[PATCH] regulator: fan53555: add back tcs4526

[Rudi Heitbaum]

For rk3399pro boards the tcs4526 regulator supports the vdd_gpu
regulator. The tcs4526 regulator has a chip id of <0>.
Add the compatibile tcs,tcs4526  

without this patch, the dmesg output is:
  fan53555-regulator 0-0010: Chip ID 0 not supported!
  fan53555-regulator 0-0010: Failed to setup device!
  fan53555-regulator: probe of 0-0010 failed with error -22
with this patch, the dmesg output is:
  vdd_gpu: supplied by vcc5v0_sys

The regulators are described as:
- Dedicated power management IC TCS4525
- Lithium battery protection chip TCS4526

This has been tested with a Radxa Rock Pi N10.

Fixes: f9028dcdf589 ("regulator: fan53555: only bind tcs4525 to correct chip id")
Signed-off-by: Rudi Heitbaum <rudi at heitbaum.com>
---
 drivers/regulator/fan53555.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 2695be617373..ddab9359ea20 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -90,6 +90,7 @@ enum {
 };
 
 enum {
+	TCS4525_CHIP_ID_00 = 0,
 	TCS4525_CHIP_ID_12 = 12,
 };
 
@@ -373,6 +374,7 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
 static int fan53526_voltages_setup_tcs(struct fan53555_device_info *di)
 {
 	switch (di->chip_id) {
+	case TCS4525_CHIP_ID_00:
 	case TCS4525_CHIP_ID_12:
 		di->slew_reg = TCS4525_TIME;
 		di->slew_mask = TCS_SLEW_MASK;
@@ -564,6 +566,9 @@ static const struct of_device_id __maybe_unused fan53555_dt_ids[] = {
 	}, {
 		.compatible = "tcs,tcs4525",
 		.data = (void *)FAN53526_VENDOR_TCS
+	}, {
+		.compatible = "tcs,tcs4526",
+		.data = (void *)FAN53526_VENDOR_TCS
 	},
 	{ }
 };
@@ -672,6 +677,9 @@ static const struct i2c_device_id fan53555_id[] = {
 	}, {
 		.name = "tcs4525",
 		.driver_data = FAN53526_VENDOR_TCS
+	}, {
+		.name = "tcs4526",
+		.driver_data = FAN53526_VENDOR_TCS
 	},
 	{ },
 };
-- 
2.29.2