[PATCH 3/3] arm64: dts: rockchip: use USB host by default on rk3399-rock-pi-4

[Vicente Bergas]

Based on the board schematics at
https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi_4c_v12_sch_20200620.pdf
on page 19 there is an USB Type-A receptacle being used as an USB-OTG port.

But the Type-A connector is not valid for OTG operation, for this reason
there is a switch to select host or device role.
This is non-compliant and error prone because switching is manual.
So, use host mode as it corresponds for a Type-A receptacle.

Signed-off-by: Vicente Bergas <vicencb at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index 63b029a54..fb7599f07 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -673,7 +673,7 @@ &usbdrd3_0 {
 
 &usbdrd_dwc3_0 {
 	status = "okay";
-	dr_mode = "otg";
+	dr_mode = "host";
 };
 
 &usbdrd3_1 {
-- 
2.29.2