[RFC v4 4/8] clk: rockchip: Add support for hclk_sfc on rk3036

Chris Morgan macroalpha82 at gmail.com
Fri Jun 4 08:10:51 PDT 2021


From: Chris Morgan <macromorgan at hotmail.com>

Add support for the bus clock for the serial flash controller on the
rk3036. Taken from the Rockchip BSP kernel but not tested on real
hardware (as I lack a 3036 based SoC to test).

Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
 drivers/clk/rockchip/clk-rk3036.c      | 2 +-
 include/dt-bindings/clock/rk3036-cru.h | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index 91d56ad45817..ebb628733f6d 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -403,7 +403,7 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 	GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 13, GFLAGS),
 	GATE(HCLK_OTG1, "hclk_otg1", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 3, GFLAGS),
 	GATE(HCLK_I2S, "hclk_i2s", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 2, GFLAGS),
-	GATE(0, "hclk_sfc", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS),
+	GATE(HCLK_SFC, "hclk_sfc", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS),
 	GATE(HCLK_MAC, "hclk_mac", "hclk_peri", 0, RK2928_CLKGATE_CON(3), 5, GFLAGS),
 
 	/* pclk_peri gates */
diff --git a/include/dt-bindings/clock/rk3036-cru.h b/include/dt-bindings/clock/rk3036-cru.h
index 35a5a01f9697..a96a9870ad59 100644
--- a/include/dt-bindings/clock/rk3036-cru.h
+++ b/include/dt-bindings/clock/rk3036-cru.h
@@ -81,6 +81,7 @@
 #define HCLK_OTG0		449
 #define HCLK_OTG1		450
 #define HCLK_NANDC		453
+#define HCLK_SFC		454
 #define HCLK_SDMMC		456
 #define HCLK_SDIO		457
 #define HCLK_EMMC		459
-- 
2.25.1




More information about the Linux-rockchip mailing list