[PATCH 7/9] arm64: dts: rockchip: adjust rk3568 pll clocks

[Peter Geis]

The rk3568 gpll should run at 1200mhz and the ppll should run at 200mhz.
These are set incorrectly by the bootloader, so fix them here.

Signed-off-by: Peter Geis <pgwipeout at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 8ba0516eedd8..91ae3c541c1a 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -230,6 +230,8 @@ cru: clock-controller at fdd20000 {
 		rockchip,grf = <&grf>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>;
+		assigned-clock-rates = <1200000000>, <200000000>;
 	};
 
 	i2c0: i2c at fdd40000 {
-- 
2.25.1