[PATCH v2] arm64: dts: rockchip: add SPDIF node for rk3399-rockpro64

[Heiko Stuebner]

Hi,

Am Montag, 10. August 2020, 11:16:19 CEST schrieb Katsuhiro Suzuki:
> This patch adds 'disabled' SPDIF sound node and related settings
> for rk3399-rockpro64.
> 
> There are 2 reasons:
>   - All RK3399 dma-bus channels have been already used by I2S0/1/2
>   - RockPro64 does not have SPDIF optical nor coaxial connector,
>     just have 3pins

I don't really understand what you mean here.

Like is there spdif on the board or not? Because you call it "disabled"
and also indicate that no i2s is available anymore, yet you mention 3 pins.
What do they do then?

Thanks
Heiko


> Signed-off-by: Katsuhiro Suzuki <katsuhiro at katsuster.net>
> 
> ---
> 
> Changes in v2:
>   - Remove redundant status property
> ---
>  .../boot/dts/rockchip/rk3399-rockpro64.dtsi   | 27 +++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> index 6e553ff47534..58097245994a 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> @@ -76,6 +76,23 @@ sound {
>  		dais = <&i2s1_p0>;
>  	};
>  
> +	sound-dit {
> +		compatible = "audio-graph-card";
> +		label = "rockchip,rk3399";
> +		dais = <&spdif_p0>;
> +	};
> +
> +	spdif-dit {
> +		compatible = "linux,spdif-dit";
> +		#sound-dai-cells = <0>;
> +
> +		port {
> +			dit_p0_0: endpoint {
> +				remote-endpoint = <&spdif_p0_0>;
> +			};
> +		};
> +	};
> +
>  	vcc12v_dcin: vcc12v-dcin {
>  		compatible = "regulator-fixed";
>  		regulator-name = "vcc12v_dcin";
> @@ -698,6 +715,16 @@ &sdhci {
>  	status = "okay";
>  };
>  
> +&spdif {
> +	pinctrl-0 = <&spdif_bus_1>;
> +
> +	spdif_p0: port {
> +		spdif_p0_0: endpoint {
> +			remote-endpoint = <&dit_p0_0>;
> +		};
> +	};
> +};
> +
>  &spi1 {
>  	status = "okay";
>  
>