[PATCH v5 8/9] arm64: dts: rockchip: add isp0 node for rk3399

[Helen Koike]

Hi Tomasz,

On 9/26/20 10:00 AM, Tomasz Figa wrote:
> Hi Helen,
> 
> On Wed, Jul 22, 2020 at 12:55:32PM -0300, Helen Koike wrote:
>> From: Shunqian Zheng <zhengsq at rock-chips.com>
>>
>> RK3399 has two ISPs, but only isp0 was tested.
>> Add isp0 node in rk3399 dtsi
>>
>> Verified with:
>> make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml
>>
>> Signed-off-by: Shunqian Zheng <zhengsq at rock-chips.com>
>> Signed-off-by: Jacob Chen <jacob2.chen at rock-chips.com>
>> Signed-off-by: Helen Koike <helen.koike at collabora.com>
>>
>> ---
>>
>> V4:
>> - update clock names
>>
>> V3:
>> - clean up clocks
>>
>> V2:
>> - re-order power-domains property
>>
>> V1:
>> This patch was originally part of this patchset:
>>
>>     https://patchwork.kernel.org/patch/10267431/
>>
>> The only difference is:
>> - add phy properties
>> - add ports
>> ---
>>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 25 ++++++++++++++++++++++++
>>  1 file changed, 25 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> index dba9641947a3a..ed8ba75dbbce8 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> @@ -1721,6 +1721,31 @@ vopb_mmu: iommu at ff903f00 {
>>  		status = "disabled";
>>  	};
>>  
>> +	isp0: isp0 at ff910000 {
>> +		compatible = "rockchip,rk3399-cif-isp";
>> +		reg = <0x0 0xff910000 0x0 0x4000>;
>> +		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
>> +		clocks = <&cru SCLK_ISP0>,
>> +			 <&cru ACLK_ISP0_WRAPPER>,
>> +			 <&cru HCLK_ISP0_WRAPPER>;
>> +		clock-names = "isp", "aclk", "hclk";
>> +		iommus = <&isp0_mmu>;
>> +		phys = <&mipi_dphy_rx0>;
>> +		phy-names = "dphy";
>> +		power-domains = <&power RK3399_PD_ISP0>;
> 
> Should this have status = "disabled" too? The mipi_dphy_rx0 node is
> disabled by default too, so in the default configuration the driver
> would always fail to probe.

I'm thinking what is the overall guideline here.
Since isp and mipi_dphy are always present in the rk3399, shouldn't they always be enabled?
Or since they are only useful if a sensor is present, we should let the dts of the board to
enable it?

Thanks
Helen

> 
> Best regards,
> Tomasz
>