[PATCH v2] of: address: Work around missing device_type property in pcie nodes

[Bjorn Helgaas]

On Wed, Sep 30, 2020 at 03:34:10PM -0500, Rob Herring wrote:
> On Wed, Sep 30, 2020 at 12:37 PM Niklas Söderlund
> <niklas.soderlund at ragnatech.se> wrote:
> >
> > Hi Marc,
> >
> > On 2020-09-30 18:23:21 +0100, Marc Zyngier wrote:
> > > Hi Niklas,
> > >
> > > [+ Samuel]
> > >
> > > On 2020-09-30 17:27, Niklas Söderlund wrote:
> > > > Hi Marc,
> > > >
> > > > I'm afraid this commit breaks booting my rk3399 device.
> > > >
> > > > I bisected the problem to this patch merged as [1]. I'm testing on a
> > > > Scarlet device and I'm using the unmodified upstream
> > > > rk3399-gru-scarlet-inx.dtb for my tests.
> > > >
> > > > The problem I'm experience is a black screen after the bootloader and
> > > > the device is none responsive over the network. I have no serial console
> > > > to this device so I'm afraid I can't tell you if there is anything
> > > > useful on to aid debugging there.
> > > >
> > > > If I try to test one commit earlier [2] the system boots as expected and
> > > > everything works as it did for me in v5.8 and earlier. I have worked
> > > > little with this device and have no clue about what is really on the PCI
> > > > buss. But running from [2] I have this info about PCI if it's helpful,
> > > > please ask if somethings missing.
> > >
> > > Please see the thread at [1]. The problem was reported a few weeks back
> > > by Samuel, and I was expecting Rob and Lorenzo to push a fix for this.
> >
> > Thanks for providing a solution.
> >
> > >
> > > Rob, Lorenzo, any update on this?
> 
> The fix is in Bjorn's tree[1].
> 
> Bjorn, going to send this to Linus before v5.9 is out?

Definitely, thanks for the reminder.  I'm assuming the fix in question
is https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/?h=for-linus&id=e338eecf3fe79054e8a31b8c39a1234b5acfdabe

> [1] https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/log/?h=for-linus