[PATCH 2/2] devicetree: phy: rockchip-emmc add output-tapdelay-select

Rob Herring robh at kernel.org
Mon Dec 7 12:21:11 EST 2020


On Wed, Dec 02, 2020 at 04:25:07PM +0800, Chris Ruehl wrote:
> Update the rockchip-emmc-phy.txt and add the u32 property
> 'output-tapdelay-select'. This allow to set the otapdlysec register.
> 
> Tested with our customized rk3399 board to tune eMMC.
> 
> Signed-off-by: Chris Ruehl <chris.ruehl at gtsys.com.hk>
> ---
>  Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
> index 3e4d2d79a65d..00aa2d349e55 100644
> --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
> @@ -18,6 +18,9 @@ Optional properties:
>                          If not set, the default value of 50 will be applied.
>   - enable-strobe-pulldown: Enable internal pull-down for the strobe line.
>                             If not set, pull-down is not used.
> + - output-tapdelay-select: Specifies the phyctrl_otapdlysec register.
> +                           If not set, the register defaults to 0x4.
> +                           Maximum value 0xf.

Needs a vendor prefix.

>  
>  Example:
>  
> -- 
> 2.20.1
> 



More information about the Linux-rockchip mailing list