[PATCH v3 2/8] dt-bindings: phy: phy-rockchip-inno-usb2: add rk3568 documentation

[Peter Geis]

The rk3568 usb2phy node is a standalone node with a single muxed
interrupt.
Add documentation for it to phy-rockchip-inno-usb2.

Signed-off-by: Peter Geis <pgwipeout at gmail.com>
---

This was the best solution I've come up with for this.
I avoided creating another binding since this is such a simple change to
the actual driver and would likely require renaming the existing
binding.
I've tested that this correctly flags if the interrupts are missing or
incorrectly assigned on both rk356x and rk3399.

Thank you Johan and Rob for your constructive feedback.

 .../bindings/phy/phy-rockchip-inno-usb2.yaml  | 44 +++++++++++++++++--
 1 file changed, 40 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
index 5bebd86bf8b6..4b75289735eb 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
@@ -18,6 +18,7 @@ properties:
       - rockchip,rk3328-usb2phy
       - rockchip,rk3366-usb2phy
       - rockchip,rk3399-usb2phy
+      - rockchip,rk3568-usb2phy
       - rockchip,rv1108-usb2phy
 
   reg:
@@ -50,6 +51,10 @@ properties:
     description:
       Phandle to the extcon device providing the cable state for the otg phy.
 
+  interrupts:
+    description: Muxed interrupt for both ports
+    maxItems: 1
+
   rockchip,usbgrf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -67,6 +72,7 @@ properties:
 
       interrupts:
         description: host linestate interrupt
+        maxItems: 1
 
       interrupt-names:
         const: linestate
@@ -78,8 +84,6 @@ properties:
 
     required:
       - "#phy-cells"
-      - interrupts
-      - interrupt-names
 
   otg-port:
     type: object
@@ -109,8 +113,6 @@ properties:
 
     required:
       - "#phy-cells"
-      - interrupts
-      - interrupt-names
 
 required:
   - compatible
@@ -120,6 +122,40 @@ required:
   - host-port
   - otg-port
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-usb2phy
+
+    then:
+      properties:
+        host-port:
+          properties:
+            interrupts: false
+
+        otg-port:
+          properties:
+            interrupts: false
+
+      required:
+        - interrupts
+
+    else:
+      properties:
+        interrupts: false
+
+        host-port:
+          required:
+            - interrupts
+            - interrupt-names
+
+        otg-port:
+          required:
+            - interrupts
+            - interrupt-names
+
 additionalProperties: false
 
 examples:
-- 
2.25.1