[PATCH 1/2] arm64: dts: rockchip: add the usb3 nodes to rk356x

Johan Jonker jbx6244 at gmail.com
Fri Feb 25 03:04:04 PST 2022


Oops...

On 2/25/22 11:53, Johan Jonker wrote:
> Hi Michael,
> 
> On 2/25/22 11:09, Michael Riesch wrote:
>> The Rockchip RK3566 and RK3568 feature two USB 3.0 xHCI controllers,
>> one of them with Dual Role Device (DRD) capability.
>>
>> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
>> Signed-off-by: Michael Riesch <michael.riesch at wolfvision.net>
>> ---
>>  arch/arm64/boot/dts/rockchip/rk3568.dtsi |  5 ++
>>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 58 ++++++++++++++++++++++++
>>  2 files changed, 63 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
>> index 91a0b798b857..0cd4ef36066a 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
>> @@ -116,3 +116,8 @@ power-domain at RK3568_PD_PIPE {
>>  		#power-domain-cells = <0>;
>>  	};
>>  };
>> +
>> +&usb_host0_dwc3 {
>> +	phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>;
>> +	phy-names = "usb2-phy", "usb3-phy";
>> +};
>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> index 8b9fae3d348a..b46794486037 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> @@ -230,6 +230,64 @@ scmi_shmem: sram at 0 {
>>  		};
>>  	};
>>  
>> +	usb_host0_xhci: usb at fcc00000 {
> 
>> +		compatible = "rockchip,rk3399-dwc3";
> 
> Add string to rockchip,dwc3.yaml
> and check with dtsb_check
> 

> compatible = "rockchip,rk3399-dwc3", "snps,dwc3";

compatible = "rockchip,rk3568-dwc3", "snps,dwc3";

> 
>> +		#address-cells = <2>;
> 
> remove
> 
>> +		clocks = <&cru CLK_USB3OTG0_REF>, <&cru CLK_USB3OTG0_SUSPEND>,
> 
>> +			 <&cru ACLK_USB3OTG0>, <&cru PCLK_PIPE>;
> 
> PCLK_PIPE part of an other node, probably only to enable PD_PIPE.
> 
> 	combphy1: phy at fe830000 {
> 		compatible = "rockchip,rk3568-naneng-combphy";
> 		reg = <0x0 0xfe830000 0x0 0x100>;
> 		clocks = <&pmucru CLK_PCIEPHY1_REF>,
> 			 <&cru PCLK_PIPEPHY1>,
> 			 <&cru PCLK_PIPE>;
> 		clock-names = "ref", "apb", "pipe";
> 		assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
> 		assigned-clock-rates = <100000000>;
> 		resets = <&cru SRST_PIPEPHY1>;
> 		rockchip,pipe-grf = <&pipegrf>;
> 		rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
> 		#phy-cells = <1>;
> 		status = "disabled";
> 	};
> 
> Rockchip RK3568 TRM Part1 V1.0-20210111.pdf
> page 475
> 
> PD_PIPE:
> 
> BIU_PIPE
> USB3OTG
> PCIE20
> PCIE30
> SATA
> XPCS
> 
> PCIE, SATA USB clocks are child of aclk_pipe
> Yet PCLK_PIPE is the only clock that enables RK3568_PD_PIPE.
> 
> 
> 	COMPOSITE_NOMUX(PCLK_PIPE, "pclk_pipe", "aclk_pipe", 0,
> 			RK3568_CLKSEL_CON(29), 4, 4, DFLAGS,
> 			RK3568_CLKGATE_CON(10), 1, GFLAGS),
> 
> &power {
> 	power-domain at RK3568_PD_PIPE {
> 		reg = <RK3568_PD_PIPE>;
> 
> 		clocks = <&cru PCLK_PIPE>;
> 
> Do we need more clocks here for USB for example?
> 
> 		pm_qos = <&qos_pcie2x1>,
> 			 <&qos_pcie3x1>,
> 			 <&qos_pcie3x2>,
> 			 <&qos_sata0>,
> 			 <&qos_sata1>,
> 			 <&qos_sata2>,
> 			 <&qos_usb3_0>,
> 			 <&qos_usb3_1>;
> 		#power-domain-cells = <0>;
> 	};
> };
> 
>> +		clock-names = "ref_clk", "suspend_clk", "bus_clk", "grf_clk";
> 
> grf_clk only related to rk3399 ACLK_USB3_GRF and not to PCLK_PIPE.
> 
>> +		ranges;
>> +		#size-cells = <2>;
> 
> remove
> 
>> +		status = "disabled";
>> +
>> +		usb_host0_dwc3: usb at fcc00000 {
> 
> No subnode for "snps,dwc3"
> No more subdriver like rk3399.
> Use dwc core only and fix things/quirks there.
> 
>> +			compatible = "snps,dwc3";
>> +			reg = <0x0 0xfcc00000 0x0 0x400000>;
>> +			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
>> +			dr_mode = "otg";
>> +			phy_type = "utmi_wide";
>> +			power-domains = <&power RK3568_PD_PIPE>;
>> +			resets = <&cru SRST_USB3OTG0>;
>> +			reset-names = "usb3-otg";
>> +			snps,dis-del-phy-power-chg-quirk;
>> +			snps,dis_enblslpm_quirk;
>> +			snps,dis_rxdet_inp3_quirk;
>> +			snps,dis-tx-ipgap-linecheck-quirk;
>> +			snps,dis-u2-freeclk-exists-quirk;
> 
>> +			snps,xhci-trb-ent-quirk;
> 
> Not in mainline.
> See snps,dwc3.yaml
> 
>> +		};
>> +	};
>> +
>> +	usb_host1_xhci: usb at fd000000 {

>> +		compatible = "rockchip,rk3399-dwc3";

compatible = "rockchip,rk3568-dwc3", "snps,dwc3";

>> +		#address-cells = <2>;
>> +		clocks = <&cru CLK_USB3OTG1_REF>, <&cru CLK_USB3OTG1_SUSPEND>,
>> +			 <&cru ACLK_USB3OTG1>, <&cru PCLK_PIPE>;
>> +		clock-names = "ref_clk", "suspend_clk", "bus_clk", "grf_clk";
>> +		ranges;
>> +		#size-cells = <2>;
>> +		status = "disabled";
>> +
>> +		usb_host1_dwc3: usb at fd000000 {
>> +			compatible = "snps,dwc3";
>> +			reg = <0x0 0xfd000000 0x0 0x400000>;
>> +			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
>> +			dr_mode = "host";
>> +			phy_type = "utmi_wide";
>> +			phys = <&usb2phy0_host>, <&combphy1 PHY_TYPE_USB3>;
>> +			phy-names = "usb2-phy", "usb3-phy";
>> +			power-domains = <&power RK3568_PD_PIPE>;
>> +			resets = <&cru SRST_USB3OTG1>;
> 
>> +			reset-names = "usb3-host";
> 
>   reset-names:
>     const: usb3-otg
> 
> Fix binding or DT ??
> 
>> +			snps,dis-del-phy-power-chg-quirk;
>> +			snps,dis_enblslpm_quirk;
>> +			snps,dis_rxdet_inp3_quirk;
>> +			snps,dis-tx-ipgap-linecheck-quirk;
>> +			snps,dis-u2-freeclk-exists-quirk;
> 
>> +			snps,xhci-trb-ent-quirk;
> 
> Not in mainline ??
> 
>> +		};
>> +	};
>> +
> 
> 
> 	usbdrd3_1: usb at fd000000 {

> 		compatible = "rockchip,rk3399-dwc3", "snps,dwc3";

compatible = "rockchip,rk3568-dwc3", "snps,dwc3";

> 		reg = <0x0 0xfd000000 0x0 0x400000>;
> 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
> 		clocks = <&cru CLK_USB3OTG1_REF>,
> 			 <&cru CLK_USB3OTG1_SUSPEND>,
> 			 <&cru ACLK_USB3OTG1>;
> 		clock-names = "ref_clk", "suspend_clk", "bus_clk";
> 		dr_mode = "host";
> 		phy_type = "utmi_wide";
> 		phys = <&usb2phy0_host>, <&combphy1 PHY_TYPE_USB3>;
> 		phy-names = "usb2-phy", "usb3-phy";
> 		power-domains = <&power RK3568_PD_PIPE>;
> 		resets = <&cru SRST_USB3OTG1>;
> 		reset-names = "usb3-otg";
> 		snps,dis-del-phy-power-chg-quirk;
> 		snps,dis_enblslpm_quirk;
> 		snps,dis_rxdet_inp3_quirk;
> 		snps,dis-tx-ipgap-linecheck-quirk;
> 		snps,dis-u2-freeclk-exists-quirk;
> 		status = "disabled";
> 	};
> 
> 
>>  	gic: interrupt-controller at fd400000 {
>>  		compatible = "arm,gic-v3";
>>  		reg = <0x0 0xfd400000 0 0x10000>, /* GICD */



More information about the Linux-rockchip mailing list