[PATCH] arm64: dts: rockchip: replace status value "ok" by "okay"

[Adrian Schmutzler]

While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.

Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
 arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi           | 2 +-
 arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts | 2 +-
 arch/arm64/boot/dts/rockchip/rk3368-r88.dts            | 4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index 1c52f47c43a6..87fabc64cc39 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -134,7 +134,7 @@
 	pinctrl-0 = <&rmii_pins>;
 	tx_delay = <0x30>;
 	rx_delay = <0x10>;
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index b058ce999e3b..ecce16ecc9c3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -183,7 +183,7 @@
 	snps,reset-delays-us = <0 10000 1000000>;
 	tx_delay = <0x30>;
 	rx_delay = <0x10>;
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 236ab0f1b206..2582fa4b90e2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -167,7 +167,7 @@
 	pinctrl-0 = <&rmii_pins>;
 	tx_delay = <0x30>;
 	rx_delay = <0x10>;
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
@@ -198,7 +198,7 @@
 };
 
 &io_domains {
-	status = "ok";
+	status = "okay";
 
 	audio-supply = <&vcc_io>;
 	gpio30-supply = <&vcc_io>;
-- 
2.20.1