[PATCH v12 0/9] Add HANTRO G2/HEVC decoder support for IMX8MQ
Hans Verkuil
hverkuil at xs4all.nl
Thu Jun 3 02:19:11 PDT 2021
Hi Benjamin,
On 26/05/2021 14:45, Benjamin Gaignard wrote:
> The IMX8MQ got two VPUs but until now only G1 has been enabled.
> This series aim to add the second VPU (aka G2) and provide basic
> HEVC decoding support.
>
> To be able to decode HEVC it is needed to add/update some of the
> structures in the uapi. In addition of them one HANTRO dedicated
> control is required to inform the driver of the number of bits to skip
> at the beginning of the slice header.
> The hardware require to allocate few auxiliary buffers to store the
> references frame or tile size data.
>
> The driver has been tested with fluster test suite stream.
> For example with this command: ./fluster.py run -ts JCT-VC-HEVC_V1 -d GStreamer-H.265-V4L2SL-Gst1.0
>
> version 12:
> - Change macro to avoid the final ';'
> - Made arrays static and const
> - Distinguish G2 generic fields (i.e these who could be reused for VP9)
> from HEVC dedicated fields.
I ran the latest checkpatch/smatch/sparse etc. over this series and got a lot
of issues.
The trickiest first:
I get many reports for the register definitions in hantro_g2_regs.h:
drivers/staging/media/hantro/hantro_g2_regs.h:16:33: warning: 'g2_strm_start_offset' defined but not used [-Wunused-const-variable=]
I think it is a bad idea to declare variables in a header, and that's really
what is causing this.
I think it should be possible to rework this to defines such as:
#define G2_DEC_REG(b, s, m) \
(const struct hantro_reg) { \
.base = G2_SWREG(b), \
.shift = s, \
.mask = m, \
}
#define g2_strm_start_offset G2_DEC_REG(259, 0, 0xffffffff)
This allows you to do:
hantro_reg_write(vpu, &g2_strm_start_offset, 0);
without having to declare static variables in a header.
Other warnings:
>From the compiler:
linux-git-arm-multi: WARNINGS
drivers/staging/media/hantro/hantro_g2_hevc_dec.c: In function 'hantro_write_addr':
drivers/staging/media/hantro/hantro_g2_hevc_dec.c:23:24: warning: right shift count >= width of type [-Wshift-count-overflow]
23 | vdpu_write(vpu, (addr >> 32) & 0xffffffff, offset + 4);
| ^~
Note: this builds on a 32-bit arm!
>From smatch:
drivers/staging/media/hantro/hantro_hevc.c:228 tile_buffer_reallocate() error: double free of 'hevc_dec->tile_sao.cpu'
drivers/staging/media/hantro/hantro_hevc.c:234 tile_buffer_reallocate() error: double free of 'hevc_dec->tile_bsd.cpu'
>From kerneldoc:
drivers/staging/media/hantro/hantro_hw.h:136: warning: Function parameter or member 'ref_bufs' not described in 'hantro_hevc_dec_hw_ctx'
drivers/staging/media/hantro/hantro_hw.h:136: warning: Function parameter or member 'ref_bufs_poc' not described in 'hantro_hevc_dec_hw_ctx'
drivers/staging/media/hantro/hantro_hw.h:136: warning: Function parameter or member 'ref_bufs_used' not described in 'hantro_hevc_dec_hw_ctx'
drivers/staging/media/hantro/hantro_hw.h:136: warning: Function parameter or member 'num_tile_cols_allocated' not described in
'hantro_hevc_dec_hw_ctx'
Regards,
Hans
>
> version 11:
> - Rebased on media_stage.
> - Fix minor typo/remarks.
>
> version 10:
> - Shorter version of the previous series without ctrl block patches
> and no DT modifications.
> The scope of this series is limited to HEVC support.
>
> version 9:
> - Corrections in commits messages.
> - Define the dedicated control in hevc-controls.h
> - Add note in documentation.
> - Change max value of the dedicated control.
> - Rebased on media_tree/master branch.
>
> version 8:
> - Add reviewed-by and ack-by tags
> - Fix the warnings reported by kernel test robot
> - Only patch 9 (adding dedicated control), patch 11 (HEVC support) and
> patch 13 (DT changes) are still missing of review/ack tag.
>
> version 7:
> - Remove 'q' from syscon phandle name to make usable for iMX8MM too.
> Update the bindings documentation.
> - Add review/ack tags.
> - Rebase on top of media_tree/master
> - Be more accurate when computing the size of the memory needed motion
> vectors.
> - Explain why the all clocks need to set in the both DT node.
>
> version 6:
> - fix the errors reported by kernel test robot
>
> version 5:
> - use syscon instead of VPU reset driver.
> - Do not break kernel/DT backward compatibility.
> - Add documentation for dedicated Hantro control.
> - Fix the remarks done by Ezequeil (typo, comments, unused function)
> - Run v4l2-compliance without errors (see below).
> - Do not add field to distinguish version, check postproc reg instead
>
> version 4:
> - Split the changes in hevc controls in 2 commits to make them easier to
> review.
> - Change hantro_codec_ops run() prototype to return errors
> - Hantro v4l2 dedicated control is now only an integer
> - rebase on top of VPU reset changes posted here:
> https://www.spinics.net/lists/arm-kernel/msg878440.html
> - Various fix from previous remarks
> - Limit the modifications in API to what the driver needs
>
> version 3:
> - Fix typo in Hantro v4l2 dedicated control
> - Add documentation for the new structures and fields
> - Rebased on top of media_tree for-linus-5.12-rc1 tag
>
> version 2:
> - remove all change related to scaling
> - squash commits to a coherent split
> - be more verbose about the added fields
> - fix the comments done by Ezequiel about dma_alloc_coherent usage
> - fix Dan's comments about control copy, reverse the test logic
> in tile_buffer_reallocate, rework some goto and return cases.
> - be more verbose about why I change the bindings
> - remove all sign-off expect mime since it is confusing
> - remove useless clocks in VPUs nodes
>
> Benjamin Gaignard (9):
> media: hevc: Add fields and flags for hevc PPS
> media: hevc: Add decode params control
> media: hantro: change hantro_codec_ops run prototype to return errors
> media: hantro: Define HEVC codec profiles and supported features
> media: hantro: Only use postproc when post processed formats are
> defined
> media: uapi: Add a control for HANTRO driver
> media: hantro: handle V4L2_PIX_FMT_HEVC_SLICE control
> media: hantro: Introduce G2/HEVC decoder
> media: hantro: IMX8M: add variant for G2/HEVC codec
>
> .../userspace-api/media/drivers/hantro.rst | 19 +
> .../userspace-api/media/drivers/index.rst | 1 +
> .../media/v4l/ext-ctrls-codec.rst | 108 +++-
> .../media/v4l/vidioc-queryctrl.rst | 6 +
> drivers/media/v4l2-core/v4l2-ctrls-core.c | 21 +-
> drivers/media/v4l2-core/v4l2-ctrls-defs.c | 4 +
> drivers/staging/media/hantro/Makefile | 2 +
> drivers/staging/media/hantro/hantro.h | 13 +-
> drivers/staging/media/hantro/hantro_drv.c | 99 ++-
> .../staging/media/hantro/hantro_g1_h264_dec.c | 10 +-
> .../media/hantro/hantro_g1_mpeg2_dec.c | 4 +-
> .../staging/media/hantro/hantro_g1_vp8_dec.c | 6 +-
> .../staging/media/hantro/hantro_g2_hevc_dec.c | 587 ++++++++++++++++++
> drivers/staging/media/hantro/hantro_g2_regs.h | 206 ++++++
> .../staging/media/hantro/hantro_h1_jpeg_enc.c | 4 +-
> drivers/staging/media/hantro/hantro_hevc.c | 327 ++++++++++
> drivers/staging/media/hantro/hantro_hw.h | 69 +-
> .../staging/media/hantro/hantro_postproc.c | 14 +
> drivers/staging/media/hantro/hantro_v4l2.c | 5 +-
> drivers/staging/media/hantro/imx8m_vpu_hw.c | 96 ++-
> .../media/hantro/rk3399_vpu_hw_jpeg_enc.c | 4 +-
> .../media/hantro/rk3399_vpu_hw_mpeg2_dec.c | 4 +-
> .../media/hantro/rk3399_vpu_hw_vp8_dec.c | 6 +-
> drivers/staging/media/sunxi/cedrus/cedrus.c | 6 +
> drivers/staging/media/sunxi/cedrus/cedrus.h | 1 +
> .../staging/media/sunxi/cedrus/cedrus_dec.c | 2 +
> .../staging/media/sunxi/cedrus/cedrus_h265.c | 12 +-
> include/media/hevc-ctrls.h | 46 +-
> 28 files changed, 1613 insertions(+), 69 deletions(-)
> create mode 100644 Documentation/userspace-api/media/drivers/hantro.rst
> create mode 100644 drivers/staging/media/hantro/hantro_g2_hevc_dec.c
> create mode 100644 drivers/staging/media/hantro/hantro_g2_regs.h
> create mode 100644 drivers/staging/media/hantro/hantro_hevc.c
>
More information about the Linux-rockchip
mailing list