[PATCH v6 1/5] PCI: Unify ECAM constants in native PCI Express drivers

Jim Quinlan james.quinlan at broadcom.com
Mon Dec 7 15:29:24 EST 2020


On Sun, Dec 6, 2020 at 10:25 PM Florian Fainelli <f.fainelli at gmail.com> wrote:
>
> +JimQ,
>
> On 12/6/2020 12:16 PM, Krzysztof Wilczyński wrote:
> > Hello Nicolas, Florian and Florian,
> >
> > [...]
> >> -/* Configuration space read/write support */
> >> -static inline int brcm_pcie_cfg_index(int busnr, int devfn, int reg)
> >> -{
> >> -    return ((PCI_SLOT(devfn) & 0x1f) << PCIE_EXT_SLOT_SHIFT)
> >> -            | ((PCI_FUNC(devfn) & 0x07) << PCIE_EXT_FUNC_SHIFT)
> >> -            | (busnr << PCIE_EXT_BUSNUM_SHIFT)
> >> -            | (reg & ~3);
> >> -}
> >> -
> >>  static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn,
> >>                                      int where)
> >>  {
> >> @@ -716,7 +704,7 @@ static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn,
> >>              return PCI_SLOT(devfn) ? NULL : base + where;
> >>
> >>      /* For devices, write to the config space index register */
> >> -    idx = brcm_pcie_cfg_index(bus->number, devfn, 0);
> >> +    idx = PCIE_ECAM_OFFSET(bus->number, devfn, 0);
> >>      writel(idx, pcie->base + PCIE_EXT_CFG_INDEX);
> >>      return base + PCIE_EXT_CFG_DATA + where;
> >>  }
> > [...]
> >
> > Passing the hard-coded 0 as the "reg" argument here never actually did
> > anything, thus the 32 bit alignment was never correctly enforced.
> >
> > My question would be: should this be 32 bit aligned?  It seems like the
> > intention was to perhaps make the alignment?  I am sadly not intimately
> > familiar with his hardware, so I am not sure if there is something to
> > fix here or not.
Hello Krzystzof,

The value gets assigned to our config-space index register, which has
the lower two bits marked "unused".    We're making sure that we are
putting zeroes there but it is most likely not necessary.

> >
> > Also, I wonder whether it would be safe to pass the offset (the "where"
> > variable) rather than hard-coded 0?
The answer is "no" for this code but "maybe" in the future -- allow me
to explain.  We have two methods to access the config space:

(1) Set a designated index register to map to the base of a device's
config-space.  From then we can access a 4k register set.  This is the
method you see in the code and is why we set reg=0 for the index value
and then add "where" to the return address.

(2) Set our index register to the bus/slot/func/reg value, and then we
access a single data register.  In this case we do set the "reg" to
the register value to set the index and then only add "where & 0x3" to
the return address.

As it turns out, (1) is not compatible with some MIPs SOCs that we
still support as they do not have the 4k data register set.  So I may
be changing to (1) in a future pullreq, and if so, I will invoke
PCIE_ECAM_OFFSET(bus->number, devfn, where & ~3);

Regards,
Jim Quinlan
Broadcom STB


> >
> > Thank you for help in advance!
> >
> > Bjorn also asked the same question:
> >   https://lore.kernel.org/linux-pci/20201120203428.GA272511@bjorn-Precision-5520/
> >
> > Krzysztof
> >
>
> --
> Florian

-- 
This electronic communication and the information and any files transmitted 
with it, or attached to it, are confidential and are intended solely for 
the use of the individual or entity to whom it is addressed and may contain 
information that is confidential, legally privileged, protected by privacy 
laws, or otherwise restricted from disclosure to anyone else. If you are 
not the intended recipient or the person responsible for delivering the 
e-mail to the intended recipient, you are hereby notified that any use, 
copying, distributing, dissemination, forwarding, printing, or copying of 
this e-mail is strictly prohibited. If you received this e-mail in error, 
please return the e-mail to the sender, delete it from your computer, and 
destroy any printed copy of it.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4167 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20201207/9dcef6b5/attachment-0001.p7s>


More information about the Linux-rockchip mailing list