mbus_framefmt *sink_frm;
>  	struct v4l2_rect *sink_crop;
> @@ -189,6 +189,22 @@ static int rkisp1_config_isp(struct rkisp1_isp *isp,
>  	if (mbus_type == V4L2_MBUS_BT656 || mbus_type == V4L2_MBUS_PARALLEL) {
>  		if (mbus_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
>  			signal = RKISP1_CIF_ISP_ACQ_PROP_POS_EDGE;
> +
> +		switch (sink_fmt->bus_width) {
> +		case 8:
> +			input_sel = RKISP1_CIF_ISP_ACQ_PROP_IN_SEL_8B_ZERO;
> +			break;
> +		case 10:
> +			input_sel = RKISP1_CIF_ISP_ACQ_PROP_IN_SEL_10B_ZERO;
> +			break;
> +		case 12:
> +			input_sel = RKISP1_CIF_ISP_ACQ_PROP_IN_SEL_12B;
> +			break;
> +		default:
> +			dev_err(rkisp1->dev, "Invalid bus width %u\n",
> +				sink_fmt->bus_width);
> +			return -EINVAL;
> +		}
>  	}
>  
>  	if (mbus_type == V4L2_MBUS_PARALLEL) {
> @@ -201,7 +217,7 @@ static int rkisp1_config_isp(struct rkisp1_isp *isp,
>  
>  	rkisp1_write(rkisp1, RKISP1_CIF_ISP_CTRL, isp_ctrl);
>  	rkisp1_write(rkisp1, RKISP1_CIF_ISP_ACQ_PROP,
> -		     signal | sink_fmt->yuv_seq |
> +		     signal | sink_fmt->yuv_seq | input_sel |
>  		     RKISP1_CIF_ISP_ACQ_PROP_BAYER_PAT(sink_fmt->bayer_pat) |
>  		     RKISP1_CIF_ISP_ACQ_PROP_FIELD_SEL_ALL);
>  	rkisp1_write(rkisp1, RKISP1_CIF_ISP_ACQ_NR_FRAMES, 0);
> @@ -238,52 +254,19 @@ static int rkisp1_config_isp(struct rkisp1_isp *isp,
>  	return 0;
>  }
>  
> -static int rkisp1_config_dvp(struct rkisp1_isp *isp)
> -{
> -	struct rkisp1_device *rkisp1 = isp->rkisp1;
> -	const struct rkisp1_mbus_info *sink_fmt = isp->sink_fmt;
> -	u32 val, input_sel;
> -
> -	switch (sink_fmt->bus_width) {
> -	case 8:
> -		input_sel = RKISP1_CIF_ISP_ACQ_PROP_IN_SEL_8B_ZERO;
> -		break;
> -	case 10:
> -		input_sel = RKISP1_CIF_ISP_ACQ_PROP_IN_SEL_10B_ZERO;
> -		break;
> -	case 12:
> -		input_sel = RKISP1_CIF_ISP_ACQ_PROP_IN_SEL_12B;
> -		break;
> -	default:
> -		dev_err(rkisp1->dev, "Invalid bus width\n");
> -		return -EINVAL;
> -	}
> -
> -	val = rkisp1_read(rkisp1, RKISP1_CIF_ISP_ACQ_PROP);
> -	rkisp1_write(rkisp1, RKISP1_CIF_ISP_ACQ_PROP, val | input_sel);
> -
> -	return 0;
> -}
> -
>  /* Configure MUX */
> -static int rkisp1_config_path(struct rkisp1_isp *isp,
> -			      enum v4l2_mbus_type mbus_type)
> +static void rkisp1_config_path(struct rkisp1_isp *isp,
> +			       enum v4l2_mbus_type mbus_type)
>  {
>  	struct rkisp1_device *rkisp1 = isp->rkisp1;
>  	u32 dpcl = rkisp1_read(rkisp1, RKISP1_CIF_VI_DPCL);
> -	int ret = 0;
>  
> -	if (mbus_type == V4L2_MBUS_BT656 ||
> -	    mbus_type == V4L2_MBUS_PARALLEL) {
> -		ret = rkisp1_config_dvp(isp);
> +	if (mbus_type == V4L2_MBUS_BT656 || mbus_type == V4L2_MBUS_PARALLEL)
>  		dpcl |= RKISP1_CIF_VI_DPCL_IF_SEL_PARALLEL;
> -	} else if (mbus_type == V4L2_MBUS_CSI2_DPHY) {
> +	else if (mbus_type == V4L2_MBUS_CSI2_DPHY)
>  		dpcl |= RKISP1_CIF_VI_DPCL_IF_SEL_MIPI;
> -	}
>  
>  	rkisp1_write(rkisp1, RKISP1_CIF_VI_DPCL, dpcl);
> -
> -	return ret;
>  }
>  
>  /* Hardware configure Entry */
> @@ -295,9 +278,8 @@ static int rkisp1_config_cif(struct rkisp1_isp *isp,
>  	ret = rkisp1_config_isp(isp, mbus_type, mbus_flags);
>  	if (ret)
>  		return ret;
> -	ret = rkisp1_config_path(isp, mbus_type);
> -	if (ret)
> -		return ret;
> +
> +	rkisp1_config_path(isp, mbus_type);
>  	rkisp1_config_ism(isp);
>  
>  	return 0;



More information about the Linux-rockchip mailing list