[PATCH v4 RESEND 3/4] power: supply: Add charger driver for Rockchip RK817
Sebastian Reichel
sebastian.reichel at collabora.com
Wed Oct 13 10:40:21 PDT 2021
Hi,
On Thu, Sep 16, 2021 at 02:42:07PM -0500, Chris Morgan wrote:
> Add support for the Rockchip rk817 battery charger integrated into the
> rk817 PMIC.
>
> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> Signed-off-by: Maya Matuszczyk <maccraft123mc at gmail.com>
> ---
> drivers/power/supply/Kconfig | 6 +
> drivers/power/supply/Makefile | 1 +
> drivers/power/supply/rk817_charger.c | 959 +++++++++++++++++++++++++++
> 3 files changed, 966 insertions(+)
> create mode 100644 drivers/power/supply/rk817_charger.c
Acked-by: Sebastian Reichel <sebastian.reichel at collabora.com>
-- Sebastian
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index 11f5368e810e..311130da36ff 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -666,6 +666,12 @@ config CHARGER_BQ256XX
> charge management and system power path management devices for single
> cell Li-ion and Li-polymer batteries.
>
> +config CHARGER_RK817
> + tristate "Rockchip RK817 PMIC Battery Charger"
> + depends on MFD_RK808
> + help
> + Say Y to include support for Rockchip RK817 Battery Charger.
> +
> config CHARGER_SMB347
> tristate "Summit Microelectronics SMB3XX Battery Charger"
> depends on I2C
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index 33059a91f60c..9497d2105712 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -87,6 +87,7 @@ obj-$(CONFIG_CHARGER_BQ2515X) += bq2515x_charger.o
> obj-$(CONFIG_CHARGER_BQ25890) += bq25890_charger.o
> obj-$(CONFIG_CHARGER_BQ25980) += bq25980_charger.o
> obj-$(CONFIG_CHARGER_BQ256XX) += bq256xx_charger.o
> +obj-$(CONFIG_CHARGER_RK817) += rk817_charger.o
> obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
> obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
> obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o
> diff --git a/drivers/power/supply/rk817_charger.c b/drivers/power/supply/rk817_charger.c
> new file mode 100644
> index 000000000000..34338aebe269
> --- /dev/null
> +++ b/drivers/power/supply/rk817_charger.c
> @@ -0,0 +1,959 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Charger Driver for Rockchip rk817
> + *
> + * Copyright (c) 2021
> + *
> + * Authors: Maya Matuszczyk <maccraft123mc at gmail.com>
> + * Chris Morgan <macromorgan at hotmail.com>
> + */
> +
> +#include <linux/mfd/rk808.h>
> +#include <linux/irq.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/power_supply.h>
> +#include <asm/unaligned.h>
> +
> +/* Charging statuses reported by hardware register */
> +enum rk817_charge_status {
> + CHRG_OFF,
> + DEAD_CHRG,
> + TRICKLE_CHRG,
> + CC_OR_CV_CHRG,
> + CHARGE_FINISH,
> + USB_OVER_VOL,
> + BAT_TMP_ERR,
> + BAT_TIM_ERR,
> +};
> +
> +/* Max charging current read to/written from hardware register.
> + * Note how highest value corresponding to 0x7 is the lowest
> + * current, this is per the datasheet.
> + */
> +enum rk817_chg_cur {
> + CHG_1A,
> + CHG_1_5A,
> + CHG_2A,
> + CHG_2_5A,
> + CHG_2_75A,
> + CHG_3A,
> + CHG_3_5A,
> + CHG_0_5A,
> +};
> +
> +struct rk817_charger {
> + struct device *dev;
> + struct rk808 *rk808;
> +
> + struct power_supply *bat_ps;
> + struct power_supply *chg_ps;
> + bool plugged_in;
> +
> + /* The voltage_k and voltage_b values are used to calibrate the ADC
> + * voltage readings. While they are documented in the BSP kernel and
> + * datasheet as voltage_k and voltage_b, there is no further
> + * information explaining them in more detail.
> + */
> +
> + uint32_t voltage_k;
> + uint32_t voltage_b;
> +
> + /* Storing immutable values of battery here so we can release
> + * get_battery_info after the probe and use these values.
> + */
> + int bat_charge_full_design_uah;
> + int bat_voltage_min_design_uv;
> + int bat_voltage_max_design_uv;
> +
> + /* dsoc seems to be difference between full charge and actual charge in
> + * BSP stored as a percentage, to the thousandth.
> + */
> + int dsoc;
> +
> + /* Calibrate the DSOC on a fully charged battery, this way we can use
> + * the calibrated DSOC value to correct for columb counter drift.
> + */
> + bool dsoc_cal;
> +
> + /* Implementation specific properties from device tree */
> + int res_div;
> + int sleep_enter_current;
> + int sleep_filter_current;
> +};
> +
> +/* ADC coefficients extracted from BSP kernel */
> +#define ADC_TO_CURRENT(adc_value, res_div) \
> + (adc_value * 172 / res_div)
> +
> +#define CURRENT_TO_ADC(current, samp_res) \
> + (current * samp_res / 172)
> +
> +#define CHARGE_TO_ADC(capacity, res_div) \
> + (capacity * res_div * 3600 / 172 * 1000)
> +
> +#define ADC_TO_CHARGE_UAH(adc_value, res_div) \
> + (adc_value / 3600 * 172 / res_div)
> +
> +#define ADC_TO_CAPACITY(adc_value, res_div) \
> + (adc_value / 1000 * 172 / 3600 / res_div)
> +
> +static u8 rk817_chg_cur_to_reg(u32 chg_cur_ma)
> +{
> + if (chg_cur_ma > 3500)
> + return CHG_3_5A;
> + else if (chg_cur_ma > 3000)
> + return CHG_3A;
> + else if (chg_cur_ma > 2750)
> + return CHG_2_75A;
> + else if (chg_cur_ma > 2500)
> + return CHG_2_5A;
> + else if (chg_cur_ma > 2000)
> + return CHG_2A;
> + else if (chg_cur_ma > 1500)
> + return CHG_1_5A;
> + else if (chg_cur_ma > 1000)
> + return CHG_1A;
> + else if (chg_cur_ma > 500)
> + return CHG_0_5A;
> + else
> + return -EINVAL;
> +}
> +
> +static int rk817_chg_cur_from_reg(u8 reg)
> +{
> + switch (reg) {
> + case CHG_0_5A:
> + return 500000;
> + case CHG_1A:
> + return 1000000;
> + case CHG_1_5A:
> + return 1500000;
> + case CHG_2A:
> + return 2000000;
> + case CHG_2_5A:
> + return 2500000;
> + case CHG_2_75A:
> + return 2750000;
> + case CHG_3A:
> + return 3000000;
> + case CHG_3_5A:
> + return 3500000;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static void rk817_bat_calib_vol(struct rk817_charger *charger)
> +{
> + uint32_t vcalib0 = 0;
> + uint32_t vcalib1 = 0;
> + u8 bulk_reg[2];
> +
> + /* calibrate voltage */
> + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_VCALIB0_H,
> + bulk_reg, 2);
> + vcalib0 = get_unaligned_be16(bulk_reg);
> +
> + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_VCALIB1_H,
> + bulk_reg, 2);
> + vcalib1 = get_unaligned_be16(bulk_reg);
> +
> + /* values were taken from BSP kernel */
> + charger->voltage_k = (4025 - 2300) * 1000 /
> + ((vcalib1 - vcalib0) ? (vcalib1 - vcalib0) : 1);
> + charger->voltage_b = 4025 - (charger->voltage_k * vcalib1) / 1000;
> +}
> +
> +static void rk817_bat_calib_cur(struct rk817_charger *charger)
> +{
> + u8 bulk_reg[2];
> +
> + /* calibrate current */
> + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_IOFFSET_H,
> + bulk_reg, 2);
> + regmap_bulk_write(charger->rk808->regmap, RK817_GAS_GAUGE_CAL_OFFSET_H,
> + bulk_reg, 2);
> +}
> +
> +static int rk817_bat_calib_cap(struct rk817_charger *charger)
> +{
> + struct rk808 *rk808 = charger->rk808;
> + int reg, tmp, charge_now, charge_now_adc, dsoc_value;
> + u8 bulk_reg[4];
> +
> + /* Calibrate the dsoc on a fully charged battery */
> +
> + regmap_read(rk808->regmap, RK817_PMIC_CHRG_STS, ®);
> + tmp = (reg >> 4) & 0x07;
> + if (tmp == CHARGE_FINISH) {
> + /* Read the columb counter */
> + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3,
> + bulk_reg, 4);
> + charge_now_adc = get_unaligned_be32(bulk_reg);
> + if (charge_now_adc < 0)
> + charge_now_adc = 0;
> + charge_now = ADC_TO_CHARGE_UAH(charge_now_adc, charger->res_div);
> +
> + /* Get and set our DSOC value with a full charge */
> +
> + dsoc_value = ((charge_now * 100) /
> + (charger->bat_charge_full_design_uah / 1000));
> +
> + if (!charger->dsoc_cal) {
> + if (dsoc_value > 100000)
> + charger->dsoc = 100000;
> + if (dsoc_value != charger->dsoc) {
> + charger->dsoc = dsoc_value;
> + put_unaligned_le24(dsoc_value, bulk_reg);
> + regmap_bulk_write(rk808->regmap,
> + RK817_GAS_GAUGE_BAT_R1,
> + bulk_reg, 3);
> + }
> + /* Mark our dsoc as calibrated. */
> + charger->dsoc_cal = 1;
> + }
> +
> + /* In the event our columb counter has drifted over the
> + * calibrated dsoc of the battery, adjust the columb counter
> + * to correct the drift. Don't do this unless we already
> + * calibrated our dsoc at a fully charged state.
> + */
> +
> + if (dsoc_value > charger->dsoc && charger->dsoc_cal) {
> + /* Order of operations matters here to ensure we keep
> + * enough precision until the last step to keep from
> + * making needless updates to columb counter.
> + */
> + charge_now = charger->dsoc *
> + (charger->bat_charge_full_design_uah
> + / 1000) / 100;
> + charge_now_adc = CHARGE_TO_ADC((charge_now / 1000),
> + charger->res_div);
> +
> + put_unaligned_be32(charge_now_adc, bulk_reg);
> + regmap_bulk_write(rk808->regmap,
> + RK817_GAS_GAUGE_Q_INIT_H3,
> + bulk_reg, 4);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int rk817_bat_get_prop(struct power_supply *ps,
> + enum power_supply_property prop,
> + union power_supply_propval *val)
> +{
> + struct rk817_charger *charger = power_supply_get_drvdata(ps);
> + uint32_t tmp = 0;
> + /* Registers for current is a signed 16bit int */
> + short int cur = 0;
> + /* Registers for capacity-now is a signed 32bit int */
> + int32_t charge_now = 0;
> + int ret = 0;
> + int reg = 0;
> + u8 bulk_reg[4];
> + struct rk808 *rk808 = charger->rk808;
> +
> + /* Recalibrate voltage and current readings if we need to BSP does both
> + * on CUR_CALIB_UPD, ignoring VOL_CALIB_UPD. Curiously enough, both
> + * documentation and the BSP show that you perform an update if bit 7
> + * is 1, but you clear the status by writing a 1 to bit 7.
> + */
> + regmap_read(rk808->regmap, RK817_GAS_GAUGE_ADC_CONFIG1, ®);
> + tmp = (reg >> 7) & 0x01;
> + if (tmp) {
> + rk817_bat_calib_cur(charger);
> + rk817_bat_calib_vol(charger);
> + regmap_write_bits(rk808->regmap, RK817_GAS_GAUGE_ADC_CONFIG1,
> + RK817_CUR_CALIB_UPD, (1 << 7));
> + }
> +
> + rk817_bat_calib_cap(charger);
> +
> + switch (prop) {
> + case POWER_SUPPLY_PROP_PRESENT:
> + regmap_read(rk808->regmap, RK817_PMIC_CHRG_STS, ®);
> + val->intval = (reg >> 7);
> + break;
> + case POWER_SUPPLY_PROP_STATUS:
> + if (!charger->plugged_in) {
> + val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> + break;
> + }
> + ret = regmap_read(rk808->regmap, RK817_PMIC_CHRG_STS, ®);
> + if (ret)
> + return ret;
> + tmp = (reg >> 4) & 0x07;
> + switch (tmp) {
> + case CHRG_OFF:
> + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
> + break;
> + /* Dead charge is documented, but not explained. I never
> + * observed it but assume it's a pre-charge for a dead
> + * battery.
> + */
> + case DEAD_CHRG:
> + case TRICKLE_CHRG:
> + case CC_OR_CV_CHRG:
> + val->intval = POWER_SUPPLY_STATUS_CHARGING;
> + break;
> + case CHARGE_FINISH:
> + val->intval = POWER_SUPPLY_STATUS_FULL;
> + break;
> + default:
> + val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
> + return -EINVAL;
> +
> + }
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_TYPE:
> + ret = regmap_read(rk808->regmap, RK817_PMIC_CHRG_STS, ®);
> + if (ret)
> + return ret;
> + tmp = (reg >> 4) & 0x07;
> + switch (tmp) {
> + case CHRG_OFF:
> + case CHARGE_FINISH:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
> + break;
> + case TRICKLE_CHRG:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
> + break;
> + case DEAD_CHRG:
> + case CC_OR_CV_CHRG:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
> + break;
> + default:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
> + break;
> + }
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_FULL:
> + val->intval = ((charger->bat_charge_full_design_uah /
> + 1000) * charger->dsoc) / 100;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> + val->intval = charger->bat_charge_full_design_uah;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
> + val->intval = 0;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_NOW:
> + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3,
> + bulk_reg, 4);
> + charge_now = get_unaligned_be32(bulk_reg);
> + if (charge_now < 0)
> + charge_now = 0;
> + val->intval = ADC_TO_CHARGE_UAH(charge_now, charger->res_div);
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
> + val->intval = charger->bat_voltage_min_design_uv;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_BOOT:
> + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_PWRON_VOL_H,
> + bulk_reg, 2);
> + tmp = get_unaligned_be16(bulk_reg);
> + val->intval = (charger->voltage_k * tmp) +
> + 1000 * charger->voltage_b;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_AVG:
> + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_BAT_VOL_H,
> + bulk_reg, 2);
> + tmp = get_unaligned_be16(bulk_reg);
> + val->intval = (charger->voltage_k * tmp) +
> + 1000 * charger->voltage_b;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_OCV:
> + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_OCV_VOL_H,
> + bulk_reg, 2);
> + tmp = get_unaligned_be16(bulk_reg);
> + val->intval = (charger->voltage_k * tmp) +
> + 1000 * charger->voltage_b;
> + break;
> + case POWER_SUPPLY_PROP_CURRENT_BOOT:
> + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_PWRON_CUR_H,
> + bulk_reg, 2);
> + cur = get_unaligned_be16(bulk_reg);
> + val->intval = ADC_TO_CURRENT(cur, charger->res_div);
> + break;
> + case POWER_SUPPLY_PROP_CURRENT_AVG:
> + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_BAT_CUR_H,
> + bulk_reg, 2);
> + cur = get_unaligned_be16(bulk_reg);
> + val->intval = ADC_TO_CURRENT(cur, charger->res_div);
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> + regmap_read(rk808->regmap, RK817_PMIC_CHRG_OUT, &tmp);
> + val->intval = rk817_chg_cur_from_reg(tmp & RK817_CHRG_CUR_SEL);
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
> + regmap_read(rk808->regmap, RK817_PMIC_CHRG_OUT, &tmp);
> + val->intval = ((((tmp & RK817_CHRG_VOL_SEL) >> 4) * 50000) +
> + 4100000);
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> + val->intval = charger->bat_voltage_max_design_uv;
> + break;
> + default:
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static int rk817_chg_get_prop(struct power_supply *ps,
> + enum power_supply_property prop,
> + union power_supply_propval *val)
> +{
> + struct rk817_charger *charger = power_supply_get_drvdata(ps);
> + int vol, tmp = 0;
> + u8 bulk_reg[2];
> +
> + switch (prop) {
> + case POWER_SUPPLY_PROP_ONLINE:
> + val->intval = charger->plugged_in;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> + /* max voltage from datasheet at 5.5v (default 5.0v) */
> + val->intval = 5500000;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
> + /* min voltage from datasheet at 3.8v (default 5.0v) */
> + val->intval = 3800000;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_AVG:
> + /* Note that on my example hardware (an Odroid Go Advance) the
> + * voltage of the power connector is measured on the register
> + * labelled USB in the datasheet; I don't know if this is how
> + * it is designed or just a quirk of the implementation. I
> + * believe this will also measure the voltage of the USB output
> + * when in OTG mode, if that is the case we may need to change
> + * this in the future to return 0 if the power supply status
> + * is offline.
> + */
> + regmap_bulk_read(charger->rk808->regmap,
> + RK817_GAS_GAUGE_USB_VOL_H,
> + bulk_reg, 2);
> + tmp = get_unaligned_be16(bulk_reg);
> + vol = ((charger->voltage_k * tmp / 1000 + charger->voltage_b) *
> + 60 / 46);
> + val->intval = vol * 1000;
> + break;
> + /* While it's possible that other implementations could use different
> + * USB types, the current implementation for this PMIC (the Odroid Go
> + * Advance) only uses a dedicated charging port with no rx/tx lines.
> + */
> + case POWER_SUPPLY_PROP_USB_TYPE:
> + val->intval = POWER_SUPPLY_USB_TYPE_DCP;
> + break;
> + default:
> + return -EINVAL;
> + }
> + return 0;
> +
> +}
> +
> +static irqreturn_t rk817_plug_in_isr(int irq, void *cg)
> +{
> + struct rk817_charger *charger;
> +
> + charger = (struct rk817_charger *)cg;
> + charger->plugged_in = 1;
> + power_supply_changed(charger->chg_ps);
> + power_supply_changed(charger->bat_ps);
> + dev_dbg(charger->dev, "Power Cord Inserted\n");
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t rk817_plug_out_isr(int irq, void *cg)
> +{
> + struct rk817_charger *charger;
> + struct rk808 *rk808;
> +
> + charger = (struct rk817_charger *)cg;
> + rk808 = charger->rk808;
> + charger->plugged_in = 0;
> + power_supply_changed(charger->bat_ps);
> + power_supply_changed(charger->chg_ps);
> +
> + /* For some reason the bits of RK817_PMIC_CHRG_IN reset whenever the
> + * power cord is unplugged. This was not documented in the BSP kernel
> + * or the datasheet and only discovered by trial and error. Set minimum
> + * USB input voltage to 4.5v and enable USB voltage input limit.
> + */
> + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN,
> + RK817_USB_VLIM_SEL, (0x05 << 4));
> + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_VLIM_EN,
> + (0x01 << 7));
> +
> + /* Set average USB input current limit to 1.5A and enable USB current
> + * input limit.
> + */
> + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN,
> + RK817_USB_ILIM_SEL, 0x03);
> + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_ILIM_EN,
> + (0x01 << 3));
> +
> + dev_dbg(charger->dev, "Power Cord Removed\n");
> +
> + return IRQ_HANDLED;
> +}
> +
> +static enum power_supply_property rk817_bat_props[] = {
> + POWER_SUPPLY_PROP_PRESENT,
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_CHARGE_TYPE,
> + POWER_SUPPLY_PROP_CHARGE_FULL,
> + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
> + POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
> + POWER_SUPPLY_PROP_CHARGE_NOW,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
> + POWER_SUPPLY_PROP_VOLTAGE_BOOT,
> + POWER_SUPPLY_PROP_VOLTAGE_AVG,
> + POWER_SUPPLY_PROP_VOLTAGE_OCV,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
> + POWER_SUPPLY_PROP_CURRENT_BOOT,
> + POWER_SUPPLY_PROP_CURRENT_AVG,
> + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
> + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
> +};
> +
> +static enum power_supply_property rk817_chg_props[] = {
> + POWER_SUPPLY_PROP_ONLINE,
> + POWER_SUPPLY_PROP_USB_TYPE,
> + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
> + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
> + POWER_SUPPLY_PROP_VOLTAGE_AVG,
> +};
> +
> +static enum power_supply_usb_type rk817_usb_type[] = {
> + POWER_SUPPLY_USB_TYPE_DCP,
> + POWER_SUPPLY_USB_TYPE_UNKNOWN,
> +};
> +
> +static const struct power_supply_desc rk817_bat_desc = {
> + .name = "rk817-battery",
> + .type = POWER_SUPPLY_TYPE_BATTERY,
> + .properties = rk817_bat_props,
> + .num_properties = ARRAY_SIZE(rk817_bat_props),
> + .get_property = rk817_bat_get_prop,
> +};
> +
> +static const struct power_supply_desc rk817_chg_desc = {
> + .name = "rk817-charger",
> + .type = POWER_SUPPLY_TYPE_USB,
> + .usb_types = rk817_usb_type,
> + .num_usb_types = ARRAY_SIZE(rk817_usb_type),
> + .properties = rk817_chg_props,
> + .num_properties = ARRAY_SIZE(rk817_chg_props),
> + .get_property = rk817_chg_get_prop,
> +};
> +
> +static int
> +rk817_read_or_set_full_charge_on_boot(struct rk817_charger *charger,
> + struct power_supply_battery_info *bat_info)
> +{
> + struct rk808 *rk808 = charger->rk808;
> + u8 bulk_reg[4];
> + u32 design_charge_mah = (charger->bat_charge_full_design_uah / 1000);
> + u32 boot_voltage, boot_charge, tmp, full_charge_cap;
> + int ret, boot_capacity;
> +
> + /* Read DSOC value if pre-existing. If not, initialize at 100%.
> + * Note endianness, also register says it's for resistance,
> + * however BSP kernel treats this as an nvram field for the DSOC
> + * as best I can tell. Doing the same for backwards compatibility.
> + */
> + ret = regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_BAT_R1, bulk_reg, 3);
> + if (ret < 0)
> + return ret;
> + charger->dsoc = get_unaligned_le24(bulk_reg);
> + /* If we have an invalid DSOC, write 100 (100000) as default. */
> + if (charger->dsoc < 1000 || charger->dsoc > 100000) {
> + charger->dsoc = 100000;
> + put_unaligned_le24(charger->dsoc, bulk_reg);
> + regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_BAT_R1,
> + bulk_reg, 3);
> + }
> +
> + /* Register appears to be nvram that stores capacity in mAH. Note
> + * endianness, keeping consistent with BSP kernel, however it looks
> + * like we can use any arbitrary method to store value if we don't care
> + * about compatibility. Additionally, it doesn't appear that this value
> + * is used for anything, so realistically getting it and setting it is
> + * to ensure backward compatibility with BSP and serves no purpose with
> + * this driver, and I'm not sure if the BSP driver does anything with
> + * this value either.
> + */
> +
> + ret = regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_DATA3, bulk_reg, 3);
> + if (ret < 0)
> + return ret;
> +
> + full_charge_cap = get_unaligned_le24(bulk_reg);
> +
> + /* Sanity checking for values equal to zero or less than would be
> + * practical for this device (BSP Kernel assumes 500mAH or less) for
> + * practicality purposes.
> + */
> + if (full_charge_cap < 500) {
> + put_unaligned_le24(design_charge_mah, bulk_reg);
> + ret = regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_DATA3, bulk_reg, 3);
> + if (ret < 0)
> + return ret;
> + dev_info(charger->dev,
> + "Invalid NVRAM Data for max charge, setting to design capacity %u uAH\n",
> + design_charge_mah*1000);
> + }
> +
> + /* Capture boot voltage and look up boot capacity from OCV tables. */
> +
> + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_PWRON_VOL_H,
> + bulk_reg, 2);
> + tmp = get_unaligned_be16(bulk_reg);
> + boot_voltage = (charger->voltage_k * tmp) + 1000 * charger->voltage_b;
> + /* Since only implementation has no working thermistor, assume 20C for
> + * OCV lookup. If lookup fails, report error with OCV table.
> + */
> + boot_capacity = power_supply_batinfo_ocv2cap(bat_info, boot_voltage, 20);
> + if (boot_capacity < 0) {
> + return dev_err_probe(charger->dev,
> + boot_capacity,
> + "Unable to read boot charge from OCV table: %i\n",
> + boot_capacity);
> + }
> +
> + /* Write boot charge to registers, estimate boot charge based on
> + * capacity and max charge of battery.
> + */
> + boot_charge = (boot_capacity * charger->bat_charge_full_design_uah) / 100;
> + tmp = CHARGE_TO_ADC((boot_charge / 1000), charger->res_div);
> + put_unaligned_be32(tmp, bulk_reg);
> + regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_Q_INIT_H3,
> + bulk_reg, 4);
> +
> + /* Set QMAX value to max design capacity. */
> + tmp = CHARGE_TO_ADC((charger->bat_charge_full_design_uah / 1000),
> + charger->res_div);
> + put_unaligned_be32(tmp, bulk_reg);
> + ret = regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_Q_MAX_H3,
> + bulk_reg, 4);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int rk817_battery_init(struct rk817_charger *charger,
> + struct power_supply_battery_info *bat_info)
> +{
> + struct rk808 *rk808 = charger->rk808;
> + u32 tmp, max_chg_vol_mv, max_chg_cur_ma;
> + u8 max_chg_vol_reg, chg_term_i_reg, max_chg_cur_reg;
> + int ret, chg_term_ma;
> + u8 bulk_reg[2];
> +
> + /* Get initial plug state */
> + regmap_read(rk808->regmap, RK817_SYS_STS, &tmp);
> + charger->plugged_in = (tmp & RK817_PLUG_IN_STS);
> +
> + /* Turn on all ADC functions to measure battery, USB, and sys voltage,
> + * as well as batt temp. Note only tested implementation so far does
> + * not use a battery with a thermistor.
> + */
> + regmap_write(rk808->regmap, RK817_GAS_GAUGE_ADC_CONFIG0, 0xfc);
> +
> + /* Set relax mode voltage sampling interval and ADC offset calibration
> + * interval to 8 minutes to mirror BSP kernel. Set voltage and current
> + * modes to average to mirror BSP kernel.
> + */
> + regmap_write(rk808->regmap, RK817_GAS_GAUGE_GG_CON, 0x04);
> +
> + /* Write relax threshold, derived from sleep enter current. */
> + tmp = CURRENT_TO_ADC(charger->sleep_enter_current, charger->res_div);
> + put_unaligned_be16(tmp, bulk_reg);
> + regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_RELAX_THRE_H,
> + bulk_reg, 2);
> +
> + /* Write sleep sample current, derived from sleep filter current. */
> + tmp = CURRENT_TO_ADC(charger->sleep_filter_current, charger->res_div);
> + put_unaligned_be16(tmp, bulk_reg);
> + regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_SLEEP_CON_SAMP_CUR_H,
> + bulk_reg, 2);
> +
> + /* Restart battery relax voltage */
> + regmap_write_bits(rk808->regmap, RK817_GAS_GAUGE_GG_STS,
> + RK817_RELAX_VOL_UPD, (0x0 << 2));
> +
> + /* Set OCV Threshold Voltage to 127.5mV. This was hard coded like this
> + * in the BSP.
> + */
> + regmap_write(rk808->regmap, RK817_GAS_GAUGE_OCV_THRE_VOL, 0xff);
> +
> + /* Set maximum charging voltage to battery max voltage. Trying to be
> + * incredibly safe with these value, as setting them wrong could
> + * overcharge the battery, which would be very bad.
> + */
> + max_chg_vol_mv = bat_info->constant_charge_voltage_max_uv / 1000;
> + max_chg_cur_ma = bat_info->constant_charge_current_max_ua / 1000;
> +
> + if (max_chg_vol_mv < 4100) {
> + return dev_err_probe(charger->dev, -EINVAL,
> + "invalid max charger voltage, value %u unsupported\n",
> + max_chg_vol_mv * 1000);
> + }
> + if (max_chg_vol_mv > 4450) {
> + dev_info(charger->dev,
> + "Setting max charge voltage to 4450000uv\n");
> + max_chg_vol_mv = 4450;
> + }
> +
> + if (max_chg_cur_ma < 500) {
> + return dev_err_probe(charger->dev, -EINVAL,
> + "invalid max charger current, value %u unsupported\n",
> + max_chg_cur_ma * 1000);
> + }
> + if (max_chg_cur_ma > 3500)
> + dev_info(charger->dev,
> + "Setting max charge current to 3500000ua\n");
> +
> + /* Now that the values are sanity checked, if we subtract 4100 from the
> + * max voltage and divide by 50, we conviently get the exact value for
> + * the registers, which are 4.1v, 4.15v, 4.2v, 4.25v, 4.3v, 4.35v,
> + * 4.4v, and 4.45v; these correspond to values 0x00 through 0x07.
> + */
> + max_chg_vol_reg = (max_chg_vol_mv - 4100) / 50;
> +
> + max_chg_cur_reg = rk817_chg_cur_to_reg(max_chg_cur_ma);
> +
> + if (max_chg_vol_reg < 0 || max_chg_vol_reg > 7) {
> + return dev_err_probe(charger->dev, -EINVAL,
> + "invalid max charger voltage, value %u unsupported\n",
> + max_chg_vol_mv * 1000);
> + }
> + if (max_chg_cur_reg < 0 || max_chg_cur_reg > 7) {
> + return dev_err_probe(charger->dev, -EINVAL,
> + "invalid max charger current, value %u unsupported\n",
> + max_chg_cur_ma * 1000);
> + }
> +
> + /* Write the values to the registers, and deliver an emergency warning
> + * in the event they are not written correctly.
> + */
> + ret = regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_OUT,
> + RK817_CHRG_VOL_SEL, (max_chg_vol_reg << 4));
> + if (ret) {
> + dev_emerg(charger->dev,
> + "Danger, unable to set max charger voltage: %u\n",
> + ret);
> + }
> +
> + ret = regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_OUT,
> + RK817_CHRG_CUR_SEL, max_chg_cur_reg);
> + if (ret) {
> + dev_emerg(charger->dev,
> + "Danger, unable to set max charger current: %u\n",
> + ret);
> + }
> +
> + /* Set charge finishing mode to analog */
> + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_TERM,
> + RK817_CHRG_TERM_ANA_DIG, (0x0 << 2));
> +
> + /* Set charge finish current, warn if value not in range and keep
> + * default.
> + */
> + chg_term_ma = bat_info->charge_term_current_ua / 1000;
> + if (chg_term_ma < 150 || chg_term_ma > 400) {
> + dev_warn(charger->dev,
> + "Invalid charge termination value %u, keeping default\n",
> + chg_term_ma * 1000);
> + chg_term_ma = 200;
> + }
> +
> + /* Values of 150ma, 200ma, 300ma, and 400ma correspond to 00, 01, 10,
> + * and 11.
> + */
> + chg_term_i_reg = (chg_term_ma - 100) / 100;
> + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_TERM,
> + RK817_CHRG_TERM_ANA_SEL, chg_term_i_reg);
> +
> + ret = rk817_read_or_set_full_charge_on_boot(charger, bat_info);
> + if (ret < 0)
> + return ret;
> +
> + /* Set minimum USB input voltage to 4.5v and enable USB voltage input
> + * limit.
> + */
> + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN,
> + RK817_USB_VLIM_SEL, (0x05 << 4));
> + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_VLIM_EN,
> + (0x01 << 7));
> +
> + /* Set average USB input current limit to 1.5A and enable USB current
> + * input limit.
> + */
> + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN,
> + RK817_USB_ILIM_SEL, 0x03);
> + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_ILIM_EN,
> + (0x01 << 3));
> +
> + return 0;
> +}
> +
> +static int rk817_charger_probe(struct platform_device *pdev)
> +{
> + struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
> + struct rk817_charger *charger;
> + struct device_node *node;
> + struct power_supply_battery_info bat_info = { };
> + struct device *dev = &pdev->dev;
> + struct power_supply_config pscfg = {};
> + int plugin_irq, plugout_irq;
> + int of_value;
> + int ret;
> +
> + node = of_get_child_by_name(dev->parent->of_node, "battery");
> + if (!node)
> + return -ENODEV;
> +
> + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
> + if (!charger)
> + return -ENOMEM;
> +
> + charger->rk808 = rk808;
> +
> + charger->dev = &pdev->dev;
> + platform_set_drvdata(pdev, charger);
> +
> + rk817_bat_calib_vol(charger);
> +
> + pscfg.drv_data = charger;
> + pscfg.of_node = node;
> +
> + /* Get sample resistor value. Note only values of 10000 or 20000
> + * microohms are allowed. Schematic for my test implementation (an
> + * Odroid Go Advance) shows a 10 milliohm resistor for reference.
> + */
> + ret = of_property_read_u32(node, "rockchip,resistor-sense-micro-ohms",
> + &of_value);
> + if (ret < 0) {
> + return dev_err_probe(dev, ret,
> + "Error reading sample resistor value\n");
> + }
> + /* Store as a 1 or a 2, since all we really use the value for is as a
> + * divisor in some calculations.
> + */
> + charger->res_div = (of_value == 20000) ? 2 : 1;
> +
> + /* Get sleep enter current value. Not sure what this value is for
> + * other than to help calibrate the relax threshold.
> + */
> + ret = of_property_read_u32(node,
> + "rockchip,sleep-enter-current-microamp",
> + &of_value);
> + if (ret < 0) {
> + return dev_err_probe(dev, ret,
> + "Error reading sleep enter cur value\n");
> + }
> + charger->sleep_enter_current = of_value;
> +
> + /* Get sleep filter current value */
> + ret = of_property_read_u32(node,
> + "rockchip,sleep-filter-current-microamp",
> + &of_value);
> + if (ret < 0) {
> + return dev_err_probe(dev, ret,
> + "Error reading sleep filter cur value\n");
> + }
> +
> + charger->sleep_filter_current = of_value;
> +
> + charger->bat_ps = devm_power_supply_register(&pdev->dev,
> + &rk817_bat_desc, &pscfg);
> +
> + charger->chg_ps = devm_power_supply_register(&pdev->dev,
> + &rk817_chg_desc, &pscfg);
> +
> + if (IS_ERR(charger->chg_ps))
> + return dev_err_probe(dev, -EINVAL,
> + "Battery failed to probe\n");
> +
> + if (IS_ERR(charger->chg_ps))
> + return dev_err_probe(dev, -EINVAL,
> + "Charger failed to probe\n");
> +
> + ret = power_supply_get_battery_info(charger->bat_ps,
> + &bat_info);
> + if (ret) {
> + return dev_err_probe(dev, ret,
> + "Unable to get battery info: %d\n", ret);
> + }
> +
> + if ((!bat_info.charge_full_design_uah) ||
> + (!bat_info.voltage_min_design_uv) ||
> + (!bat_info.voltage_max_design_uv) ||
> + (!bat_info.constant_charge_voltage_max_uv) ||
> + (!bat_info.constant_charge_current_max_ua) ||
> + (!bat_info.charge_term_current_ua)) {
> + return dev_err_probe(dev, -EINVAL,
> + "Required battery info missing.\n");
> + }
> +
> + charger->bat_charge_full_design_uah = bat_info.charge_full_design_uah;
> + charger->bat_voltage_min_design_uv = bat_info.voltage_min_design_uv;
> + charger->bat_voltage_max_design_uv = bat_info.voltage_max_design_uv;
> +
> + /* Has to run after power_supply_get_battery_info as it depends on some
> + * values discovered from that routine.
> + */
> + ret = rk817_battery_init(charger, &bat_info);
> + if (ret)
> + return ret;
> +
> + power_supply_put_battery_info(charger->bat_ps, &bat_info);
> +
> + plugin_irq = platform_get_irq(pdev, 0);
> + if (plugin_irq < 0)
> + return plugin_irq;
> +
> + plugout_irq = platform_get_irq(pdev, 1);
> + if (plugout_irq < 0)
> + return plugout_irq;
> +
> + ret = devm_request_threaded_irq(charger->dev, plugin_irq, NULL,
> + rk817_plug_in_isr,
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + "rk817_plug_in", charger);
> + if (ret) {
> + return dev_err_probe(&pdev->dev, ret,
> + "plug_in_irq request failed!\n");
> + }
> +
> + ret = devm_request_threaded_irq(charger->dev, plugout_irq, NULL,
> + rk817_plug_out_isr,
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + "rk817_plug_out", charger);
> + if (ret) {
> + return dev_err_probe(&pdev->dev, ret,
> + "plug_out_irq request failed!\n");
> + }
> +
> + return 0;
> +}
> +
> +
> +static struct platform_driver rk817_charger_driver = {
> + .probe = rk817_charger_probe,
> + .driver = {
> + .name = "rk817-charger",
> + },
> +};
> +module_platform_driver(rk817_charger_driver);
> +
> +MODULE_DESCRIPTION("Battery power supply driver for RK817 PMIC");
> +MODULE_AUTHOR("Maya Matuszczyk <maccraft123mc at gmail.com>");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20211013/e02f4584/attachment-0001.sig>
More information about the Linux-rockchip
mailing list