[PATCH] arm64: dts: rockchip: r4s: add i2c2 read eeprom for mac addr and fix voltage layout.
xiaobo
peterwillcn at gmail.com
Sun Jul 4 18:04:24 PDT 2021
1. add i2c2 read eeprom for mac addr
2. fix voltage layout.
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Signed-off-by: xiaobo <peterwillcn at gmail.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 2 +-
.../boot/dts/rockchip/rk3399-nanopi-r4s.dts | 138 ++++++++++--------
2 files changed, 78 insertions(+), 62 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index c3e00c0e2db7..6973141cb7a3 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -9,7 +9,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
@@ -36,6 +35,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
index fa5809887643..4dc6a80e8494 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
@@ -1,15 +1,13 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * FriendlyElec NanoPC-T4 board device tree source
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
*
- * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd.
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
* (http://www.friendlyarm.com)
*
* Copyright (c) 2018 Collabora Ltd.
- *
- * Copyright (c) 2020 Jensen Huang <jensenhuang at friendlyarm.com>
- * Copyright (c) 2020 Marty Jones <mj8263788 at gmail.com>
- * Copyright (c) 2021 Tianling Shen <cnsztl at gmail.com>
+ * Copyright (c) 2019 Arm Ltd.
+ * Copyright (C) 2020 Xiaobo <peterwillcn at gmail.com>
*/
/dts-v1/;
@@ -19,48 +17,59 @@ / {
model = "FriendlyElec NanoPi R4S";
compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
- /delete-node/ display-subsystem;
-
- gpio-leds {
- pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
-
- /delete-node/ led-0;
-
- lan_led: led-lan {
- gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
- label = "green:lan";
- };
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
- sys_led: led-sys {
- gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
- label = "red:sys";
- default-state = "on";
- };
+ /delete-node/ display-subsystem;
- wan_led: led-wan {
- gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
- label = "green:wan";
- };
+ vcc1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8_s3";
+ vin-supply = <&vcc_1v8>;
};
- gpio-keys {
- pinctrl-0 = <&reset_button_pin>;
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwr_h>;
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc3v0_sd";
+ vin-supply = <&vcc3v3_sys>;
+ };
- /delete-node/ power;
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3_sys";
+ };
- reset {
- debounce-interval = <50>;
- gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
- label = "reset";
- linux,code = <KEY_RESTART>;
- };
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc5v0_sys";
+ vin-supply = <&vdd_5v>;
};
vdd_5v: vdd-5v {
compatible = "regulator-fixed";
- regulator-name = "vdd_5v";
regulator-always-on;
regulator-boot-on;
+ regulator-name = "vdd_5v";
};
};
@@ -68,40 +77,51 @@ &emmc_phy {
status = "disabled";
};
+&fusb0 {
+ status = "disabled";
+};
+
+&i2c2 {
+ eeprom at 51 {
+ compatible = "microchip,24c02", "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ read-only;
+ };
+};
+
&i2c4 {
status = "disabled";
};
-&pcie0 {
- max-link-speed = <1>;
- num-lanes = <1>;
- vpcie3v3-supply = <&vcc3v3_sys>;
+&leds {
+ lan_led: led-1 {
+ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+ label = "green:lan";
+ };
+
+ wan_led: led-2 {
+ gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+ label = "green:wan";
+ };
};
&pinctrl {
gpio-leds {
- /delete-node/ status-led-pin;
-
lan_led_pin: lan-led-pin {
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
- sys_led_pin: sys-led-pin {
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
wan_led_pin: wan-led-pin {
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+};
- rockchip-key {
- /delete-node/ power-key;
-
- reset_button_pin: reset-button-pin {
- rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
+&pcie0 {
+ max-link-speed = <1>;
+ num-lanes = <1>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
};
&sdhci {
@@ -112,6 +132,10 @@ &sdio0 {
status = "disabled";
};
+&sdmmc {
+ host-index-min = <1>;
+};
+
&u2phy0_host {
phy-supply = <&vdd_5v>;
};
@@ -120,14 +144,6 @@ &u2phy1_host {
status = "disabled";
};
-&uart0 {
- status = "disabled";
-};
-
&usbdrd_dwc3_0 {
dr_mode = "host";
};
-
-&vcc3v3_sys {
- vin-supply = <&vcc5v0_sys>;
-};
--
2.32.0
More information about the Linux-rockchip
mailing list