[PATCH V2 06/10] arm64: dts: imx8mq: Enable both G1 and G2 VPU's with vpu-blk-ctrl

Adam Ford aford173 at gmail.com
Thu Dec 16 03:12:51 PST 2021


With the Hantro G1 and G2 now setup to run independently, update
the device tree to allow both to operate.  This requires the
vpu-blk-ctrl node to be configured.  Since vpu-blk-ctrl needs
certain clock enabled to handle the gating of the G1 and G2
fuses, the clock-parents and clock-rates for the various VPU's
to be moved into the pgc_vpu because they cannot get re-parented
once enabled, and the pgc_vpu is the highest in the chain.

Signed-off-by: Adam Ford <aford173 at gmail.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 972766b67a15..5029c121d48b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -711,7 +711,21 @@ pgc_gpu: power-domain at 5 {
 					pgc_vpu: power-domain at 6 {
 						#power-domain-cells = <0>;
 						reg = <IMX8M_POWER_DOMAIN_VPU>;
-						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
+						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>,
+							 <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+							 <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+						assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
+								  <&clk IMX8MQ_CLK_VPU_G2>,
+								  <&clk IMX8MQ_CLK_VPU_BUS>,
+								  <&clk IMX8MQ_VPU_PLL_BYPASS>;
+						assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
+									 <&clk IMX8MQ_VPU_PLL_OUT>,
+									 <&clk IMX8MQ_SYS1_PLL_800M>,
+									 <&clk IMX8MQ_VPU_PLL>;
+						assigned-clock-rates = <600000000>,
+								       <600000000>,
+								       <800000000>,
+								       <0>;
 					};
 
 					pgc_disp: power-domain at 7 {
@@ -1432,30 +1446,31 @@ usb3_phy1: usb-phy at 382f0040 {
 			status = "disabled";
 		};
 
-		vpu: video-codec at 38300000 {
-			compatible = "nxp,imx8mq-vpu";
-			reg = <0x38300000 0x10000>,
-			      <0x38310000 0x10000>,
-			      <0x38320000 0x10000>;
-			reg-names = "g1", "g2", "ctrl";
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "g1", "g2";
+		vpu_g1: video-codec at 38300000 {
+			compatible = "nxp,imx8mq-vpu-g1";
+			reg = <0x38300000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
+			power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
+		};
+
+		vpu_g2: video-codec at 38310000 {
+			compatible = "nxp,imx8mq-vpu-g2";
+			reg = <0x38310000 0x10000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+			power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
+		};
+
+		vpu_blk_ctrl: blk-ctrl at 38320000 {
+			compatible = "fsl,imx8mq-vpu-blk-ctrl";
+			reg = <0x38320000 0x100>;
+			power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
+			power-domain-names = "bus", "g1", "g2";
 			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
-				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
-				 <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
-			clock-names = "g1", "g2", "bus";
-			assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
-					  <&clk IMX8MQ_CLK_VPU_G2>,
-					  <&clk IMX8MQ_CLK_VPU_BUS>,
-					  <&clk IMX8MQ_VPU_PLL_BYPASS>;
-			assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
-						 <&clk IMX8MQ_VPU_PLL_OUT>,
-						 <&clk IMX8MQ_SYS1_PLL_800M>,
-						 <&clk IMX8MQ_VPU_PLL>;
-			assigned-clock-rates = <600000000>, <600000000>,
-					       <800000000>, <0>;
-			power-domains = <&pgc_vpu>;
+				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+			clock-names = "g1", "g2";
+			#power-domain-cells = <1>;
 		};
 
 		pcie0: pcie at 33800000 {
-- 
2.32.0




More information about the Linux-rockchip mailing list