[PATCH 1/3] arm64: dts: rockchip: Remove unnecessary reset in rk3328.dtsi

[Ezequiel Garcia]

Rockchip DWMAC glue driver uses the phy node (phy-handle)
reset specifier, and not a "mac-phy" reset specifier.

Remove it.

Signed-off-by: Ezequiel Garcia <ezequiel at collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 5bab61784735..3ed69ecbcf3c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -916,8 +916,8 @@ gmac2phy: ethernet at ff550000 {
 			      "mac_clk_tx", "clk_mac_ref",
 			      "aclk_mac", "pclk_mac",
 			      "clk_macphy";
-		resets = <&cru SRST_GMAC2PHY_A>, <&cru SRST_MACPHY>;
-		reset-names = "stmmaceth", "mac-phy";
+		resets = <&cru SRST_GMAC2PHY_A>;
+		reset-names = "stmmaceth";
 		phy-mode = "rmii";
 		phy-handle = <&phy>;
 		snps,txpbl = <0x4>;
-- 
2.30.0