[PATCH] arm64: dts: rockchip: Correct clock-output-names for rk817

[Chris Morgan]

From: Chris Morgan <macromorgan at hotmail.com>

According to the datasheet for the rk817 there is only a single output
clock for the PMIC. I don't believe this is causing any harm though
and testing this change doesn't appear to have any noticeable effects.

Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index ea0695b51ecd..5b23e607876e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -296,7 +296,7 @@ rk817: pmic at 20 {
 		reg = <0x20>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
-		clock-output-names = "rk808-clkout1", "xin32k";
+		clock-output-names = "rk808-clkout1";
 		clock-names = "mclk";
 		clocks = <&cru SCLK_I2S1_OUT>;
 		pinctrl-names = "default";
-- 
2.25.1