[PATCH 14/18] arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a

[Sascha Hauer]

From: Michael Riesch <michael.riesch at wolfvision.net>

Enable the RK356x Video Output Processor (VOP) 2 on the Pine64
Quartz64 Model A.

Signed-off-by: Michael Riesch <michael.riesch at wolfvision.net>
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index 4d4b2a301b1a4..ccebd6bb19cea 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3566.dtsi"
 
 / {
@@ -205,6 +206,12 @@ &gmac1m0_clkinout
 	status = "okay";
 };
 
+&hdmi {
+	avdd-0v9-supply = <&vdda_0v9>;
+	avdd-1v8-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -546,3 +553,27 @@ bluetooth {
 &uart2 {
 	status = "okay";
 };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint at 0 {
+		reg = <0>;
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint at RK3568_VOP2_EP_HDMI {
+		reg = <RK3568_VOP2_EP_HDMI>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.30.2