[PATCH v4 07/10] media: staging: rkisp1: rsz: enumerate the formats on the src pad according to the capture

[Dafna Hirschfeld]

Currently the resizer outputs the same media bus format
as the input. This is wrong since the resizer is also used
to downscale YUV formats. This patch changes the enumeration
of the supported formats. The supported formats on the sink pad
should be taken from the isp entity and the supported formats on
the source pad should be taken from the capture entity.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld at collabora.com>
---
 drivers/staging/media/rkisp1/rkisp1-resizer.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/rkisp1/rkisp1-resizer.c b/drivers/staging/media/rkisp1/rkisp1-resizer.c
index 066d22096a7d..0e4a2c931ab0 100644
--- a/drivers/staging/media/rkisp1/rkisp1-resizer.c
+++ b/drivers/staging/media/rkisp1/rkisp1-resizer.c
@@ -437,6 +437,17 @@ static int rkisp1_rsz_enum_mbus_code(struct v4l2_subdev *sd,
 	u32 pad = code->pad;
 	int ret;
 
+	if (code->pad == RKISP1_RSZ_PAD_SRC) {
+		/* supported mbus codes on the src are the same as in the capture */
+		struct rkisp1_capture *cap = &rsz->rkisp1->capture_devs[rsz->id];
+
+		return rkisp1_cap_enum_mbus_codes(cap, code);
+	}
+
+	/*
+	 * The selfpath capture doesn't support bayer formats. Therefore the selfpath resizer
+	 * should support only YUV422 on the sink pad
+	 */
 	if (rsz->id == RKISP1_SELFPATH) {
 		if (code->index > 0)
 			return -EINVAL;
@@ -444,7 +455,7 @@ static int rkisp1_rsz_enum_mbus_code(struct v4l2_subdev *sd,
 		return 0;
 	}
 
-	/* supported mbus codes are the same in isp video src pad */
+	/* supported mbus codes on the sink pad are the same as isp src pad */
 	code->pad = RKISP1_ISP_PAD_SOURCE_VIDEO;
 	ret = v4l2_subdev_call(&rsz->rkisp1->isp.sd, pad, enum_mbus_code,
 			       &dummy_cfg, code);
-- 
2.17.1