[RFC V2 5/6] media: hantro: split i.MX8MQ G1 and G2 code

Adam Ford aford173 at gmail.com
Mon Dec 6 17:54:44 PST 2021


The VPU in the i.MX8MQ is really the combination of Hantro G1 and
Hantro G2. With the updated vpu-blk-ctrl, the power domains system
can enable and disable them separately as well as pull them out of
reset. This simplifies the code and lets them run independently.

Signed-off-by: Adam Ford <aford173 at gmail.com>

diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index ab2467998d29..d803252a5aba 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -608,8 +608,8 @@ static const struct of_device_id of_hantro_match[] = {
 	{ .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, },
 #endif
 #ifdef CONFIG_VIDEO_HANTRO_IMX8M
-	{ .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
-	{ .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant },
+	{ .compatible = "nxp,imx8mq-vpu-g1", .data = &imx8mq_vpu_g1_variant, },
+	{ .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant, },
 #endif
 #ifdef CONFIG_VIDEO_HANTRO_SAMA5D4
 	{ .compatible = "microchip,sama5d4-vdec", .data = &sama5d4_vdec_variant, },
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index cff817ca8d22..122b83a16663 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -299,8 +299,8 @@ enum hantro_enc_fmt {
 	ROCKCHIP_VPU_ENC_FMT_UYVY422 = 3,
 };
 
+extern const struct hantro_variant imx8mq_vpu_g1_variant;
 extern const struct hantro_variant imx8mq_vpu_g2_variant;
-extern const struct hantro_variant imx8mq_vpu_variant;
 extern const struct hantro_variant px30_vpu_variant;
 extern const struct hantro_variant rk3036_vpu_variant;
 extern const struct hantro_variant rk3066_vpu_variant;
diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
index 1a43f6fceef9..c9f6e8472258 100644
--- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
+++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
@@ -13,67 +13,6 @@
 #include "hantro_g1_regs.h"
 #include "hantro_g2_regs.h"
 
-#define CTRL_SOFT_RESET		0x00
-#define RESET_G1		BIT(1)
-#define RESET_G2		BIT(0)
-
-#define CTRL_CLOCK_ENABLE	0x04
-#define CLOCK_G1		BIT(1)
-#define CLOCK_G2		BIT(0)
-
-#define CTRL_G1_DEC_FUSE	0x08
-#define CTRL_G1_PP_FUSE		0x0c
-#define CTRL_G2_DEC_FUSE	0x10
-
-static void imx8m_soft_reset(struct hantro_dev *vpu, u32 reset_bits)
-{
-	u32 val;
-
-	/* Assert */
-	val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
-	val &= ~reset_bits;
-	writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
-
-	udelay(2);
-
-	/* Release */
-	val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
-	val |= reset_bits;
-	writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
-}
-
-static void imx8m_clk_enable(struct hantro_dev *vpu, u32 clock_bits)
-{
-	u32 val;
-
-	val = readl(vpu->ctrl_base + CTRL_CLOCK_ENABLE);
-	val |= clock_bits;
-	writel(val, vpu->ctrl_base + CTRL_CLOCK_ENABLE);
-}
-
-static int imx8mq_runtime_resume(struct hantro_dev *vpu)
-{
-	int ret;
-
-	ret = clk_bulk_prepare_enable(vpu->variant->num_clocks, vpu->clocks);
-	if (ret) {
-		dev_err(vpu->dev, "Failed to enable clocks\n");
-		return ret;
-	}
-
-	imx8m_soft_reset(vpu, RESET_G1 | RESET_G2);
-	imx8m_clk_enable(vpu, CLOCK_G1 | CLOCK_G2);
-
-	/* Set values of the fuse registers */
-	writel(0xffffffff, vpu->ctrl_base + CTRL_G1_DEC_FUSE);
-	writel(0xffffffff, vpu->ctrl_base + CTRL_G1_PP_FUSE);
-	writel(0xffffffff, vpu->ctrl_base + CTRL_G2_DEC_FUSE);
-
-	clk_bulk_disable_unprepare(vpu->variant->num_clocks, vpu->clocks);
-
-	return 0;
-}
-
 /*
  * Supported formats.
  */
@@ -209,27 +148,6 @@ static irqreturn_t imx8m_vpu_g2_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int imx8mq_vpu_hw_init(struct hantro_dev *vpu)
-{
-	vpu->ctrl_base = vpu->reg_bases[vpu->variant->num_regs - 1];
-
-	return 0;
-}
-
-static void imx8m_vpu_g1_reset(struct hantro_ctx *ctx)
-{
-	struct hantro_dev *vpu = ctx->dev;
-
-	imx8m_soft_reset(vpu, RESET_G1);
-}
-
-static void imx8m_vpu_g2_reset(struct hantro_ctx *ctx)
-{
-	struct hantro_dev *vpu = ctx->dev;
-
-	imx8m_soft_reset(vpu, RESET_G2);
-}
-
 /*
  * Supported codec ops.
  */
@@ -237,19 +155,16 @@ static void imx8m_vpu_g2_reset(struct hantro_ctx *ctx)
 static const struct hantro_codec_ops imx8mq_vpu_codec_ops[] = {
 	[HANTRO_MODE_MPEG2_DEC] = {
 		.run = hantro_g1_mpeg2_dec_run,
-		.reset = imx8m_vpu_g1_reset,
 		.init = hantro_mpeg2_dec_init,
 		.exit = hantro_mpeg2_dec_exit,
 	},
 	[HANTRO_MODE_VP8_DEC] = {
 		.run = hantro_g1_vp8_dec_run,
-		.reset = imx8m_vpu_g1_reset,
 		.init = hantro_vp8_dec_init,
 		.exit = hantro_vp8_dec_exit,
 	},
 	[HANTRO_MODE_H264_DEC] = {
 		.run = hantro_g1_h264_dec_run,
-		.reset = imx8m_vpu_g1_reset,
 		.init = hantro_h264_dec_init,
 		.exit = hantro_h264_dec_exit,
 	},
@@ -258,14 +173,12 @@ static const struct hantro_codec_ops imx8mq_vpu_codec_ops[] = {
 static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = {
 	[HANTRO_MODE_HEVC_DEC] = {
 		.run = hantro_g2_hevc_dec_run,
-		.reset = imx8m_vpu_g2_reset,
 		.init = hantro_hevc_dec_init,
 		.exit = hantro_hevc_dec_exit,
 	},
 	[HANTRO_MODE_VP9_DEC] = {
 		.run = hantro_g2_vp9_dec_run,
 		.done = hantro_g2_vp9_dec_done,
-		.reset = imx8m_vpu_g2_reset,
 		.init = hantro_vp9_dec_init,
 		.exit = hantro_vp9_dec_exit,
 	},
@@ -275,7 +188,7 @@ static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = {
  * VPU variants.
  */
 
-static const struct hantro_irq imx8mq_irqs[] = {
+static const struct hantro_irq imx8mq_g1_irqs[] = {
 	{ "g1", imx8m_vpu_g1_irq },
 };
 
@@ -283,10 +196,12 @@ static const struct hantro_irq imx8mq_g2_irqs[] = {
 	{ "g2", imx8m_vpu_g2_irq },
 };
 
-static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
-static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" };
+static const char * const imx8mq_g1_clk_names[] = { "g1" };
+static const char * const imx8mq_g1_reg_names[] = { "g1" };
+static const char * const imx8mq_g2_clk_names[] = { "g2" };
+static const char * const imx8mq_g2_reg_names[] = { "g2" };
 
-const struct hantro_variant imx8mq_vpu_variant = {
+const struct hantro_variant imx8mq_vpu_g1_variant = {
 	.dec_fmts = imx8m_vpu_dec_fmts,
 	.num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts),
 	.postproc_fmts = imx8m_vpu_postproc_fmts,
@@ -295,14 +210,12 @@ const struct hantro_variant imx8mq_vpu_variant = {
 	.codec = HANTRO_MPEG2_DECODER | HANTRO_VP8_DECODER |
 		 HANTRO_H264_DECODER,
 	.codec_ops = imx8mq_vpu_codec_ops,
-	.init = imx8mq_vpu_hw_init,
-	.runtime_resume = imx8mq_runtime_resume,
-	.irqs = imx8mq_irqs,
-	.num_irqs = ARRAY_SIZE(imx8mq_irqs),
-	.clk_names = imx8mq_clk_names,
-	.num_clocks = ARRAY_SIZE(imx8mq_clk_names),
-	.reg_names = imx8mq_reg_names,
-	.num_regs = ARRAY_SIZE(imx8mq_reg_names)
+	.irqs = imx8mq_g1_irqs,
+	.num_irqs = ARRAY_SIZE(imx8mq_g1_irqs),
+	.clk_names = imx8mq_g1_clk_names,
+	.num_clocks = ARRAY_SIZE(imx8mq_g1_clk_names),
+	.reg_names = imx8mq_g1_reg_names,
+	.num_regs = ARRAY_SIZE(imx8mq_g1_reg_names),
 };
 
 const struct hantro_variant imx8mq_vpu_g2_variant = {
@@ -314,10 +227,10 @@ const struct hantro_variant imx8mq_vpu_g2_variant = {
 	.postproc_ops = &hantro_g2_postproc_ops,
 	.codec = HANTRO_HEVC_DECODER | HANTRO_VP9_DECODER,
 	.codec_ops = imx8mq_vpu_g2_codec_ops,
-	.init = imx8mq_vpu_hw_init,
-	.runtime_resume = imx8mq_runtime_resume,
 	.irqs = imx8mq_g2_irqs,
 	.num_irqs = ARRAY_SIZE(imx8mq_g2_irqs),
-	.clk_names = imx8mq_clk_names,
-	.num_clocks = ARRAY_SIZE(imx8mq_clk_names),
+	.clk_names = imx8mq_g2_clk_names,
+	.num_clocks = ARRAY_SIZE(imx8mq_g2_clk_names),
+	.reg_names = imx8mq_g2_reg_names,
+	.num_regs = ARRAY_SIZE(imx8mq_g2_reg_names),
 };
-- 
2.32.0




More information about the Linux-rockchip mailing list