[RFC v2 1/4] dt-bindings: Add Rockchip rk817 battery charger support

[Sebastian Reichel]

Hi,

On Mon, Jul 26, 2021 at 02:01:27PM -0500, Chris Morgan wrote:
> From: Chris Morgan <macromorgan at hotmail.com>
> 
> Create dt-binding documentation to document rk817 battery and charger
> usage. New device-tree properties have been added.
> 
> - rockchip,resistor-sense: The value in microohms of the sample
>                            resistor.
> - rockchip,sleep-enter-current: The value in microamps of the sleep
>                                 enter current.
> - rockchip,sleep-filter-current: The value in microamps of the sleep
>                                  filter current.

please use common property units:

https://github.com/devicetree-org/dt-schema/blob/master/schemas/property-units.yaml

-- Sebastian

> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> Signed-off-by: Maya Matuszczyk <maccraft123mc at gmail.com>
> ---
>  .../devicetree/bindings/mfd/rk808.txt         | 35 +++++++++++++++++--
>  1 file changed, 33 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
> index 23a17a6663ec..fa42b6253d26 100644
> --- a/Documentation/devicetree/bindings/mfd/rk808.txt
> +++ b/Documentation/devicetree/bindings/mfd/rk808.txt
> @@ -70,13 +70,37 @@ Optional RK817 properties:
>  
>  - vcc8-supply:  The input supply for BOOST
>  - vcc9-supply:  The input supply for OTG_SWITCH
> +
>  - codec:	The child node for the codec to hold additional properties.
>  		If no additional properties are required for the codec, this
>  		node can be omitted.
> -
> -- rockchip,mic-in-differential: Telling if the microphone uses differential
> +- rockchip,mic-in-differential:	Telling if the microphone uses differential
>  				mode. Should be under the codec child node.
>  
> +- battery:	The child node for the charger to hold additional properties.
> +		If a battery is not in use, this node can be omitted. If a
> +		battery node is used, the following values are required:
> +		rockchip,resistor-sense, rockchip,sleep-enter-current,
> +		rockchip,sleep-filter-current, and a phandle to a
> +		monitored-battery node that contains a valid value for
> +		charge-full-design-microamp-hours,
> +		charge-term-current-microamp,
> +		constant-charge-current-max-microamp,
> +		constant-charge-voltage-max-microvolt,
> +		voltage-max-design-microvolt, voltage-min-design-microvolt,
> +		and a valid ocv-capacity table.
> +- rockchip,resistor-sense: Value in microohms of the battery sense resistor.
> +			   The PMIC only supports values of either 10000 or
> +			   20000. This value is used by the driver to set
> +			   the correct divisor value to translate ADC readings
> +			   into the proper units of measure.
> +- rockchip,sleep-enter-current: Value in microamps of the sleep enter current
> +				for the charger. Value is used by the driver
> +				to calibrate the relax threshold.
> +- rockchip,sleep-filter-current: Value in microamps of the sleep filter current
> +				 for the charger. Value is used by the driver
> +				 to derive the sleep sample current.
> +
>  Optional RK818 properties:
>  - vcc1-supply:  The input supply for DCDC_REG1
>  - vcc2-supply:  The input supply for DCDC_REG2
> @@ -459,6 +483,13 @@ Example:
>  			};
>  		};
>  
> +		rk817_battery: battery {
> +			monitored-battery = <&battery_cell>;
> +			rockchip,resistor-sense = <10000>;
> +			rockchip,sleep-enter-current = <300000>;
> +			rockchip,sleep-filter-current = <100000>;
> +		};
> +
>  		rk817_codec: codec {
>  			rockchip,mic-in-differential;
>  		};
> -- 
> 2.25.1
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20210809/2fb41c60/attachment.sig>