[PATCH v3 6/7] arm64: dts: rockchip: enable dwc3 on quartz64-a

Peter Geis pgwipeout at gmail.com
Sun Feb 27 07:30:15 PST 2022


The quartz64 model a has support for both the dwc3 otg port and the dwc3
host port. Add the otg power supply and dwc3 nodes to the device tree to
enable support for these.

Signed-off-by: Peter Geis <pgwipeout at gmail.com>
---
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index dd7f4b9b686b..141a433429b5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -151,6 +151,16 @@ vcc5v0_usb20_host: vcc5v0_usb20_host {
 		vin-supply = <&vcc5v0_usb>;
 	};
 
+	vcc5v0_usb20_otg: vcc5v0_usb20_otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5v0_usb20_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dcdc_boost>;
+	};
+
 	vcc3v3_sd: vcc3v3_sd {
 		compatible = "regulator-fixed";
 		enable-active-low;
@@ -187,6 +197,10 @@ vcc_wl: vcc_wl {
 	};
 };
 
+&combphy1 {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&vdd_cpu>;
 };
@@ -672,6 +686,29 @@ &usb_host1_ohci {
 	status = "okay";
 };
 
+&usb_host0_xhci {
+	status = "okay";
+};
+
+/* usb3 controller is muxed with sata1 */
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb20_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb20_otg>;
+	status = "okay";
+};
+
 &usb2phy1 {
 	status = "okay";
 };
-- 
2.25.1




More information about the Linux-rockchip mailing list