[BUG] Re: [PATCH v3 07/10] media: hantro: Enable H.264 on Rockchip VDPU2

Nicolas Dufresne nicolas at ndufresne.ca
Thu Oct 14 11:17:29 PDT 2021


Le lundi 19 juillet 2021 à 17:52 -0300, Ezequiel Garcia a écrit :
> Given H.264 support for VDPU2 was just added, let's enable it.
> For now, this is only enabled on platform that don't have
> an RKVDEC core, such as RK3328.

There is a small oops, the decoder is now visible on RK3399. At least for
GStreamer, it got tricked in picking it by default, which regress decoding
performance. I still think we should wait before enabling it until we know that
userspace have infrastructure to rank them properly.

> 
> Signed-off-by: Ezequiel Garcia <ezequiel at collabora.com>
> Tested-by: Alex Bee <knaerzche at gmail.com>
> ---
>  .../staging/media/hantro/rockchip_vpu_hw.c    | 26 ++++++++++++++++++-
>  1 file changed, 25 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/staging/media/hantro/rockchip_vpu_hw.c b/drivers/staging/media/hantro/rockchip_vpu_hw.c
> index 3ccc16413f42..e4e3b5e7689b 100644
> --- a/drivers/staging/media/hantro/rockchip_vpu_hw.c
> +++ b/drivers/staging/media/hantro/rockchip_vpu_hw.c
> @@ -162,6 +162,19 @@ static const struct hantro_fmt rk3399_vpu_dec_fmts[] = {
>  		.fourcc = V4L2_PIX_FMT_NV12,
>  		.codec_mode = HANTRO_MODE_NONE,
>  	},
> +	{
> +		.fourcc = V4L2_PIX_FMT_H264_SLICE,
> +		.codec_mode = HANTRO_MODE_H264_DEC,
> +		.max_depth = 2,
> +		.frmsize = {
> +			.min_width = 48,
> +			.max_width = 1920,
> +			.step_width = MB_DIM,
> +			.min_height = 48,
> +			.max_height = 1088,
> +			.step_height = MB_DIM,
> +		},
> +	},
>  	{
>  		.fourcc = V4L2_PIX_FMT_MPEG2_SLICE,
>  		.codec_mode = HANTRO_MODE_MPEG2_DEC,
> @@ -388,6 +401,12 @@ static const struct hantro_codec_ops rk3399_vpu_codec_ops[] = {
>  		.init = hantro_jpeg_enc_init,
>  		.exit = hantro_jpeg_enc_exit,
>  	},
> +	[HANTRO_MODE_H264_DEC] = {
> +		.run = rockchip_vpu2_h264_dec_run,
> +		.reset = rockchip_vpu2_dec_reset,
> +		.init = hantro_h264_dec_init,
> +		.exit = hantro_h264_dec_exit,
> +	},
>  	[HANTRO_MODE_MPEG2_DEC] = {
>  		.run = rockchip_vpu2_mpeg2_dec_run,
>  		.reset = rockchip_vpu2_dec_reset,
> @@ -433,6 +452,8 @@ static const char * const rockchip_vpu_clk_names[] = {
>  	"aclk", "hclk"
>  };
>  
> +/* VDPU1/VEPU1 */
> +
>  const struct hantro_variant rk3036_vpu_variant = {
>  	.dec_offset = 0x400,
>  	.dec_fmts = rk3066_vpu_dec_fmts,
> @@ -495,11 +516,14 @@ const struct hantro_variant rk3288_vpu_variant = {
>  	.num_clocks = ARRAY_SIZE(rockchip_vpu_clk_names)
>  };
>  
> +/* VDPU2/VEPU2 */
> +
>  const struct hantro_variant rk3328_vpu_variant = {
>  	.dec_offset = 0x400,
>  	.dec_fmts = rk3399_vpu_dec_fmts,
>  	.num_dec_fmts = ARRAY_SIZE(rk3399_vpu_dec_fmts),
> -	.codec = HANTRO_MPEG2_DECODER | HANTRO_VP8_DECODER,
> +	.codec = HANTRO_MPEG2_DECODER | HANTRO_VP8_DECODER |
> +		 HANTRO_H264_DECODER,
>  	.codec_ops = rk3399_vpu_codec_ops,
>  	.irqs = rockchip_vdpu2_irqs,
>  	.num_irqs = ARRAY_SIZE(rockchip_vdpu2_irqs),





More information about the Linux-rockchip mailing list