[PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum

[Bartlomiej Zolnierkiewicz]

On 5/28/20 9:20 PM, Andrzej Pietrasiewicz wrote:
> Prepare for storing mode in struct thermal_zone_device.
> 
> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p at collabora.com>

Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie at samsung.com>

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

> ---
>  drivers/acpi/thermal.c                        | 27 +++++++++----------
>  drivers/platform/x86/acerhdf.c                |  8 ++++--
>  .../intel/int340x_thermal/int3400_thermal.c   | 18 +++++--------
>  3 files changed, 25 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
> index 6de8066ca1e7..fb46070c66d8 100644
> --- a/drivers/acpi/thermal.c
> +++ b/drivers/acpi/thermal.c
> @@ -172,7 +172,7 @@ struct acpi_thermal {
>  	struct acpi_thermal_trips trips;
>  	struct acpi_handle_list devices;
>  	struct thermal_zone_device *thermal_zone;
> -	int tz_enabled;
> +	enum thermal_device_mode mode;
>  	int kelvin_offset;	/* in millidegrees */
>  	struct work_struct thermal_check_work;
>  };
> @@ -500,7 +500,7 @@ static void acpi_thermal_check(void *data)
>  {
>  	struct acpi_thermal *tz = data;
>  
> -	if (!tz->tz_enabled)
> +	if (tz->mode != THERMAL_DEVICE_ENABLED)
>  		return;
>  
>  	thermal_zone_device_update(tz->thermal_zone,
> @@ -534,8 +534,7 @@ static int thermal_get_mode(struct thermal_zone_device *thermal,
>  	if (!tz)
>  		return -EINVAL;
>  
> -	*mode = tz->tz_enabled ? THERMAL_DEVICE_ENABLED :
> -		THERMAL_DEVICE_DISABLED;
> +	*mode = tz->mode;
>  
>  	return 0;
>  }
> @@ -544,27 +543,25 @@ static int thermal_set_mode(struct thermal_zone_device *thermal,
>  				enum thermal_device_mode mode)
>  {
>  	struct acpi_thermal *tz = thermal->devdata;
> -	int enable;
>  
>  	if (!tz)
>  		return -EINVAL;
>  
> +	if (mode != THERMAL_DEVICE_DISABLED &&
> +	    mode != THERMAL_DEVICE_ENABLED)
> +		return -EINVAL;
>  	/*
>  	 * enable/disable thermal management from ACPI thermal driver
>  	 */
> -	if (mode == THERMAL_DEVICE_ENABLED)
> -		enable = 1;
> -	else if (mode == THERMAL_DEVICE_DISABLED) {
> -		enable = 0;
> +	if (mode == THERMAL_DEVICE_DISABLED)
>  		pr_warn("thermal zone will be disabled\n");
> -	} else
> -		return -EINVAL;
>  
> -	if (enable != tz->tz_enabled) {
> -		tz->tz_enabled = enable;
> +	if (mode != tz->mode) {
> +		tz->mode = mode;
>  		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
>  			"%s kernel ACPI thermal control\n",
> -			tz->tz_enabled ? "Enable" : "Disable"));
> +			tz->mode == THERMAL_DEVICE_ENABLED ?
> +			"Enable" : "Disable"));
>  		acpi_thermal_check(tz);
>  	}
>  	return 0;
> @@ -915,7 +912,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
>  		goto remove_dev_link;
>  	}
>  
> -	tz->tz_enabled = 1;
> +	tz->mode = THERMAL_DEVICE_ENABLED;
>  
>  	dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
>  		 tz->thermal_zone->id);
> diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
> index 8cc86f4e3ac1..830a8b060e74 100644
> --- a/drivers/platform/x86/acerhdf.c
> +++ b/drivers/platform/x86/acerhdf.c
> @@ -68,6 +68,7 @@ static int kernelmode = 1;
>  #else
>  static int kernelmode;
>  #endif
> +static enum thermal_device_mode thermal_mode;
>  
>  static unsigned int interval = 10;
>  static unsigned int fanon = 60000;
> @@ -397,6 +398,7 @@ static inline void acerhdf_revert_to_bios_mode(void)
>  {
>  	acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
>  	kernelmode = 0;
> +	thermal_mode = THERMAL_DEVICE_DISABLED;
>  	if (thz_dev)
>  		thz_dev->polling_delay = 0;
>  	pr_notice("kernel mode fan control OFF\n");
> @@ -404,6 +406,7 @@ static inline void acerhdf_revert_to_bios_mode(void)
>  static inline void acerhdf_enable_kernelmode(void)
>  {
>  	kernelmode = 1;
> +	thermal_mode = THERMAL_DEVICE_ENABLED;
>  
>  	thz_dev->polling_delay = interval*1000;
>  	thermal_zone_device_update(thz_dev, THERMAL_EVENT_UNSPECIFIED);
> @@ -416,8 +419,7 @@ static int acerhdf_get_mode(struct thermal_zone_device *thermal,
>  	if (verbose)
>  		pr_notice("kernel mode fan control %d\n", kernelmode);
>  
> -	*mode = (kernelmode) ? THERMAL_DEVICE_ENABLED
> -			     : THERMAL_DEVICE_DISABLED;
> +	*mode = thermal_mode;
>  
>  	return 0;
>  }
> @@ -739,6 +741,8 @@ static int __init acerhdf_register_thermal(void)
>  	if (IS_ERR(cl_dev))
>  		return -EINVAL;
>  
> +	thermal_mode = kernelmode ?
> +		THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED;
>  	thz_dev = thermal_zone_device_register("acerhdf", 2, 0, NULL,
>  					      &acerhdf_dev_ops,
>  					      &acerhdf_zone_params, 0,
> diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
> index 0b3a62655843..e84faaadff87 100644
> --- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
> +++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
> @@ -48,7 +48,7 @@ struct int3400_thermal_priv {
>  	struct acpi_device *adev;
>  	struct platform_device *pdev;
>  	struct thermal_zone_device *thermal;
> -	int mode;
> +	enum thermal_device_mode mode;
>  	int art_count;
>  	struct art *arts;
>  	int trt_count;
> @@ -395,24 +395,20 @@ static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
>  				enum thermal_device_mode mode)
>  {
>  	struct int3400_thermal_priv *priv = thermal->devdata;
> -	bool enable;
>  	int result = 0;
>  
>  	if (!priv)
>  		return -EINVAL;
>  
> -	if (mode == THERMAL_DEVICE_ENABLED)
> -		enable = true;
> -	else if (mode == THERMAL_DEVICE_DISABLED)
> -		enable = false;
> -	else
> +	if (mode != THERMAL_DEVICE_ENABLED &&
> +	    mode != THERMAL_DEVICE_DISABLED)
>  		return -EINVAL;
>  
> -	if (enable != priv->mode) {
> -		priv->mode = enable;
> +	if (mode != priv->mode) {
> +		priv->mode = mode;
>  		result = int3400_thermal_run_osc(priv->adev->handle,
> -						 priv->current_uuid_index,
> -						 enable);
> +						priv->current_uuid_index,
> +						mode == THERMAL_DEVICE_ENABLED);
>  	}
>  
>  	evaluate_odvp(priv);
>