[PATCH 1/2] pinctrl: rockchip: fix RK3308 pinmux bits

[Luca Ceresoli]

Some of the pinmuxing bits described in rk3308_mux_recalced_data are wrong,
pointing to non-existing registers.

Fix the entire table.

Also add a comment in front of each entry with the same string that appears
in the datasheet to make the table easier to compare with the docs.

This fix has been tested on real hardware for the gpio3b3_sel entry.

Fixes: 7825aeb7b208 ("pinctrl: rockchip: add rk3308 SoC support")
Signed-off-by: Luca Ceresoli <luca.ceresoli at bootlin.com>
---
 drivers/pinctrl/pinctrl-rockchip.c | 45 ++++++++++++++++++++----------
 1 file changed, 30 insertions(+), 15 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index a1b598b86aa9..65fa305b5f59 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -457,95 +457,110 @@ static  struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = {
 
 static struct rockchip_mux_recalced_data rk3308_mux_recalced_data[] = {
 	{
+		/* gpio1b6_sel */
 		.num = 1,
 		.pin = 14,
 		.reg = 0x28,
 		.bit = 12,
 		.mask = 0xf
 	}, {
+		/* gpio1b7_sel */
 		.num = 1,
 		.pin = 15,
 		.reg = 0x2c,
 		.bit = 0,
 		.mask = 0x3
 	}, {
+		/* gpio1c2_sel */
 		.num = 1,
 		.pin = 18,
 		.reg = 0x30,
 		.bit = 4,
 		.mask = 0xf
 	}, {
+		/* gpio1c3_sel */
 		.num = 1,
 		.pin = 19,
 		.reg = 0x30,
 		.bit = 8,
 		.mask = 0xf
 	}, {
+		/* gpio1c4_sel */
 		.num = 1,
 		.pin = 20,
 		.reg = 0x30,
 		.bit = 12,
 		.mask = 0xf
 	}, {
+		/* gpio1c5_sel */
 		.num = 1,
 		.pin = 21,
 		.reg = 0x34,
 		.bit = 0,
 		.mask = 0xf
 	}, {
+		/* gpio1c6_sel */
 		.num = 1,
 		.pin = 22,
 		.reg = 0x34,
 		.bit = 4,
 		.mask = 0xf
 	}, {
+		/* gpio1c7_sel */
 		.num = 1,
 		.pin = 23,
 		.reg = 0x34,
 		.bit = 8,
 		.mask = 0xf
 	}, {
+		/* gpio3b4_sel */
 		.num = 3,
 		.pin = 12,
 		.reg = 0x68,
 		.bit = 8,
 		.mask = 0xf
 	}, {
+		/* gpio3b5_sel */
 		.num = 3,
 		.pin = 13,
 		.reg = 0x68,
 		.bit = 12,
 		.mask = 0xf
 	}, {
+		/* gpio2a2_sel */
 		.num = 2,
 		.pin = 2,
-		.reg = 0x608,
-		.bit = 0,
-		.mask = 0x7
+		.reg = 0x40,
+		.bit = 4,
+		.mask = 0x3
 	}, {
+		/* gpio2a3_sel */
 		.num = 2,
 		.pin = 3,
-		.reg = 0x608,
-		.bit = 4,
-		.mask = 0x7
+		.reg = 0x40,
+		.bit = 6,
+		.mask = 0x3
 	}, {
+		/* gpio2c0_sel */
 		.num = 2,
 		.pin = 16,
-		.reg = 0x610,
-		.bit = 8,
-		.mask = 0x7
+		.reg = 0x50,
+		.bit = 0,
+		.mask = 0x3
 	}, {
+		/* gpio3b2_sel */
 		.num = 3,
 		.pin = 10,
-		.reg = 0x610,
-		.bit = 0,
-		.mask = 0x7
+		.reg = 0x68,
+		.bit = 4,
+		.mask = 0x3
 	}, {
+		/* gpio3b3_sel */
 		.num = 3,
 		.pin = 11,
-		.reg = 0x610,
-		.bit = 4,
-		.mask = 0x7
+		.reg = 0x68,
+		.bit = 6,
+		.mask = 0x3
 	},
 };
 
-- 
2.25.1