[PATCH v3 02/14] ASoC: rockchip: i2s: Fixup clk div error

Sugar Zhang sugar.zhang at rock-chips.com
Wed Aug 25 21:01:48 PDT 2021


MCLK maybe not precise as required because of PLL,
but which still can be used and no side effect. so,
using DIV_ROUND_CLOSEST instead div.

e.g.

set mclk to 11289600 Hz, but get 11289598 Hz.

Signed-off-by: Sugar Zhang <sugar.zhang at rock-chips.com>
---

Changes in v3: None
Changes in v2: None

 sound/soc/rockchip/rockchip_i2s.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c
index c9d5c52..05fce2c 100644
--- a/sound/soc/rockchip/rockchip_i2s.c
+++ b/sound/soc/rockchip/rockchip_i2s.c
@@ -280,10 +280,10 @@ static int rockchip_i2s_hw_params(struct snd_pcm_substream *substream,
 	if (i2s->is_master_mode) {
 		mclk_rate = clk_get_rate(i2s->mclk);
 		bclk_rate = i2s->bclk_ratio * params_rate(params);
-		if (bclk_rate == 0 || mclk_rate % bclk_rate)
+		if (!bclk_rate)
 			return -EINVAL;
 
-		div_bclk = mclk_rate / bclk_rate;
+		div_bclk = DIV_ROUND_CLOSEST(mclk_rate, bclk_rate);
 		div_lrck = bclk_rate / params_rate(params);
 		regmap_update_bits(i2s->regmap, I2S_CKR,
 				   I2S_CKR_MDIV_MASK,
-- 
2.7.4






More information about the Linux-rockchip mailing list