[PATCHv2 linux-next 4/4] ARM: dts: rockchip: rv1126: Enable Ethernet for Neu2-IO

[Anand Moon]

Hi Jagan,

Thanks for your review comments.

On Mon, 26 Dec 2022 at 15:22, Jagan Teki <jagan at edgeble.ai> wrote:
>
> On Mon, 26 Dec 2022 at 12:08, Anand Moon <anand at edgeble.ai> wrote:
> >
> > Rockchip RV1126 has GMAC 10/100/1000M ethernet controller.
> > Enable ethernet node on Neu2-IO board.
> >
> > Signed-off-by: Anand Moon <anand at edgeble.ai>
> > ---
> > drop SoB of Jagan Teki
> > ---
> >  arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts | 37 ++++++++++++++++++++
> >  1 file changed, 37 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
> > index dded0a12f0cd..bd592026eae6 100644
> > --- a/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
> > +++ b/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
> > @@ -22,6 +22,43 @@ chosen {
> >         };
> >  };
> >
> > +&gmac {
> > +       clock_in_out = "input";
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&rgmiim1_pins &clk_out_ethernetm1_pins>;
> > +       phy-mode = "rgmii";
> > +       phy-handle = <&phy>;
>
> arch/arm/boot/dts/rv1126-edgeble-neu2-io.dtb: phy at 0: '#phy-cells' is a
> required property     From schema:
> /home/j/.local/lib/python3.8/site-packages/dtschema/schemas/phy/phy-provider.yaml
>
Ok, I will update this in the next version.
> > +       assigned-clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>,
> > +                       <&cru CLK_GMAC_ETHERNET_OUT>;
> > +       assigned-clock-parents = <&cru CLK_GMAC_SRC_M1>, <&cru RGMII_MODE_CLK>;
> > +       assigned-clock-rates = <125000000>, <0>, <25000000>;
>
> Keep them in sorting order.
ok,
>
> Jagan.

Thanks


-Anand