[PATCH V4 07/11] arm64: dts: imx8mq: Enable both G1 and G2 VPU's with vpu-blk-ctrl
Lucas Stach
l.stach at pengutronix.de
Tue Apr 26 03:43:51 PDT 2022
Am Dienstag, dem 26.04.2022 um 09:38 +0200 schrieb Martin Kepplinger:
> Am Montag, dem 25.04.2022 um 17:34 +0200 schrieb Lucas Stach:
> > Hi Martin,
> >
> > Am Montag, dem 25.04.2022 um 17:22 +0200 schrieb Martin Kepplinger:
> > > Am Dienstag, dem 25.01.2022 um 11:11 -0600 schrieb Adam Ford:
> > > > With the Hantro G1 and G2 now setup to run independently, update
> > > > the device tree to allow both to operate. This requires the
> > > > vpu-blk-ctrl node to be configured. Since vpu-blk-ctrl needs
> > > > certain clock enabled to handle the gating of the G1 and G2
> > > > fuses, the clock-parents and clock-rates for the various VPU's
> > > > to be moved into the pgc_vpu because they cannot get re-parented
> > > > once enabled, and the pgc_vpu is the highest in the chain.
> > > >
> > > > Signed-off-by: Adam Ford <aford173 at gmail.com>
> > > > Reported-by: kernel test robot <lkp at intel.com>
> > > > Reviewed-by: Ezequiel Garcia <ezequiel at vanguardiasur.com.ar>
> > > >
> > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > > b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > > index 2df2510d0118..549b2440f55d 100644
> > > > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > > @@ -737,7 +737,21 @@ pgc_gpu: power-domain at 5 {
> > > > pgc_vpu: power-domain at 6 {
> > > > #power-domain-
> > > > cells =
> > > > <0>;
> > > > reg =
> > > > <IMX8M_POWER_DOMAIN_VPU>;
> > > > - clocks = <&clk
> > > > IMX8MQ_CLK_VPU_DEC_ROOT>;
> > > > + clocks = <&clk
> > > > IMX8MQ_CLK_VPU_DEC_ROOT>,
> > > > + <&clk
> > > > IMX8MQ_CLK_VPU_G1_ROOT>,
> > > > + <&clk
> > > > IMX8MQ_CLK_VPU_G2_ROOT>;
> > > > + assigned-clocks =
> > > > <&clk IMX8MQ_CLK_VPU_G1>,
> > > > +
> > > > <&clk IMX8MQ_CLK_VPU_G2>,
> > > > +
> > > > <&clk IMX8MQ_CLK_VPU_BUS>,
> > > > +
> > > > <&clk IMX8MQ_VPU_PLL_BYPASS>;
> > > > + assigned-clock-
> > > > parents = <&clk IMX8MQ_VPU_PLL_OUT>,
> > > > +
> > > >
> > > > <&clk IMX8MQ_VPU_PLL_OUT>,
> > > > +
> > > >
> > > > <&clk IMX8MQ_SYS1_PLL_800M>,
> > > > +
> > > >
> > > > <&clk IMX8MQ_VPU_PLL>;
> > > > + assigned-clock-
> > > > rates
> > > > = <600000000>,
> > > > +
> > > >
> > > > <600000000>,
> > > > +
> > > >
> > > > <800000000>,
> > > > +
> > > >
> > > > <0>;
> > > > };
> > > >
> > > > pgc_disp: power-domain at 7
> > > > {
> > > > @@ -1457,30 +1471,31 @@ usb3_phy1: usb-phy at 382f0040 {
> > > > status = "disabled";
> > > > };
> > > >
> > > > - vpu: video-codec at 38300000 {
> > > > - compatible = "nxp,imx8mq-vpu";
> > > > - reg = <0x38300000 0x10000>,
> > > > - <0x38310000 0x10000>,
> > > > - <0x38320000 0x10000>;
> > > > - reg-names = "g1", "g2", "ctrl";
> > > > - interrupts = <GIC_SPI 7
> > > > IRQ_TYPE_LEVEL_HIGH>,
> > > > - <GIC_SPI 8
> > > > IRQ_TYPE_LEVEL_HIGH>;
> > > > - interrupt-names = "g1", "g2";
> > > > + vpu_g1: video-codec at 38300000 {
> > > > + compatible = "nxp,imx8mq-vpu-g1";
> > > > + reg = <0x38300000 0x10000>;
> > > > + interrupts = <GIC_SPI 7
> > > > IRQ_TYPE_LEVEL_HIGH>;
> > > > + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
> > > > + power-domains = <&vpu_blk_ctrl
> > > > IMX8MQ_VPUBLK_PD_G1>;
> > > > + };
> > > > +
> > > > + vpu_g2: video-codec at 38310000 {
> > > > + compatible = "nxp,imx8mq-vpu-g2";
> > > > + reg = <0x38310000 0x10000>;
> > > > + interrupts = <GIC_SPI 8
> > > > IRQ_TYPE_LEVEL_HIGH>;
> > > > + clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
> > > > + power-domains = <&vpu_blk_ctrl
> > > > IMX8MQ_VPUBLK_PD_G2>;
> > > > + };
> > > > +
> > > > + vpu_blk_ctrl: blk-ctrl at 38320000 {
> > > > + compatible = "fsl,imx8mq-vpu-blk-ctrl";
> > > > + reg = <0x38320000 0x100>;
> > > > + power-domains = <&pgc_vpu>, <&pgc_vpu>,
> > > > <&pgc_vpu>;
> > > > + power-domain-names = "bus", "g1", "g2";
> > > > clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
> > > > - <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
> > > > - <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
> > > > - clock-names = "g1", "g2", "bus";
> > > > - assigned-clocks = <&clk
> > > > IMX8MQ_CLK_VPU_G1>,
> > > > - <&clk
> > > > IMX8MQ_CLK_VPU_G2>,
> > > > - <&clk
> > > > IMX8MQ_CLK_VPU_BUS>,
> > > > - <&clk
> > > > IMX8MQ_VPU_PLL_BYPASS>;
> > > > - assigned-clock-parents = <&clk
> > > > IMX8MQ_VPU_PLL_OUT>,
> > > > - <&clk
> > > > IMX8MQ_VPU_PLL_OUT>,
> > > > - <&clk
> > > > IMX8MQ_SYS1_PLL_800M>,
> > > > - <&clk
> > > > IMX8MQ_VPU_PLL>;
> > > > - assigned-clock-rates = <600000000>,
> > > > <600000000>,
> > > > - <800000000>, <0>;
> > > > - power-domains = <&pgc_vpu>;
> > > > + <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
> > > > + clock-names = "g1", "g2";
> > > > + #power-domain-cells = <1>;
> > > > };
> > > >
> > > > pcie0: pcie at 33800000 {
> > >
> > > With this update, when testing suspend to ram on imx8mq, I get:
> > >
> > > buck4: failed to disable: -ETIMEDOUT
> > >
> > > where buck4 is power-supply of pgc_vpu. And thus the transition to
> > > suspend (and resuming) fails.
> > >
> > > Have you tested system suspend after the imx8m-blk-ctrl update on
> > > imx8mq?
> >
> > I haven't tested system suspend, don't know if anyone else did.
> > However
> > I guess that this is just uncovering a preexisting issue in the
> > system
> > suspend sequencing, which you would also hit if the video decoders
> > were
> > active at system suspend time.
> >
> > My guess is that the regulator disable fails, due to the power
> > domains
> > being disabled quite late in the suspend sequence, where i2c
> > communication with the PMIC is no longer possible due to i2c being
> > suspended already or something like that. Maybe you can dig in a bit
> > on
> > the actual sequence on your system and we can see how we can rework
> > things to suspend the power domains at a time where communication
> > with
> > the PMIC is still possible?
>
> What exactly would you like to see? Here's all gpcv2 regulators
> disabling on suspend. (gpu (domain 5) is disabled by runtime pm often):
>
> [ 47.138700] imx-pgc imx-pgc-domain.5: disabling regulator
> [ 47.298071] Freezing user space processes ... (elapsed 0.008
> seconds) done.
> [ 47.313432] OOM killer disabled.
> [ 47.316670] Freezing remaining freezable tasks ... (elapsed 2.221
> seconds) done.
> [ 49.672052] imx8m-blk-ctrl 38320000.blk-ctrl: imx8m_blk_ctrl_suspend
> start
> [ 49.704417] imx-pgc imx-pgc-domain.0: disabling regulator
> [ 49.711114] imx-pgc imx-pgc-domain.6: disabling regulator
> [ 49.819064] buck4: failed to disable: -ETIMEDOUT
>
> The stack looks pretty much the same for all of them, from pm_suspend()
> over genpd_suspend_noiry().
So the GPU domain is already suspended before the system suspend,
probably due to short runtime PM timeouts.
Can you please check at which point the i2c subsystem is suspended? I
think we are already past that point when running the PM domain suspend
from a _noirq callback. I'll take a look on how we can properly change
this ordering.
Regards,
Lucas
More information about the Linux-rockchip
mailing list