[PATCH V4 07/11] arm64: dts: imx8mq: Enable both G1 and G2 VPU's with vpu-blk-ctrl

Lucas Stach l.stach at pengutronix.de
Tue Jan 25 10:20:57 PST 2022


Am Dienstag, dem 25.01.2022 um 11:11 -0600 schrieb Adam Ford:
> With the Hantro G1 and G2 now setup to run independently, update
> the device tree to allow both to operate.  This requires the
> vpu-blk-ctrl node to be configured.  Since vpu-blk-ctrl needs
> certain clock enabled to handle the gating of the G1 and G2
> fuses, the clock-parents and clock-rates for the various VPU's
> to be moved into the pgc_vpu because they cannot get re-parented
> once enabled, and the pgc_vpu is the highest in the chain.
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> Reported-by: kernel test robot <lkp at intel.com>
> Reviewed-by: Ezequiel Garcia <ezequiel at vanguardiasur.com.ar>

Reviewed-by: Lucas Stach <l.stach at pengutronix.de>

> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 2df2510d0118..549b2440f55d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -737,7 +737,21 @@ pgc_gpu: power-domain at 5 {
>  					pgc_vpu: power-domain at 6 {
>  						#power-domain-cells = <0>;
>  						reg = <IMX8M_POWER_DOMAIN_VPU>;
> -						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
> +						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>,
> +							 <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
> +							 <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
> +						assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
> +								  <&clk IMX8MQ_CLK_VPU_G2>,
> +								  <&clk IMX8MQ_CLK_VPU_BUS>,
> +								  <&clk IMX8MQ_VPU_PLL_BYPASS>;
> +						assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
> +									 <&clk IMX8MQ_VPU_PLL_OUT>,
> +									 <&clk IMX8MQ_SYS1_PLL_800M>,
> +									 <&clk IMX8MQ_VPU_PLL>;
> +						assigned-clock-rates = <600000000>,
> +								       <600000000>,
> +								       <800000000>,
> +								       <0>;
>  					};
>  
>  					pgc_disp: power-domain at 7 {
> @@ -1457,30 +1471,31 @@ usb3_phy1: usb-phy at 382f0040 {
>  			status = "disabled";
>  		};
>  
> -		vpu: video-codec at 38300000 {
> -			compatible = "nxp,imx8mq-vpu";
> -			reg = <0x38300000 0x10000>,
> -			      <0x38310000 0x10000>,
> -			      <0x38320000 0x10000>;
> -			reg-names = "g1", "g2", "ctrl";
> -			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> -				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> -			interrupt-names = "g1", "g2";
> +		vpu_g1: video-codec at 38300000 {
> +			compatible = "nxp,imx8mq-vpu-g1";
> +			reg = <0x38300000 0x10000>;
> +			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
> +			power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
> +		};
> +
> +		vpu_g2: video-codec at 38310000 {
> +			compatible = "nxp,imx8mq-vpu-g2";
> +			reg = <0x38310000 0x10000>;
> +			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
> +			power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
> +		};
> +
> +		vpu_blk_ctrl: blk-ctrl at 38320000 {
> +			compatible = "fsl,imx8mq-vpu-blk-ctrl";
> +			reg = <0x38320000 0x100>;
> +			power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
> +			power-domain-names = "bus", "g1", "g2";
>  			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
> -				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
> -				 <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
> -			clock-names = "g1", "g2", "bus";
> -			assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
> -					  <&clk IMX8MQ_CLK_VPU_G2>,
> -					  <&clk IMX8MQ_CLK_VPU_BUS>,
> -					  <&clk IMX8MQ_VPU_PLL_BYPASS>;
> -			assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
> -						 <&clk IMX8MQ_VPU_PLL_OUT>,
> -						 <&clk IMX8MQ_SYS1_PLL_800M>,
> -						 <&clk IMX8MQ_VPU_PLL>;
> -			assigned-clock-rates = <600000000>, <600000000>,
> -					       <800000000>, <0>;
> -			power-domains = <&pgc_vpu>;
> +				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
> +			clock-names = "g1", "g2";
> +			#power-domain-cells = <1>;
>  		};
>  
>  		pcie0: pcie at 33800000 {





More information about the Linux-rockchip mailing list