[PATCH v3 1/9] media: hevc: Modify structures to follow H265 ITU spec

Jernej Škrabec jernej.skrabec at siol.net
Thu Feb 25 12:01:14 EST 2021


Hi Ezequiel,

Dne četrtek, 25. februar 2021 ob 14:09:52 CET je Ezequiel Garcia napisal(a):
> Hi Benjamin,
> 
> Thanks for the good work.
> 
> On Mon, 2021-02-22 at 13:23 +0100, Benjamin Gaignard wrote:
> > The H.265 ITU specification (section 7.4) define the general
> > slice segment header semantics.
> > Modified/added fields are:
> > - video_parameter_set_id: (7.4.3.1) identifies the VPS for
> > reference by other syntax elements.
> > - seq_parameter_set_id: (7.4.3.2.1) specifies the value of
> > the vps_video_parameter_set_id of the active VPS.
> > - chroma_format_idc: (7.4.3.2.1) specifies the chroma sampling
> >  relative to the luma sampling
> > - pic_parameter_set_id: (7.4.3.3.1) identifies the PPS for
> > reference by other syntax elements
> > - num_ref_idx_l0_default_active_minus1: (7.4.3.3.1) specifies
> > the inferred value of num_ref_idx_l0_active_minus1
> > - num_ref_idx_l1_default_active_minus1: (7.4.3.3.1) specifies
> > the inferred value of num_ref_idx_l1_active_minus1
> > - slice_segment_addr: (7.4.7.1) specifies the address of
> > the first coding tree block in the slice segment
> > - num_entry_point_offsets: (7.4.7.1) specifies the number of
> > entry_point_offset_minus1[ i ] syntax elements in the slice header
> > 
> > Add HEVC decode params contains the information used in section
> > "8.3 Slice decoding process" of the specification to let the hardware
> > perform decoding of a slices.
> > 
> > Adapt Cedrus driver according to these changes.
> > 
> > Signed-off-by: Benjamin Gaignard <benjamin.gaignard at collabora.com>
> > ---
> > version 3:
> > - Add documentation about the new structuers and fields.
> > 
> > version 2:
> > - remove all change related to scaling
> > - squash commits to a coherent split
> > - be more verbose about the added fields
> > 
> >  .../media/v4l/ext-ctrls-codec.rst             | 126 +++++++++++++++---
> >  .../media/v4l/vidioc-queryctrl.rst            |   6 +
> >  drivers/media/v4l2-core/v4l2-ctrls.c          |  26 +++-
> >  drivers/staging/media/sunxi/cedrus/cedrus.c   |   6 +
> >  drivers/staging/media/sunxi/cedrus/cedrus.h   |   1 +
> >  .../staging/media/sunxi/cedrus/cedrus_dec.c   |   2 +
> >  .../staging/media/sunxi/cedrus/cedrus_h265.c  |   6 +-
> >  include/media/hevc-ctrls.h                    |  45 +++++--
> >  8 files changed, 186 insertions(+), 32 deletions(-)
> > 
> > diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/
Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> > index 00944e97d638..5e6d77e858c0 100644
> > --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> > +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> > @@ -3109,6 +3109,15 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> >      :stub-columns: 0
> >      :widths:       1 1 2
> >  
> > +    * - __u8
> > +      - ``video_parameter_set_id``
> > +      - Identifies the VPS for reference by other syntax elements
> > +    * - __u8
> > +      - ``seq_parameter_set_id̀``
> > +      - Specifies the value of the vps_video_parameter_set_id of the 
active VPS
> > +    * - __u8
> > +      - ``chroma_format_idc``
> > +      - Specifies the chroma sampling relative to the luma sampling
> 
> None of these fields seem needed for the Hantro G2 driver,
> so I suggest you drop them for now.
> 
> >      * - __u16
> >        - ``pic_width_in_luma_samples``
> >        -
> > @@ -3172,6 +3181,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> >      * - __u8
> >        - ``chroma_format_idc``
> >        -
> > +    * - __u8
> > +      - ``num_slices``
> > +
> 
> Not used, but also doesn't seem part of the SPS syntax. If we have to
> pass the number of slices, we'll need another mechanism.
> 
> >       -
> >      * - __u64
> >        - ``flags``
> >        - See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>`
> > @@ -3231,9 +3243,18 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> >      :stub-columns: 0
> >      :widths:       1 1 2
> >  
> > +    * - __u8
> > +      - ``pic_parameter_set_id``
> > +      - Identifies the PPS for reference by other syntax elements
> 
> Not used.
> 
> >      * - __u8
> >        - ``num_extra_slice_header_bits``
> >        -
> > +    * - __u8
> > +      - ``num_ref_idx_l0_default_active_minus1``
> > +      - Specifies the inferred value of num_ref_idx_l0_active_minus1
> > +    * - __u8
> > +      - ``num_ref_idx_l1_default_active_minus1``
> > +      - Specifies the inferred value of num_ref_idx_l1_active_minus1
> >      * - __s8
> >        - ``init_qp_minus26``
> >        -
> > @@ -3342,6 +3363,12 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> >      * - ``V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT``
> >        - 0x00040000
> >        -
> > +    * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT``
> > +      - 0x00080000
> > +      -
> > +    * - ``V4L2_HEVC_PPS_FLAG_UNIFORM_SPACING``
> > +      - 0x00100000
> > +      -
> >  
> 
> I suggest to do all the PPS control changes in a separate patch,
> feels easier to review and cleaner as you can explain the
> changes with more detail in the commit description.
> 
> Looking at the PPS syntax for tiles, I'm wondering if these
> deserve their own control, which would be used if tiles are enabled,
> i.e. V4L2_HEVC_PPS_FLAG_TILES_ENABLED is set.
> 
>         __u8    num_tile_columns_minus1;                                         
>         __u8    num_tile_rows_minus1;                                            
>         __u8    column_width_minus1[20];                                         
>         __u8    row_height_minus1[22];    
> 
> Not something we necessarily have to tackle now.
> 
> >  ``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (struct)``
> >      Specifies various slice-specific parameters, especially from the NAL 
unit
> > @@ -3366,6 +3393,12 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> >      * - __u32
> >        - ``data_bit_offset``
> >        - Offset (in bits) to the video data in the current slice data.
> > +    * - __u32
> > +      - ``slice_segment_addr``
> > +      - Specifies the address of the first coding tree block in the slice 
segment
> 
> Not used.
> 
> > +    * - __u32
> > +      - ``num_entry_point_offsets``
> > +      - Specifies the number of entry_point_offset_minus1[ i ] syntax 
elements in the slice header
> 
> Not used.

While above two fields may not be used in Hantro, they are for sure useful for 
Cedrus and RPi4. I would like to keep them, otherwise with such approach HEVC 
will stay in staging for a long time. I'm still baffled why scaling matrix 
control was dropped. It would fit well in Cedrus and RPi4 driver and after a 
quick look, it seems that it was used in driver in later patch.

Best regards,
Jernej

> 
> >      * - __u8
> >        - ``nal_unit_type``
> >        -
> > @@ -3422,28 +3455,20 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> >      * - __u8
> >        - ``pic_struct``
> >        -
> > -    * - __u8
> > -      - ``num_active_dpb_entries``
> > -      - The number of entries in ``dpb``.
> 
> Need to explain in the commit description why this field is moved.
> 
> >      * - __u8
> >        - ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> >        - The list of L0 reference elements as indices in the DPB.
> >      * - __u8
> >        - ``ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> >        - The list of L1 reference elements as indices in the DPB.
> > +    * - __u16
> > +      - ``short_term_ref_pic_set_size``
> > +
> 
> Not used.
> 
> >       -
> > +    * - __u16
> > +      - ``long_term_ref_pic_set_size``
> > +      -
> 
> Not used.
> 
> >      * - __u8
> > -      - ``num_rps_poc_st_curr_before``
> > -      - The number of reference pictures in the short-term set that come 
before
> > -        the current frame.
> 
> If this matches NumPocStCurrBefore from section 8.3.2 "Decoding process for 
reference picture set"
> then I would document that. And perhaps rename it to num_poc_st_curr_before.
> 
> > -    * - __u8
> > -      - ``num_rps_poc_st_curr_after``
> > -      - The number of reference pictures in the short-term set that come 
after
> > -        the current frame.
> 
> Ditto.
> 
> > -    * - __u8
> > -      - ``num_rps_poc_lt_curr``
> > -      - The number of reference pictures in the long-term set.
> 
> Ditto.
> 
> Also, I'd like the changes that move fields from 
V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS
> to the new V4L2_CID_MPEG_VIDEO_HEVC_DECODE_PARAMS control, to be in their
> patch.
> 
> That will allow us to put in the commit description a proper
> explanation of why are fields being moved. Nothing fancy, simply
> explaining that these variables come from section 8.3.2
> "Decoding process for reference picture set", which describes
> a process invoked once per picture, so they are not per-slice.
> 
> > -    * - __u8
> > -      - ``padding[7]``
> > +      - ``padding``
> >        - Applications and drivers must set this to zero.
> >      * - struct :c:type:`v4l2_hevc_dpb_entry`
> >        - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> > @@ -3646,3 +3671,74 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> >      so this has to come from client.
> >      This is applicable to H264 and valid Range is from 0 to 63.
> >      Source Rec. ITU-T H.264 (06/2019); G.7.4.1.1, G.8.8.1.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_PARAMS (struct)``
> > +    Specifies various decode parameters, especially the references picture 
order
> > +    count (POC) for all the lists (short, long, before, current, after) 
and the
> > +    number of entries for each of them.
> > +    These parameters are defined according to :ref:`hevc`.
> > +    They are described in section 8.3 "Slice decoding process" of the
> > +    specification.
> > +
> > +.. c:type:: v4l2_ctrl_hevc_decode_params
> > +
> > +.. cssclass:: longtable
> > +
> > +.. flat-table:: struct v4l2_ctrl_hevc_decode_params
> > +    :header-rows:  0
> > +    :stub-columns: 0
> > +    :widths:       1 1 2
> > +
> > +    * - __s32
> > +      - ``pic_order_cnt_val``
> > +      -
> 
> Can be documented as:
> 
> """
> PicOrderCntVal as described in section 8.3.1 "Decoding process
> for picture order count" of the specification.
> """
> 
> Note that snake case is used to match the kernel style,
> but other than that we try to keep the HEVC spec variable
> names.
> 
> > +    * - __u8
> > +      - ``num_active_dpb_entries``
> > +      - The number of entries in ``dpb``.
> > +    * - struct :c:type:`v4l2_hevc_dpb_entry`
> > +      - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> > +      - The decoded picture buffer, for meta-data about reference frames.
> 
> The DPB is here, but it seems it's also in the slice control?
> 
> > +    * - __u8
> > +      - ``num_rps_poc_st_curr_before``
> > +      - The number of reference pictures in the short-term set that come 
before
> > +        the current frame.
> > +    * - __u8
> > +      - ``num_rps_poc_st_curr_after``
> > +      - The number of reference pictures in the short-term set that come 
after
> > +        the current frame.
> > +    * - __u8
> > +      - ``num_rps_poc_lt_curr``
> > +      - The number of reference pictures in the long-term set.
> > +    * - __u8
> > +      - ``rps_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> > +      -
> > +    * - __u8
> > +      - ``rps_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> > +      -
> > +    * - __u8
> > +      - ``rps_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> > +      -
> 
> Could you document these as well?
> 
> Thanks a lot,
> Ezequiel
> 
> 





More information about the Linux-rockchip mailing list