[PATCH 2/3] arm64: dts: rockchip: rk356x: Add pdm node

[Michael Riesch]

Hello Samuel,

On 1/30/22 06:38, Samuel Holland wrote:
> rk356x contains a PDM microphone controller which is compatible with the
> existing rockchip,pdm binding. Add its node.
> 
> Signed-off-by: Samuel Holland <samuel at sholland.org>
> ---
> 
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> index a68033a23975..f2f3cdeab0aa 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -651,6 +651,27 @@ &i2s1m0_sdo0   &i2s1m0_sdo1
>  		status = "disabled";
>  	};
>  
> +	pdm: pdm at fe440000 {
> +		compatible = "rockchip,rk3568-pdm";
> +		reg = <0x0 0xfe440000 0x0 0x1000>;
> +		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru MCLK_PDM>, <&cru HCLK_PDM>;
> +		clock-names = "pdm_clk", "pdm_hclk";
> +		dmas = <&dmac1 9>;
> +		dma-names = "rx";
> +		resets = <&cru SRST_M_PDM>;
> +		reset-names = "pdm-m";
> +		pinctrl-0 = <&pdmm0_clk
> +			     &pdmm0_clk1
> +			     &pdmm0_sdi0
> +			     &pdmm0_sdi1
> +			     &pdmm0_sdi2
> +			     &pdmm0_sdi3>;
> +		pinctrl-names = "default";

I think the pinctrl properties should go before the reset properties.

Apart from that this patch looks good to me.

Best regards,
Michael

> +		#sound-dai-cells = <0>;
> +		status = "disabled";
> +	};
> +
>  	dmac0: dmac at fe530000 {
>  		compatible = "arm,pl330", "arm,primecell";
>  		reg = <0x0 0xfe530000 0x0 0x4000>;