[PATCH 13/18] media: hantro: add VC8000D postproc support
Adrian Ratiu
adrian.ratiu at collabora.com
Mon Oct 12 16:59:52 EDT 2020
VC8000D decodes only to 4x4 tiled NV12 format and the attached PP
can be used to de-tile its output. This can bo done in two modes:
1. Pipeline mode, using the same decoder "done" irq
2. External mode, with a separate irq and input setup.
This adds the relevant postprocessor fields and support for pipeline
mode de-tiling.
Signed-off-by: Adrian Ratiu <adrian.ratiu at collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel at collabora.com>
---
.../staging/media/hantro/hantro_postproc.c | 58 ++++++++++++++++---
drivers/staging/media/hantro/hantro_regmap.c | 41 +++++++++++++
drivers/staging/media/hantro/hantro_regmap.h | 8 +++
3 files changed, 98 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/media/hantro/hantro_postproc.c b/drivers/staging/media/hantro/hantro_postproc.c
index 6d1705a60d36..a6b3e243dc39 100644
--- a/drivers/staging/media/hantro/hantro_postproc.c
+++ b/drivers/staging/media/hantro/hantro_postproc.c
@@ -20,22 +20,35 @@
#define VPU_PP_OUT_RGB 0x0
#define VPU_PP_OUT_YUYV 0x3
+#define VC8000D_PP_OUT_NV12 0x0
+
void hantro_postproc_enable(struct hantro_ctx *ctx)
{
struct hantro_regmap_fields_dec *fields = ctx->dev->reg_fields_dec;
struct vb2_v4l2_buffer *dst_buf;
- u32 src_pp_fmt, dst_pp_fmt;
+ u32 src_pp_fmt, dst_pp_fmt, in_width, in_height;
dma_addr_t dst_dma;
/* Turn on pipeline mode. Must be done first. */
regmap_field_write(fields->pp_pipeline_en, 1);
+ /*
+ * use NV12 as input format for pipeline mode as that's what decoder
+ * outputs, on VC8000D it is 4x4 tiled NV12.
+ */
src_pp_fmt = VPU_PP_IN_NV12;
switch (ctx->vpu_dst_fmt->fourcc) {
case V4L2_PIX_FMT_YUYV:
dst_pp_fmt = VPU_PP_OUT_YUYV;
break;
+ case V4L2_PIX_FMT_NV12:
+ /* src == dst == NV12 only makes sense to de-tile on VC8000D */
+ if (ctx->dev->core_hw_dec_rev == HANTRO_VC8000_REV) {
+ dst_pp_fmt = VC8000D_PP_OUT_NV12;
+ break;
+ }
+ fallthrough;
default:
WARN(1, "output format %d not supported by the post-processor, this wasn't expected.",
ctx->vpu_dst_fmt->fourcc);
@@ -46,19 +59,46 @@ void hantro_postproc_enable(struct hantro_ctx *ctx)
dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
dst_dma = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
- regmap_field_write(fields->pp_clk_gate, 1);
- regmap_field_write(fields->pp_out_endian, 1);
- regmap_field_write(fields->pp_out_swap32, 1);
- regmap_field_write(fields->pp_max_burst, 16);
+ switch (ctx->dev->core_hw_dec_rev) {
+ case HANTRO_G1_REV:
+ regmap_field_write(fields->pp_clk_gate, 1);
+ regmap_field_write(fields->pp_out_endian, 1);
+ regmap_field_write(fields->pp_out_swap32, 1);
+ regmap_field_write(fields->pp_max_burst, 16);
+ regmap_field_write(fields->pp_orig_width, MB_WIDTH(ctx->dst_fmt.width));
+ regmap_field_write(fields->pp_display_width, ctx->dst_fmt.width);
+ in_width = MB_WIDTH(ctx->src_fmt.width);
+ in_height = MB_WIDTH(ctx->src_fmt.height);
+ break;
+ case HANTRO_VC8000_REV:
+ /* on VC8000D the PP is used to de-tile decoder output */
+ regmap_field_write(fields->pp_out_tile_e, 0);
+
+ regmap_field_write(fields->pp_out_y_stride, ctx->dst_fmt.width);
+ regmap_field_write(fields->pp_out_c_stride, ctx->dst_fmt.width);
+
+ regmap_field_write(fields->pp_out_chroma_base, dst_dma +
+ ctx->dst_fmt.width * ctx->dst_fmt.height);
+
+ /* VC8000D input resolution is a 2-pixels length. */
+ in_width = ctx->src_fmt.width / 2;
+ in_height = ctx->src_fmt.height / 2;
+
+ break;
+ default:
+ vpu_err("PP does not recognize HW revision: %x, disabling\n",
+ ctx->dev->core_hw_dec_rev);
+ hantro_postproc_disable(ctx);
+ return;
+ }
+
regmap_field_write(fields->pp_out_luma_base, dst_dma);
- regmap_field_write(fields->pp_input_width, MB_WIDTH(ctx->dst_fmt.width));
- regmap_field_write(fields->pp_input_height, MB_HEIGHT(ctx->dst_fmt.height));
+ regmap_field_write(fields->pp_input_width, in_width);
+ regmap_field_write(fields->pp_input_height, in_height);
regmap_field_write(fields->pp_input_fmt, src_pp_fmt);
regmap_field_write(fields->pp_output_fmt, dst_pp_fmt);
regmap_field_write(fields->pp_output_width, ctx->dst_fmt.width);
regmap_field_write(fields->pp_output_height, ctx->dst_fmt.height);
- regmap_field_write(fields->pp_orig_width, MB_WIDTH(ctx->dst_fmt.width));
- regmap_field_write(fields->pp_display_width, ctx->dst_fmt.width);
}
void hantro_postproc_free(struct hantro_ctx *ctx)
diff --git a/drivers/staging/media/hantro/hantro_regmap.c b/drivers/staging/media/hantro/hantro_regmap.c
index 0e74ba69034f..b87fe809f2f7 100644
--- a/drivers/staging/media/hantro/hantro_regmap.c
+++ b/drivers/staging/media/hantro/hantro_regmap.c
@@ -75,6 +75,10 @@ struct hantro_field_dec {
struct reg_field cfg_pp_out_swap32;
struct reg_field cfg_pp_out_endian;
struct reg_field cfg_pp_out_luma_base;
+ struct reg_field cfg_pp_out_chroma_base;
+ struct reg_field cfg_pp_in_luma_base;
+ struct reg_field cfg_pp_in_chroma_base;
+ struct reg_field cfg_pp_out_tile_e;
struct reg_field cfg_pp_input_width;
struct reg_field cfg_pp_input_height;
struct reg_field cfg_pp_output_width;
@@ -93,6 +97,10 @@ struct hantro_field_dec {
struct reg_field cfg_pp_scale_hratio;
struct reg_field cfg_pp_scale_inv_wratio;
struct reg_field cfg_pp_scale_inv_hratio;
+ struct reg_field cfg_pp_out_c_stride;
+ struct reg_field cfg_pp_out_y_stride;
+ struct reg_field cfg_pp_in_c_stride;
+ struct reg_field cfg_pp_in_y_stride;
};
struct hantro_field_enc {
@@ -181,6 +189,31 @@ static const struct hantro_field_dec vc8000d_field = {
.cfg_dec_ext_timeout_e = REG_FIELD(SWREG(318), 31, 31),
.cfg_dec_timeout_cycles = REG_FIELD(SWREG(319), 0, 30),
.cfg_dec_timeout_e = REG_FIELD(SWREG(319), 31, 31),
+ .cfg_pp_pipeline_en = REG_FIELD(SWREG(320), 0, 0),
+ .cfg_pp_out_tile_e = REG_FIELD(SWREG(320), 3, 3),
+ .cfg_pp_output_fmt = REG_FIELD(SWREG(322), 18, 22),
+ .cfg_pp_input_fmt = REG_FIELD(SWREG(322), 27, 31),
+ .cfg_pp_out_luma_base = REG_FIELD(SWREG(326), 0, 31),
+ .cfg_pp_out_chroma_base = REG_FIELD(SWREG(328), 0, 31),
+ .cfg_pp_in_luma_base = REG_FIELD(SWREG(339), 0, 31),
+ .cfg_pp_in_chroma_base = REG_FIELD(SWREG(341), 0, 31),
+ .cfg_pp_input_height = REG_FIELD(SWREG(331), 0, 15),
+ .cfg_pp_input_width = REG_FIELD(SWREG(331), 16, 31),
+ .cfg_pp_output_height = REG_FIELD(SWREG(332), 0, 15),
+ .cfg_pp_output_width = REG_FIELD(SWREG(332), 16, 31),
+ .cfg_pp_crop_starty = REG_FIELD(SWREG(330), 0, 12),
+ .cfg_pp_rotation_mode = REG_FIELD(SWREG(330), 13, 14),
+ .cfg_pp_crop_startx = REG_FIELD(SWREG(330), 16, 28),
+ .cfg_pp_vscale_mode = REG_FIELD(SWREG(322), 23, 24),
+ .cfg_pp_hscale_mode = REG_FIELD(SWREG(322), 25, 26),
+ .cfg_pp_scale_wratio = REG_FIELD(SWREG(323), 0, 17),
+ .cfg_pp_scale_hratio = REG_FIELD(SWREG(322), 0, 17),
+ .cfg_pp_scale_inv_wratio = REG_FIELD(SWREG(324), 16, 31),
+ .cfg_pp_scale_inv_hratio = REG_FIELD(SWREG(324), 0, 15),
+ .cfg_pp_out_c_stride = REG_FIELD(SWREG(329), 0, 15),
+ .cfg_pp_out_y_stride = REG_FIELD(SWREG(329), 16, 31),
+ .cfg_pp_in_c_stride = REG_FIELD(SWREG(337), 0, 15),
+ .cfg_pp_in_y_stride = REG_FIELD(SWREG(337), 16, 31),
};
#define INIT_FIELD_CFG(f, codec, conf) ({ \
@@ -246,6 +279,14 @@ static int hantro_regmap_fields_init_dec(struct hantro_dev *vpu,
INIT_DEC_FIELD(pp_out_swap32);
INIT_DEC_FIELD(pp_out_endian);
INIT_DEC_FIELD(pp_out_luma_base);
+ INIT_DEC_FIELD(pp_out_chroma_base);
+ INIT_DEC_FIELD(pp_out_tile_e);
+ INIT_DEC_FIELD(pp_out_c_stride);
+ INIT_DEC_FIELD(pp_out_y_stride);
+ INIT_DEC_FIELD(pp_in_c_stride);
+ INIT_DEC_FIELD(pp_in_y_stride);
+ INIT_DEC_FIELD(pp_in_luma_base);
+ INIT_DEC_FIELD(pp_in_chroma_base);
INIT_DEC_FIELD(pp_input_width);
INIT_DEC_FIELD(pp_input_height);
INIT_DEC_FIELD(pp_output_width);
diff --git a/drivers/staging/media/hantro/hantro_regmap.h b/drivers/staging/media/hantro/hantro_regmap.h
index 8ec0020f40c3..0a39bae83f85 100644
--- a/drivers/staging/media/hantro/hantro_regmap.h
+++ b/drivers/staging/media/hantro/hantro_regmap.h
@@ -65,6 +65,10 @@ struct hantro_regmap_fields_dec {
struct regmap_field *pp_out_swap32;
struct regmap_field *pp_out_endian;
struct regmap_field *pp_out_luma_base;
+ struct regmap_field *pp_out_chroma_base;
+ struct regmap_field *pp_in_luma_base;
+ struct regmap_field *pp_in_chroma_base;
+ struct regmap_field *pp_out_tile_e;
struct regmap_field *pp_input_width;
struct regmap_field *pp_input_height;
struct regmap_field *pp_output_width;
@@ -83,6 +87,10 @@ struct hantro_regmap_fields_dec {
struct regmap_field *pp_scale_hratio;
struct regmap_field *pp_scale_inv_wratio;
struct regmap_field *pp_scale_inv_hratio;
+ struct regmap_field *pp_out_y_stride;
+ struct regmap_field *pp_out_c_stride;
+ struct regmap_field *pp_in_y_stride;
+ struct regmap_field *pp_in_c_stride;
};
struct hantro_regmap_fields_enc {
--
2.28.0
More information about the Linux-rockchip
mailing list