[PATCH 3/4] arm64: dts: rockchip: add rk3328 usb3 and usb3phy nodes

[Johan Jonker]

Hi Peter,

Just some comments...

The compatible "rockchip,rk3328-dwc3" is currently under test in:

https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git/

I think we should let it go in mainline first
(if the maintainers agree?) and then you can base your serie on that.

The compatible "rockchip,rk3328-usb3phy" needs to be added to a document
as well.

Add increase version number after previous series.

Is there any change in code or on how you detect?

On 11/16/20 4:17 PM, Peter Geis wrote:
> Add the usb3 controller and usb3 phy nodes to the rk3328.
> 
> Signed-off-by: Peter Geis <pgwipeout at gmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3328.dtsi | 65 ++++++++++++++++++++++++
>  1 file changed, 65 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> index bbdb19a3e85d..9fea9203d114 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> @@ -853,6 +853,40 @@ u2phy_host: host-port {
>  		};
>  	};
>  
> +	usb3phy: usb3-phy at ff470000 {
> +		compatible = "rockchip,rk3328-usb3phy";
> +		reg = <0x0 0xff460000 0x0 0x10000>;
> +		clocks = <&cru PCLK_USB3PHY_OTG>, <&cru PCLK_USB3PHY_PIPE>;
> +		clock-names = "usb3phy-otg", "usb3phy-pipe";
> +		resets = <&cru SRST_USB3PHY_U2>,
> +			 <&cru SRST_USB3PHY_U3>,
> +			 <&cru SRST_USB3PHY_PIPE>,
> +			 <&cru SRST_USB3OTG_UTMI>,
> +			 <&cru SRST_USB3PHY_OTG_P>,
> +			 <&cru SRST_USB3PHY_PIPE_P>;
> +		reset-names = "usb3phy-u2-por", "usb3phy-u3-por",
> +			      "usb3phy-pipe-mac", "usb3phy-utmi-mac",
> +			      "usb3phy-utmi-apb", "usb3phy-pipe-apb";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +		status = "disabled";
> +
> +		usb3phy_utmi: utmi at ff470000 {
> +			compatible = "rockchip,rk3328-usb3phy-utmi";
> +			reg = <0x0 0xff470000 0x0 0x8000>;
> +			#phy-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		usb3phy_pipe: pipe at ff478000 {
> +			compatible = "rockchip,rk3328-usb3phy-pipe";
> +			reg = <0x0 0xff478000 0x0 0x8000>;
> +			#phy-cells = <0>;
> +			status = "disabled";
> +		};
> +	};
> +
>  	sdmmc: mmc at ff500000 {
>  		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
>  		reg = <0x0 0xff500000 0x0 0x4000>;
> @@ -983,6 +1017,37 @@ usb_host0_ohci: usb at ff5d0000 {
>  		status = "disabled";
>  	};
>  
> +       usbdrd3: usb at ff600000 {
> +		compatible = "rockchip,rk3328-dwc3";
> +		clocks = <&cru SCLK_USB3OTG_REF>, <&cru ACLK_USB3OTG>,
> +			 <&cru SCLK_USB3OTG_SUSPEND>;
> +		clock-names = "ref", "bus_early", "suspend";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +		status = "disabled";
> +
> +		usbdrd_dwc3: dwc3 at ff600000 {
> +			compatible = "snps,dwc3";
> +			reg = <0x0 0xff600000 0x0 0x100000>;
> +			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cru SCLK_USB3OTG_REF>, <&cru ACLK_USB3OTG>,
> +				 <&cru SCLK_USB3OTG_SUSPEND>;
> +			clock-names = "ref", "bus_early", "suspend";
> +			dr_mode = "host";
> +			usb-phy = <&usb3phy_utmi>, <&usb3phy_pipe>;
> +			phy_type = "utmi_wide";
> +			snps,dis_enblslpm_quirk;
> +			snps,dis-u2-freeclk-exists-quirk;
> +			snps,dis_u2_susphy_quirk;
> +			snps,dis_u3_susphy_quirk;
> +			snps,dis-del-phy-power-chg-quirk;
> +			snps,dis-tx-ipgap-linecheck-quirk;
> +			snps,xhci-trb-ent-quirk;
> +			status = "disabled";
> +		};
> +	};
> +
>  	gic: interrupt-controller at ff811000 {
>  		compatible = "arm,gic-400";
>  		#interrupt-cells = <3>;
>