[RFC v3 1/2] v4l2: add support for colorspace conversion for video capture
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Tue Jun 30 13:43:47 EDT 2020
Hi Tomasz,
On Tue, Jun 30, 2020 at 06:31:19PM +0200, Tomasz Figa wrote:
> On Tue, Jun 30, 2020 at 6:11 PM Dafna Hirschfeld wrote:
> > On 10.06.20 15:34, Tomasz Figa wrote:
> >> On Fri, Jun 05, 2020 at 12:11:33PM +0200, Dafna Hirschfeld wrote:
> >>> On 04.06.20 19:39, Tomasz Figa wrote:
> >>>> On Thu, Apr 16, 2020 at 04:56:04PM +0200, Dafna Hirschfeld wrote:
> >>>>> From: Philipp Zabel <p.zabel at pengutronix.de>
> >>>>>
> >>>>> For video capture it is the driver that reports the colorspace,
> >>>>> Y'CbCr/HSV encoding, quantization range and transfer function
> >>>>> used by the video, and there is no way to request something
> >>>>> different, even though many HDTV receivers have some sort of
> >>>>> colorspace conversion capabilities.
> >>>>
> >>>> Thanks for working on this! Please see my comments inline.
> >>>>
> >>>>> For output video this feature already exists since the application
> >>>>> specifies this information for the video format it will send out, and
> >>>>> the transmitter will enable any available CSC if a format conversion has
> >>>>> to be performed in order to match the capabilities of the sink.
> >>>>>
> >>>>> For video capture we propose adding new pix_format flag:
> >>>>> V4L2_PIX_FMT_FLAG_HAS_CSC. The flag is set by the application,
> >>>>> the driver will interpret the ycbcr_enc/hsv_enc, and quantization fields
> >>>>> as the requested colorspace information and will attempt to
> >>>>> do the conversion it supports.
> >>>>>
> >>>>> Drivers set the flags
> >>>>> V4L2_FMT_FLAG_CSC_YCBCR_ENC,
> >>>>> V4L2_FMT_FLAG_CSC_HSV_ENC,
> >>>>> V4L2_FMT_FLAG_CSC_HSV_QUANTIZATION,
> >>>>
> >>>> Do we need this level of granularity? The drivers would ignore
> >>>> unsupported encoding/quantization settings and reset them to supported
> >>>> ones anyway, so if one doesn't support changing given parameter, it
> >>>> would just return back the original stream parameter.
> >>>
> >>> I think this granularity allows userspace to know ahead what is supported
> >>> and what is not so it doesn't have to guess.
> >>>
> >>
> >> The userspace needs to guess anyway, because there is no way to
> >> enumerate the supported target parameters. For example, even if the
> >> CSC_YCBCR_ENC bit is set, only only DEFAULT, 601 and BT2020 could be
> >> supported. If the userspace wants to get the 709 encoding, it needs to
> >> explicitly try setting it and see if the TRY_FMT/S_FMT operation accepts
> >> the setting.
> >
> > yes, indeed, Hans Verkuil suggested those flags. Maybe it is indeed enough
> > to have one flag.
> >
>
> Hans, what's your thought on this?
>
> >>
> >> [snip]
> >>>>> diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
> >>>>> index a376b351135f..51e009936aad 100644
> >>>>> --- a/drivers/media/v4l2-core/v4l2-subdev.c
> >>>>> +++ b/drivers/media/v4l2-core/v4l2-subdev.c
> >>>>> @@ -477,6 +477,13 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg)
> >>>>> case VIDIOC_SUBDEV_S_FMT: {
> >>>>> struct v4l2_subdev_format *format = arg;
> >>>>> + if (!(format->format.flags & V4L2_MBUS_FRAMEFMT_HAS_CSC)) {
> >>>>> + format->format.colorspace = V4L2_COLORSPACE_DEFAULT;
> >>>>> + format->format.xfer_func = V4L2_XFER_FUNC_DEFAULT;
> >>>>> + format->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> >>>>> + format->format.quantization = V4L2_QUANTIZATION_DEFAULT;
> >>>>> + }
> >>>>
> >>>> Wouldn't this break setting the colorspaces on the sink pads, for which
> >>>> the flag isn't required? Actually there is some unfortunate statement in
> >>>> the documentation related to this:
> >>>>
> >>>> "This information supplements the colorspace and must be set by the
> >>>> driver for capture streams and by the application for output streams,
> >>>> see Colorspaces."
> >>>>
> >>>> However, I don't think there is any notion of "capture" and "output" for
> >>>> subdevices, right? Instead, the pad direction would have to be checked,
> >>>> but AFAICT there is no access to this kind of information from this
> >>>> wrapper.
> >>>
> >>> Actually in coming v4 there is no new code added accept of the new fields and
> >>> macros of the API. I think there is no need to change any code.
> >>
> >> Agreed.
> >>
> >>>>> +
> >>>>> memset(format->reserved, 0, sizeof(format->reserved));
> >>>>> memset(format->format.reserved, 0, sizeof(format->format.reserved));
> >>>>> return v4l2_subdev_call(sd, pad, set_fmt, subdev_fh->pad, format);
> >>>>> diff --git a/include/uapi/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h
> >>>>> index 123a231001a8..89ff0ad6a631 100644
> >>>>> --- a/include/uapi/linux/v4l2-mediabus.h
> >>>>> +++ b/include/uapi/linux/v4l2-mediabus.h
> >>>>> @@ -16,6 +16,8 @@
> >>>>> #include <linux/types.h>
> >>>>> #include <linux/videodev2.h>
> >>>>> +#define V4L2_MBUS_FRAMEFMT_HAS_CSC 0x0001
> >>>>> +
> >>>>> /**
> >>>>> * struct v4l2_mbus_framefmt - frame format on the media bus
> >>>>> * @width: image width
> >>>>> @@ -36,7 +38,8 @@ struct v4l2_mbus_framefmt {
> >>>>> __u16 ycbcr_enc;
> >>>>> __u16 quantization;
> >>>>> __u16 xfer_func;
> >>>>> - __u16 reserved[11];
> >>>>> + __u16 flags;
> >>>>
> >>>> Are we okay with a u16 for flags?
> >>>
> >>> I am fine with it, though don't mind changing it if there are objections.
> >>>
> >>
> >> I'd suggest making it a u32 to be a bit more future-proof.
> >
> > ok, I see that just changing the type to __u32 and the reserved array
> > to 'reserved[9]' increases the struct size from 48 to 52 because of padding.
> > There are two ways to solve it,
> > - move the flags field to be just above 'ycbcr_enc'
> > - change reserve to 'reserve[8]'
> >
> > Is moving fields order in a struct ok? If so it save us 2 bytes.
>
> Since the structure is a part of the stable UAPI, we can't reorder the
> fields. Similarly, we can't change the struct size, because it's
> embedded in the ioctl code. (Although there are ways around it, not
> currently implemented by V4L2.) That leaves us only the second option
> - changing reserved to [8].
You can also possibly do
__u16 ycbcr_enc;
__u16 quantization;
__u16 xfer_func;
__u16 reserved2;
__u32 flags;
__u16 reserved[8];
to explicitly show there's a hole.
--
Regards,
Laurent Pinchart
More information about the Linux-rockchip
mailing list